AMT 379C-95, Self-Priming Sprinkler/Booster Pump, 2 HP, 1-1/2" NPT (Suction and Discharge), 157 GPM, Cast Iron, Buna-N Shaft Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
AMT 1-1/2″ and 2″ Sprinkler Booster
AMT Sprinkler/Booster pumps feature 300 Series Investment cast stainless steel closed impellers for high efficiency and resistance against erosion caused by abrasive particles. All models self-prime to 20 feet. Single stage models feature dual volute design to reduce radial load on motor and a built-in check valve to ensure fast priming after initial liquid is added to the pump. Cast iron construction provides durability and low maintenance. Easy cleanout design includes replaceable dual volute/diffuser and casing o ring for servicing. Twostage models provide additional pressure in fractional horsepower sizes for multi-sprinkler head applications. Type 21 mechanical seals handle maximum working pressure to 150 PSI. Pumps are available from 3/4 to 7-1/2 HP with Open Drip Proof (ODP) or Totally Enclosed Fan Cooled (TEFC) motors.
Features
- Cast Iron Construction with 300 Series Investment Cast Stainless Steel Impellers
- Buna-N Mechanical Seal and O-Ring
- Optional Viton Seal, Check Valve and O-Ring Available on Single Stage Models
- 1-1/2" or 2" NPT Ports Sizes
- Maximum Temperature 180° F
- Maximum Flow 157 GPM
- Maximum Head 180 Ft.
- Self-Priming to 20 Ft.
- Single Stage (379/365 Series) Two Stage (478 Series) Construction
- Single Stage Models Feature Removable Dual Volute Design
- Available with 3/4 to 7-1/2 HP Single or Three Phase Motors
Description | Self-Priming Sprinkler/Booster Pump, 2 HP, 1-1/2" NPT (Suction and Discharge), 157 GPM, Cast Iron, Buna-N Shaft Seal |
Brand | AMT |
Mfg. Number | 379C-95 |
Series | 1-1/2" and 2" Sprinkler Booster |
Product Type | Self-Priming Electric Pumps |
Application | Multi-Sprinkler Head |
Horsepower | 2 HP |
Phase | 1 Phase |
Enclosure Type | TEFC |
Frame Size | 56J |
Voltage | 115/230 Volts |
Frequency | 60 Hz |
RPM | 3450 RPM |
Casing Material | Cast Iron |
Shaft Seal Material | Buna-N |
Full Load Amps | 22/11 Amps |
Suction Ports Size | 1-1/2" NPT |
Discharge Ports Size | 1-1/2" NPT |
Length | 19.8" |
Width | 9.3" |
Height | 9.1" |
Max. Flow rate | 157 GPM |
Max. Head | 180 Ft. |
Self -primes | 20 Ft. |
Max. Temperature | 180°F |
Max. Working Pressure | 150 PSI |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*