A.Y. McDonald 6195-003, Model 325075SL, Air Powered Pump-SludgeMaster, 3" NPT Discharge, Aluminum

FEATURES

A.Y. McDonald Air Powered Pump-Sludgemaster

The SludgeMaster air powered pump is to be used for immediate use: simply hook up compressed air supply, lower through manhole or into sump or fluid to be pumped. No fuel tanks to run empty, no gas cans to carry, no electrical connections, no electric motors to overload. High capacity, low head operation to meet nearly every emergency or daily-use application. Keeps pumping without clogging on most problem jobs. Won’t choke up on small trash. Can run dry with no damage. Self-draining to prevent damage in below freezing weather. Sturdily built for rough handling and long-life endurance on land, at sea or offshore: cast iron & steel for wear, aluminum for weight-saving. 

-To accurately determine air consumption, please refer to the attached brochure to review curve. 

-Use a compressed air pressure supply between 60-100 psi for the best performance of the pump. 

• For a 60 PSI Air Pressure: 45 ft Max Head with 230 GPM Max
• For a 80 PSI Air Pressure:  55 ft. Max Head with 280 GPM Max
• For a 100 PSI Air Pressure:  66 ft Max Head with 310 GPM Max

Features

• Powered by a compressed air powered motor with easily adjusted variable flow and pressure control
• Up to 65’ shut-off head
• Self-priming
• Submersible when exhaust air is piped above surface
• No suction hose needed
• Weighs just 59 Ibs
• Only 23” high
• Air inlet 1/2” NPT
• Fits through openings as small as 14” diameter
• Fool-proof design: open two-vane low-speed trash-type cast iron impeller handles abrasive substances with less wear
• Continuous automatic lubrication: internal oiler, oil-bath lubricated shaft seal; needs only 1 pint every 50 hours of use
• Built-in speed-limiting governor prevents damage to pump if run dry for extended periods of time

Applications

• Mud
• Leaves
• Twigs
• Sand
• Sludge
• Mill-scale
• Bilge-gunk
• Sewage
• Small solids
• Trash-laden water typically confronted by utility companies, contractors, municipalities, and most industries
• Most substances common to the chemical process, marine, mining, paper pulp and petrochemical industries