Liberty 230, 45 GPM, 1/3 HP Manual Aluminum Submersible Sump Pump, 115v, 1 Phase, 10 ft Cord
FEATURES
Liberty Pumps 230
The Liberty 230 Submersible Sump Pump Series features Deep Finned Powder Coated Aluminum Motor Housing. It provides 225% more cooling capacity than cast iron housings. Its efficient motor design reduces electrical usage by up to 40%. This manual pump may be operated by directly plugging into an approved electrical outlet. To prevent excessive seal wear and overheating, it is recommended that pumps not be run dry for extended periods of time.
Features:
- Vortex style impeller permits passage of solids without clogging
- Made of high temp engineered thermoplastic
- Polypropylene and powder coated aluminum construction
- Stainless steel rotor shaft
- All fasteners are made of non-corrosive stainless steel
- Oil-filled, hermetically sealed motors with thermal overload protection
- Permanently lubricated upper and lower bearings
- Removable base allows suction down to 1/8"
Liberty Pumps 3 Year Warranty.pdf
Installation Manuals 230 Series.pdf
Liberty_Sump Pumps_230 Series_Repair Parts.pdf
Liberty_Sump Pumps_230 Series_Repair Parts.pdf
Liberty_Sump Pumps_230 Series_Repair Parts.pdf
Liberty_Sump Pumps_230 Series_Repair Parts.pdf
Liberty_Sump Pumps_230 Series_Repair Parts.pdf
The Liberty 230 series sump pumps are rugged pumps designed for domestic groundwater applications.
These Liberty 230 pumps are constructed with a solid polypropylene and powder coated aluminum construction casing. The rotor shaft and fasteners are non-corrosive stainless steel. The upper and lower bearings are permanently lubricated, while the powerful oil-filled hermetically sealed motor comes with thermal overload protection.
A high temperature engineered thermoplastic vortex style impeller allows each pump to pass water with up to ⅜” solids. The pumps listed below are light (11 lbs.) and compact (height 10.5" x 9.6" major width). A removable base allows suction all the way down to ⅛”. The main difference among models is the type of float; please note that the Liberty 237 requires a minimum sump diameter of 14". All models include a standard 10 ft. quick disconnect power cord that can easily be replaced without breaking the seals to the motor.
Liberty 230 Series Sump Pump |
Model Comparison Chart
Model | Discharge | HP | Volt. | Phase | GPM | Head | Type | Switch |
230 | 1.5" | 1/3 | 1/3 | 1 | 45 | 21' | Non | N/A |
231 | 1.5" | 1/3 | 1/3 | 1 | 45 | 21' | Auto | Wide Angle |
233 | 1.5" | 1/3 | 1/3 | 1 | 45 | 21' | Auto | W.A. Piggyback |
237 | 1.5" | 1/3 | 1/3 | 1 | 45 | 21' | Auto | Magnetic Vert. |
Performance Curve |
BROCHURES |
Liberty 230 Series Brochure |
MANUAL |
Liberty 230 Series Instructions Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*