Bell & Gossett 1EF029LF, Be611S, e-60 Series, In-Line Centrifugal Pump, 3/4 HP, 115/230 Volts, 1 Phase, (2" x 2" x 5.25") Size, 152 GPM Max, 24 ft Max Head, 4.750 Impeller, Bronze Volute
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Bell & Gossett e-60 In-Line Mounted Centrifugal Pump
The series e-60 is a three-piece in-line centrifugal pump designed for heating and cooling, potable water, and other fluid transfer applications in the residential and commercial markets.
Features
- Permanently lubricated pump and motor bearings—no regreasing needed
- Class-leading hydraulic efficiency
- Upgraded unitized mechanical seal
- Dimensional interchangeability with legacy Series 60
- Space saving in-line mounting
- Easy serviceability—motor, coupler, seal and impeller can all be repaired or replaced without removing the pump from its piping
- Quiet operation
- Robust mechanical seal
- Suction and discharge companion flanges included
- 3 year warranty
Frequency | Bell & Gossett |
Speed | 1EF029LF |
Current | Be611S |
Enclosure | e-60 |
Frame Size | Circulator |
Motor Orientation | Hydronic systems |
Number of Poles | 3/4 HP |
Mounting Type | 115/230 Volts |
Frame Material | 1 |
Overall Length | 60 Hz |
Service Factor | 1750 RPM |
Efficiency @ 100% Load | Open Drip Proof |
Duty Rating | 2" x 2" x 5.25" |
Overload Protector | 152 GPM |
Electrical Type | 24 ft |
Starting Method | 4.75 |
Design Code | ASTM B584 |
KVA Code | Cast bronze |
Frame Length | Steel |
Shaft Diameter | EPR/Carbon/Silicon-Carbide |
Insulation Class | Flanged |
Opp Drive End Bearing | 175 psi (12 bar) |
Drive End Bearing | 250°F |
Shaft Extension Location | 3 years |
The Bell & Gossett Series e-60 is a three-piece centrifugal in-line circulator pump designed for HVAC, potable water, and other clean water applications in the residential and commercial markets. Series e-60 offers great value with class-leading hydraulic efficiency, long pump life, and easy serviceability. Quiet operation, a robust mechanical seal, and maintenance-free bearings make Series e-60 a truly worry-free, install-and-forget solution. Features and Benefits
- Class-leading hydraulic efficiency
- Upgraded unitized mechanical seal
- Permanently lubricated pump and motor bearings—no regreasing!
- Space saving in-line mounting
- Dimensionally interchangeable with legacy Series 60
- Bronze-Fitted or all Bronze
- 1” to 3” pipe sizes
- 0.25 – 3 HP motors at 1750 RPM
BELL & GOSSETT e-60 SERIES CIRCULATOR PUMPS |
Bell & Gossett e-60 Series Circulator Pumps
Model Comparison Chart
Model | Impeller Diameter | HP | Voltage | Phase | GPM | Max. Head |
e606S | 5.25" | 1/2 | 115/230 | 1 | 87 | 28' |
Be601S | 4.37" | 1/4 | 115/230 | 1 | 48 | 18' |
Be601T | 4.37" | 1/4 | 208-230/460 | 3 | 48 | 18' |
Be602S | 4.84" | 1/3 | 115/230 | 1 | 55 | 24' |
Be604S | 4.37" | 1/4 | 115/230 | 1 | 68 | 19' |
Be602T | 4.84" | 1/3 | 208-230/460 | 3 | 55 | 24' |
Be605S | 4.84" | 1/3 | 115/230 | 1 | 75 | 24' |
Be604T | 4.37" | 1/4 | 208-230/460 | 3 | 68 | 19' |
Be603T | 5.25" | 1/2 | 208-230/460 | 3 | 60 | 28' |
Be605T | 4.84" | 1/3 | 208-230/460 | 3 | 75 | 24' |
Be603S | 5.25" | 1/2 | 115/230 | 1 | 60 | 28' |
Be607S | 4.37" | 1/3 | 115/230 | 1 | 85 | 18' |
e652S-ECM BF | 5" | 1/2 | 230 | 1 | 60 | 25' |
e650S-ECM BF | 5" | 1/2 | 115 | 1 | 60 | 25' |
e653S-ECM BF | 5" | 1/2 | 230 | 1 | 80 | 26' |
e651S-ECM BF | 5" | 1/2 | 115 | 1 | 80 | 26' |
Be606S | 5.25" | 1/2 | 115/230 | 1 | 87 | 28' |
Be606T | 5.25" | 1/2 | 208-230/460 | 3 | 87 | 28' |
Be607T | 4.37" | 1/3 | 208-230/460 | 3 | 85 | 18' |
Be608T | 4.93" | 1/2 | 208-230/460 | 3 | 97 | 25' |
Be608S | 4.93" | 1/2 | 115/230 | 1 | 97 | 25' |
Be610T | 4.12" | 1/2 | 208-230/460 | 3 | 125 | 18' |
e656S-ECM BF | 4.68" | 1 | 230 | 1 | 230 | 18' |
Be610S | 4.12" | 1/2 | 115/230 | 1 | 125 | 18' |
Be611T | 4.75" | 3/4 | 208-230/460 | 3 | 152 | 24' |
Be609T | 5.25" | 3/4 | 208-230/460 | 3 | 108 | 28' |
Be609S | 5.25" | 3/4 | 115/230 | 1 | 108 | 28' |
Be611S | 4.75" | 3/4 | 115/230 | 1 | 152 | 24' |
Be626T | 4.37" | 3/4 | 208-230/460 | 3 | 170 | 20' |
Be621T | 4.87" | 1/2 | 208-230/460 | 3 | 95 | 24' |
Be626S | 4.37" | 3/4 | 115/230 | 1 | 170 | 20' |
Be621S | 4.87" | 1/2 | 115/230 | 1 | 95 | 24' |
Be612T | 5.25" | 1 | 208-230/460 | 3 | 170 | 30' |
Be615T | 5.62" | 3/4 | 208-230/460 | 3 | 142 | 32' |
e655S-ECM BF | 5" | 1 | 230 | 1 | 180 | 27' |
e654S-ECM BF | 5.25" | 1 | 230 | 1 | 110 | 28' |
Be615S | 5.62" | 3/4 | 115/230 | 1 | 142 | 32' |
Be652S-ECM AB | 5" | 1/2 | 230 | 1 | 60 | 25' |
Be650S-ECM AB | 5" | 1/2 | 115 | 1 | 60 | 25' |
Be614T | 6.25" | 1 | 208-230/460 | 3 | 127 | 41' |
Be653S-ECM AB | 5" | 1/2 | 230 | 1 | 80 | 26' |
Be651S-ECM AB | 5" | 1/2 | 115 | 1 | 80 | 26' |
Be627T | 5.25" | 1-1/2 | 208-230/460 | 3 | 202 | 31' |
Be612S | 5.25" | 1 | 115/230 | 1 | 170 | 30' |
Be614S | 6.25" | 1 | 115/230 | 1 | 127 | 41' |
Be627S | 5.25" | 1-1/2 | 115/230 | 1 | 202 | 31' |
Be656S-ECM AB | 4.68" | 1 | 230 | 1 |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An OrderInspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.* |