Baldor CJWDM3463, 56J Jet Pump Motor, 3/4 HP, 208-230/460 Volts, 1.4 Amps, 3 Phase, 3450 RPM, 60 Hz, TEFC Enclosure, 56J Frame, C-Face, 3514M Motor Type, Steel Frame
SKU #: CJWDM3463
Brand: Baldor
Available For Order! (Ships in 1-2 Days)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Baldor 56J Jet Pump Motor
The Industrial pumping applications in wet or humid environments, especially in food and beverage processing facilities in which equipment is cleaned on a regular basis.
Features
- Contact lip seal and v-ring slinger on drive end to protect from moisture and contaminants
- White epoxy finish coat
- Sealed for life ball bearings
- 300 series stainless steel threaded shaft with opposite drive end screwdriver slot for ease of mounting to pump assembly
- Stainless steel hardware & nameplate
- Neoprene gaskets with lipped-lid conduit box
- Rotor coated with epoxy primer for corrosion resistance
Applications
- Pumps
Note: Picture is illustrative and may not reflect the actual product
Brand | Baldor |
Mfg. Number | CJWDM3463 |
Product Type | 56J Jet Pump Motor |
Horsepower | 3/4 HP |
Voltage | 208-230/460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Synchronous Speed | 3600 RPM |
Speed | 3450 RPM |
Speed Code | Single Speed |
High Voltage Full Load Amps | 1.4 Amps |
Enclosure | TEFC |
Frame Size | 56J |
Motor Type | 3514M |
Motor Standards | NEMA |
Number of Poles | 2 |
Pulley Face Code | C-Face |
Frame Material | Steel |
Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
Overall Length | 12.72 in |
Service Factor | 1.5 |
Efficiency @ 100% Load | 68.00% |
Duty Rating | CONT |
Inverter Code | Inverter ready |
Auxillary Box | No Auxillary Box |
Base Indicator | Rigid |
Bearing Grease Type | POLYREX EM (-20F +300F) |
Current | 3.0 A @ 208 V 3.8 A @ 208 V 2.8 A @ 230 V 1.4 A @ 460 V |
Design Code | B |
Drip Cover | No Drip Cover |
Heater Indicator | No heater |
KVA Code | L |
Motor Lead Exit | KO Box |
Motor Lead Termination | Flying Leads |
Rodent Screen | No |
Shaft Diameter | 0.625 in |
Insulation Class | F |
Power Factor | 74 |
Pulley End Bearing Type | Sealed |
Shaft Extension Location | Pulley End |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | Shaft Slinger |
Starting Method | Direct on line |
Vibration Sensor Indicator | No Vibration Sensor |
Thermal Device - Bearing | No |
Thermal Device - Winding | No |
Ambient Temperature | 40 °C |
Agency Approvals | CSA, UR |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*