Barnes 104976, Model 2SEV512DS, 2SEV-DS Series, Sewage Pump, 1/2 HP, 120 Volts, 1 Phase, 2" NPT Vertical Flanged Discharge, 110 GPM Max, 39 ft Max Head, 20 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
Barnes 2SEV-DS Submersible Non-Clog Sewage Pump
This is a submersible, non-clog sewage pump designed for typical raw sewage applications. This pump has a double seal and can handle spherical solids up to 2 inch in diameter. It has a torque curved, oil filled, squirrel cage induction motor.
Features
- 2" NPT, female, vertical, bolt-on flanged discharge
- Volute, motor housing, impeller and seal plate are cast iron
- Impeller has a vortex open design with pump out vanes on back side
- 416 stainless steel shaft
- Buna-N square rings
- 300 series stainless steel hardware
- Tandem mechanical seal design made of Carbon/Ceramic/Buna-N with an oil filled reservoir
- Single row, oil lubricated upper and lower ball bearings
- CSA listed
| Brand | Barnes |
| Mfg. Number | 104976 |
| Model | 2SEV512DS |
| Series | 2SE |
| Product Type | Sewage pump |
| Application | Sewage |
| Operation | Manual |
| Horsepower | 1/2 HP |
| Voltage | 120 Volts |
| Phase | 1 |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
| Design | Submersible/Dual Seal |
| Max. Solid Size | 2" |
| Discharge Connection | 2" NPT female, vertical bolt-on flange |
| Motor Insulation | Class B |
| Impeller Type | Vortex, open |
| Maximum Flow | 110 GPM |
| Pump Housing Material | Cast iron |
| Impeller Material | Cast iron |
| Maximum Head | 39 ft |
| Seal Type | Double |
| Paint | Air dry enamel |
| Thermal Protection | Yes |
| Max. Temperature | 104°F |
| Motor Casing Material | Cast iron |
| Power Cord Length | 20 ft. |
| Motor Shaft Material | 416 stainless steel |
| Shaft Seal | Carbo/Ceramic/Buna-N |
| Motor Design | NEMA L |
| Motor Type | Permanent Split Capacitor (PSC) |
| Full Load Current | 12.6 Amps |
| Locked Rotor Current | 24.6 Amps |
| Power Cord Size | 14/3 |
| Cord Type | SJTOW |
The Barnes 2SEV-DS series of engineered sewage ejector pumps is designed for residential and light commercial wastewater applications. Barnes solids handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. Features:
- Heavy duty cast iron construction
- Rugged, oil filled NEMA motors
Applications:
- Residential wastewater
- Light commercial wastewater
- Storm water
- Decorative water features
| BARNES 2SEV-DS SERIES SEWAGE PUMPS |
Barnes 2SEV-DS Series Sewage Pumps
Model Comparison Chart
| Model | Discharge (NPT Vertical Flanged) | HP | Voltage | Phase | GPM | Max. Head |
| 2SEV542DS | 2" | 1/2 | 480 | 3 | 137 | 28' |
| 2SEV552DS | 2" | 1/2 | 600 | 3 | 137 | 28' |
| 2SEV592DS | 2" | 1/2 | 200/240 | 3 | 137 | 28' |
| 2SEV512DS | 2" | 1/2 | 120 | 1 | 110 | 39' |
| 2SEV522DS | 2" | 1/2 | 240 | 1 | 110 | 39' |
| 2SEV1022DS | 2" | 1 | 240 | 1 | 138 | 52' |
| 2SEV1052DS | 2" | 1 | 600 | 3 | 138 | 52' |
| 2SEV1092DS | 2" | 1 | 200/240 | 3 | 138 | 52' |
| 2SEV1042DS | 2" | 1 | 480 | 3 | 138 | 52' |
| 2SEV1522DS | 2" | 1-1/2 | 240 | 1 | 160 | 65' |
| 2SEV1542DS | 2" | 1-1/2 | 480 | 3 | 160 | 65' |
| 2SEV1552DS | 2" | 1-1/2 | 600 | 3 | 160 | 65' |
| 2SEV1592DS | 2" | 1-1/2 | 200/240 | 3 | 160 | 65' |
| 2SEV2022DS | 2" | 2 | 240 | 1 | 162 | 75' |
| 2SEV2052DS | 2" | 2 | 600 | 3 | 162 | 75' |
| 2SEV2092DS | 2" | 2 | 200/240 | 3 | 162 | 75' |
| 2SEV2042DS | 2" | 2 | 480 | 3 | 162 | 75' |
| PERFORMANCE CURVES |
| DIMENSIONS |
| SPECIFICATIONS |
| REPAIR KITS |
| TROUBLESHOOTING |
| BROCHURE |
| Barnes 2SEV-DS Series Sewage Pump Brochure |
| INSTALLATION MANUAL |
| Barnes 2SEV-DS Series Sewage Pump Installation Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
