AMT 1SP07C-3P, Self-Priming Chemical Pump, 3/4 HP, 1" NPT (Suction and Discharge), 130 GPM, Cast Iron, Ethylene Propylene Diene Monomer/Ethylene propylene rubber Shaft Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
AMT 1" and 2" Cast Iron Chemical
This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water drainage and chemical processing. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solid and EPDM/EPR seals for liquid chemical transfer with specific gravities up to 1.3. (Verify chemical capability with liquids) Built-in check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Pumps feature Dual cycle 50/60 Hz TEFC motors.
Features
- Cast Iron Construction with EPDM/EPR Seals
- Easy Cleanout Pull From Rear Design
- 1" to 2" NPT Port Sizes
- Maximum Temperature 180° F
- Maximum Flow 130 GPM
- Maximum Head 100 Ft. (43 PSI)
- Self-Priming up to 20 Feet with Built-in Check Valve
- Self-Cleaning, Clog Resistant Impeller
- 1/2 to 3 HP 56J Dual Cycle 50/60 Hz Single or Three Phase TEFC Motors
- Motors Feature 303 Stainless Steel Shaft
Description | Self-Priming Chemical Pump, 3/4 HP, 1" NPT (Suction and Discharge), 130 GPM, Cast Iron, Ethylene Propylene Diene Monomer/Ethylene propylene rubber Shaft Seal |
Brand | AMT |
Mfg. Number | 1SP07C-3P |
Series | 1" and 2" Cast Iron Chemical |
Product Type | Self-Priming Electric Pumps |
Application | Waste Water Drainage and Chemical |
Horsepower | 3/4 HP |
Phase | 3 Phase |
Enclosure Type | TEFC |
Frame Size | 56J |
Voltage | 208-230/460 Volts |
Frequency | 60 Hz |
RPM | 3450 RPM |
Casing Material | Cast Iron |
Shaft Seal Material | Ethylene Propylene Diene Monomer/Ethylene propylene rubber |
Full Load Amps | 3/2 Amps |
Suction Ports Size | 1" NPT |
Discharge Ports Size | 1" NPT |
Length | 18.0" |
Width | 9.3" |
Height | 9.3" |
Max. Flow rate | 130 GPM |
Max. Head | 100 Ft. |
Self -primes | 20 Ft. |
Max. Temperature | 180°F |
Max. Working Pressure | 125 PSI |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*