AMT 12DC-95, 12 Volt DC Washdown Pump, 7/8 HP, 1-1/4" NPT Suction, 1" NPT Discharge, 52 GPM, Cast Iron, Buna-N Shaft Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
AMT-12 Volt DC High Head Washdown
AMT 12 Volt DC Washdown pumps are designed for OEM, septic service, pumper and marine applications requiring a DC motor. The motor has a one hour duty rating and is furnished with a stainless steel shaft. This washdown duty pump is available in a variety of construction and seal materials to meet your specifications. Pull-from-rear design for easy servicing without disturbing any piping. High efficiency impeller maximizes performance. Pumps are not self-priming and require flooded suction. Premium 12 Volt DC washdown duty motors are built to handle high pressure washdown and damp/wet environments. The motor features epoxy paint, condensate drains, interior coating to protect against moisture or corrosion, special shaft seals to retard water, 12 Volt DC stud connections with o-ring seals, oversized brushes assuring longer brush life and base mount. Units are not submersible in liquids.
Features:
- 300 Series Investment Cast Stainless Steel and Cast Iron with Stainless Steel Impeller Construction
- Viton Mechanical Seal and O-Ring with Stainless Steel Models
- Buna-N Mechanical Seal and O-Ring with Cast Iron Models
- Discharge Port Rotates in 90° Increments
- (4) Front Drain Plugs
- Maximum Flow 56 GPM
- Maximum Head 80 Ft. (35 PSI)
- High Efficiency Closed Impeller
- 7/8 HP 12 Volt DC Premium Washdown Duty Motor forSevere and Damp/Wet Operating Conditions
Description | 12 Volt DC Washdown Pump, 7/8 HP, 1-1/4" NPT Suction, 1" NPT Discharge, 52 GPM, Cast Iron, Buna-N Shaft Seal |
Brand | AMT |
Mfg. Number | 12DC-95 |
Series | 12 Volt DC High Head Washdown |
Product Type | Straight Centrifugal Pump |
Application | Industrial & Commercial Pumps |
Horsepower | 7/8 HP |
Voltage | 12 Volts DC |
Frequency | 60 Hz |
Suction Port Size | 1-1/4" NPT |
Discharge Port Size | 1" NPT |
Casing Material | Cast Iron |
Shaft Seal Material | Buna-N |
Impeller Material | Stainless Steel |
Max. Working Pressure | 150 PSI |
Max. Temperature | 180°F |
Max. Head | 74 Ft. |
Max. Solids Diameter | 3/16" |
Max. Flow rate | 52 GPM |
Length | 15.5" |
Width | 7.9" |
Height | 8.5" |
RPM | 3500 RPM |
Discharge Rotates Angle | 90° |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*