AMT 07ES05C-1P, Centrifugal Chemical Pump, 1/2 HP, 3/4" NPT (Suction and Discharge), 180 GPM, Single Phase, 115-208/230 Volts, Cast Iron, Ethylene Propylene Diene Monomer/Ethylene Propylene Rubber Shaft Seal
SKU #: 07ES05C-1P
Brand: AMT
Available For Order! (Ships Direct From Manufacturer)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
AMT- Centrifugal Chemical Pumps
AMT Solids Handling Centrifugal pumps are designed for continuous-duty OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impellers to prevent clogging and handles solids up to 3/8" diameter depending on the model. Pumps are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. Pumps are not self-priming and require flooded suction.
Features:
- EPDM/EPR Mechanical Seal and O-Rings
- Discharge Port Rotates in 45° Increments
- Solids Handling, Clog Resistant Impeller
- 1/2 to 3 HP Dual Cycle 50/60 Hz TEFC 56J NEMA Single or Three Phase Motors
- 3/4" to 2" NPT Sizes
- Maximum Working Pressure 125 PSI
- Maximum Flow 180 GPM
- Maximum Head 95 Ft. (41 PSI)
- Pull-From-Rear Design Permits Easy Servicing Without Disturbing Piping
- Multiple 1/2" NPT Drain Ports
Description | Centrifugal Chemical Pump, 1/2 HP, 3/4" NPT (Suction and Discharge), 180 GPM, Cast Iron, Ethylene Propylene Diene Monomer/Ethylene Propylene Rubber Shaft Seal |
Brand | AMT |
Mfg. Number | 07ES05C-1P |
Series | Centrifugal Chemical Pumps |
Product Type | Straight Centrifugal Pump |
Application | Industrial & Commercial Pumps |
Horsepower | 1/2 HP |
Phase | 1 Phase |
Voltage | 115-208/230 Volts |
Frequency | 60 Hz |
Enclosure Type | TEFC |
Suction Port Size | 3/4" NPT |
Discharge Port Size | 3/4" NPT |
Material | Cast Iron |
Shaft Seal Material | Ethylene Propylene Diene Monomer/Ethylene Propylene Rubber |
Max. Working Pressure | 125 PSI |
Max. Temperature | 180°F |
Max. Head | 95 Ft. |
Max. Solids Diameter | 3/8" |
Max. Flow rate | 180 GPM |
Frame Size | 56J |
Full Load Amps | 9/5 Amps |
Length | 13.9" |
Width | 10.1" |
Height | 9.9" |
RPM | 3450 RPM |
Discharge Rotates Angle | 45° |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*