Goulds J5, Convertible Jet Pump, J+ Series, 1/2 HP, 115/230 Volts, 1 Phase, 1-1/4" NPT Suction, 1" NPT Discharge, Cast Iron Body
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds J+ Convertible Jet Pump
This pump may be used on shallow or deep well applications using appropriate Goulds fittings. It is engineered with a back pullout design for easy service without disturbing piping.
Includes:
- Pump and motor
- Pressure gauge and bushing
- Pressure switch (Part# AS4)
- Tubing and fittings
Please note that if using this pump for NEW INSTALLATIONS in deep well applications, a deepwell jet assembly package in either twin pipe or packer style must be purchased separately (see brochure in Manuals tab for choosing the approprate jet assembly). In addition, a JDW fitting package or an AV22KIT is required to make the pressure switch connection.
Features
- Two compartment motor for access to wiring and replaceable components
- Nozzle clean out plug in shallow well adapter
- Corrosion resistant, plastic tubing and fittings are easily removed for cleaning
- Premium O-ring design fittings need only be hand tight to seal
- Corrosion and abrasion resistant glass filled noryl impeller, F.D.A. compliant
- Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions
- Powered for continuous operation
- Rated within the motor manufacturer’s recommended working limits
- Can be operated continuously without damage
- Corrosion resistant electro-coat paint is baked on
- Diaphragm retains water in the casing to ensure the mechanical seal can never run dry
- Excellent air handling ability - after initial priming the pump has the ability to re-prime itself
- Built-in overload with automatic reset
- Stainless steel shaft
- Clockwise rotation when viewed from motor end
- Pressure switch AS4 preset at 30-50 psi
Applications
- Homes
- Farms
- Cottages
- Booster service
Belt Driven Jet Pumps Models J5BD J7BD J10BD J15BD HSJ20BDD BJBD R1.pdf
J5 J7 J10 and J15 Convertible Jet Pumps 1/2, 3/4, 1 and 1-1/2 HP 60 Hz (BJ+R4).pdf
Water Products Technical Data and Pump Fundamentals TTECHWP R6 .pdf
Motor Application and Installation Data Manual BMAID R16 .pdf
Jet Pumps IM102R11 .pdf
Submersible Jet Pumps Service Manual GSSERVICE R9 .pdf
Jet Pump Repair Parts RJETPARTS R8.pdf
J and JS Repair Parts RJ-JS R3.pdf
Jet and Submersible Product Catalog JETSUB.pdf
Brand | Goulds |
Mfg. Number | J5 |
Series | J+ |
Product Type | Convertible jet pump |
Application | Shallow or deep well |
Horsepower | 1/2 HP |
Voltage | 115/230 Volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 3500 rpm |
Suction Connection | 1-1/4" NPT |
Discharge Connection | 1" NPT |
Drive (Pressure) Connection | 1" NPT |
Impeller Material | Glass filled noryl |
Thermal Protection | Yes |
Maximum Temperature | 140°F |
The Goulds J+ Convertible Jet Pump series can be used for either shallow or deep well applications (with appropriate Goulds fittings) in homes, farms, cottages and various booster service systems. New deep well applications require a separate jet assembly package (twin pipe or Packer style). A key feature of the Goulds J+ Convertible Jet Pump is the air handling ability, meaning the pump can automatically re-prime itself after the initial prime, even when air gets into the system. Pumping will simply resume as soon as the water level rises above the foot valve. In addition, the pump is powered for continuous operation within the motor limits, corrosion resistant (with baked on electro-coat paint) and easy to service, featuring a nozzle clean-out plug and back pull-out design. The two component motor compartment allows for easy access to the wiring and replaceable components. Each pump is rated for continuous duty. The protected mechanical seal is a of a special diaphragm design that retains water in the casing at all times to ensure that the mechanical seal will never be run dry. The impeller is FDA compliant, corrosion and abrasion resistant glass filled Noryl, while the tubings and fittings are FDA compliant engineered plastic that is corrosion and UV resistant. The bolt down diffuser provides positive alignment with the impeller and includes a stainless steel wear ring, as well as FDA compliant, injection molded, glass filled Lexan for extended performance in abrasive conditions. The basic pump units below are configured for shallow wells by default. The basic unit includes the pump and motor, pressure gauge and bushing and a pressure switch with tubings and fittings (a deep well set up requires a JDW fittings package or an AV22 kit.). Additional fittings and a 24" tubing to connect to a pressure control valve are included. Additional components may be required. A shallow well package includes a shallow well adapter, nozze, venturi (diffuser), gasket, bolts and pipe plugs. A twin pipe deep well package includes the jet body, nozzle, venturi (diffuser) and foot valve. The deep well Packer package includes the packer body, nozzle, venturi (diffuser) and a built-in check valve. The Packer system also requires a packer adapter on the wellhead. Please note that deep well systems require a pressure control valve. All systems require a pressure tank (sold separately).
GOULDS J+ CONVERTIBLE JET PUMP |
Model Comparison Chart
Model | Suction | Discharge | HP | Voltage | Phase | Shallow Well GPM | Twin Pipe GPM | Packer GPM |
J5 | 1-1/4" NPT | 1" NPT | 1/2 | 115/230 | 1 | 16.5 @ 5' (30 PSI) | 13.0 @ 30' (30 PSI) | 11.9 @ 30' (30 PSI) |
J7 | 1-1/4" NPT | 1" NPT | 3/4 | 115/230 | 1 | 11.3 @ 5' (30 PSI) | 15.8 @ 30' (30 PSI) | 13.8 @ 30' (30 PSI) |
J10 | 1-1/14" NPT | 1" NPT | 1 | 115/230 | 1 | 24.8 @ 5' (30 PSI) | 17.0 @ 30' (31 PSI) | 16.7 @ 30' (35 PSI) |
J15 | 1-1/14" NPT | 1" NPT | 1-1/2 | 115/230 | 1 | 26.6 @ 5' (30 PSI) | 21.2 @ 30' (35 PSI) | 24.4 @ 30' (34 PSI) |
PERFORMANCE RATINGS |
COMPONENTS |
INSTALLATION |
RECOMMENDED DEEP WELL SETTINGS |
DIMENSIONS AND WEIGHTS |
REPAIR PARTS |
BROCHURE |
Goulds J+ Convertible Jet Pump Brochure |
TECHNICAL BROCHURE |
Goulds J+ Convertible Jet Pump Brochure |
INSTALLATION MANUAL |
Goulds J+ Convertible Jet Pump Installation Manual |
REPAIR PARTS |
Goulds J+ Convertible Jet Pump Repair Parts |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*