Zoeller 137-0050, Model G137, Series 130, Sump & Effluent Pump, 1/2 HP, 460 Volts, 3 Phase, Manual, Cast Iron, 1-1/2 Inch Discharge, 15 Ft. Cord
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller "Flow-Mate" Effluent Pump
This submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. These durable cast iron pumps are used for septic tank, low pressure pipe (LPP) and enhanced flow STEP systems. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
- Durable, cast iron construction - switch case motor and pump housing, base and impeller
- All cast iron ASTM class 25, 2500# tensile strength
- Corrosion-resistant, powder coated epoxy finish
- No sheet metal parts to rust or corrode
- Upper and lower sleeve bearings running in bath of oil
- Carbon and ceramic shaft seal
- Stainless steel screws, bolts, guard, handle, arm and seal assembly
- Maximum temperature for effluent or dewatering: 130°F (54°C) (extra duty: 140°F / 60°C)
- Passes 5/8" (16 mm) spherical solids
- No screens to clog
- On point: 10" (25.4 cm)
- Off point: 2-3/4" (7 cm)
- Simplex and duplex package systems available
- Variable level control systems available, designed for heavy-duty effluent applications
- Pumps must be operated in upright position
- For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Control Panel Options
Below are the control panels that can be used with this pump:
Note: Image is illustrative and may not reflect details of actual product.
Parts List, Model 137 (M, D, N, E) 60 Hz.pdf
Parts List, Models 137 (H,I,J,F,G) 60 Hz.pdf
Installation Instructions, Three-Year Warranty 60 Hz.pdf
Parts List, Model 139 (M, D, N, E) 60 Hz.pdf
Zoeller_Effluent_Septic_Pumps_130_Series_Repair_Parts.pdf
Installation Instructions, Three-Year Warranty 60 Hz.pdf
The Zoeller 130 series effluent/sump pumps are designed for effluent, groundwater and dewatering applications. These pumps are designed to be used in a septic tank, low pressure pipe (LPP) and enhanced flow step systems settings.
These pumps are ruggedly constructed. The Zoeller 137 models are all cast iron ASTM class 25, 25000# tensile strength, while all Zoeller 139 models are bronze. Both sub-types are adorned with a powder coated epoxy finish to prevent corrosion as well as a switch case made of durable, cast iron construction. The impeller is a non-clog vortex. Each pump can pass water with ⅝” solids. The maximum temperature for a standard duty effluent or dewatering applications is 130°F while the temperature for extra duty is 140°F.
The upper and lower sleeve bearing run in a bath of oil, the seal is carbon and ceramic, and the bolts, screws, handle, guard, arm and seals are all stainless steel. There are no sheet metal parts to rust or corrode in the pump. The motor is 60 Hz, 1725 oil-filled and hermetically-sealed with automatic reset thermal overload protection.
All pumps listed below operate in single phase power.
Zoeller 130 Series Effluent Pump |
Zoeller 139-0003
Model Comparison Chart
Model | Discharge | HP | Volt. | GPM | Head | Type | Cord | Float |
137-0002 | 1.5" NPT | 1/2 | 115 | 93 | 26' | Manual | 15' | N/A |
137-0045 | 1.5" NPT | 1/2 | 115 | 93 | 26' | Auto | 10' | Variable |
137-0001 | 1.5" NPT | 1/2 | 115 | 93 | 26' | Auto | 10' | Vert. |
137-0005 | 1.5" NPT | 1/2 | 115 | 93 | 26' | Auto | 10' | Vert. |
137-0004 | 1.5" NPT | 1/2 | 230 | 93 | 26' | Manual | 15' | N/A |
137-0068 | 1.5" NPT | 1/2 | 230 | 93 | 26' | Auto | 10' | Variable |
137-0003 | 1.5" NPT | 1/2 | 230 | 93 | 26' | Auto | 10' | Variable |
137-0079 | 1.5" NPT | 1/2 | 115 | 93 | 26' | Auto | 10' | Variable |
137-0036 | 1.5" NPT | 1/2 | 460 | 93 | 26' | Manual | 15' | N/A |
137-0050 | 1.5" NPT | 1/2 | 460 | 93 | 26' | Manual | 15' | N/A |
139-0001 | 1.5" NPT | 1/2 | 115 | 93 | 26' | Auto | 10' | Vert. |
139-0002 | 1.5" NPT | 1/2 | 115 | 93 | 26' | Manual | 15' | N/A |
139-0003 | 1.5" NPT | 1/2 | 230 | 93 | 26' | Auto | 10' | Vert. |
139-0004 | 1.5" NPT | 1/2 | 230 | 93 | 26' | Manual | 15' | N/A |
Performance Curve |
Dimensions |
BROCHURES |
Zoeller 130 Series Brochure |
INSTRUCTIONS |
Zoeller 130 Series Installation Instructions |
SPECIFICATIONS |
Zoeller 130 Series Specifications Sheet |
REPAIR PARTS |
Zoeller 130 Repair Parts List |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*