A Trusted Name Since 1986

Product Experts Available
CALL US: 1-800-429-0800

Berkeley

Berkeley Pumps @ The Guaranteed Lowest Price ! Pump Products is a stocking Berkeley Pump Distributor, offering the lowest prices on all Berkeley Pumps For Sale. We sell Berkeley Pumps Direct to the Consumer, Contractor and Industrial market, so you pay less for all of your Berkeley Pump Products.                                   { BUY PUMP PARTS FOR EVERY BERKELY PUMP MADE ! }

QUESTIONS ? For help selecting and sizing the right pump or replacement parts talk directly with our Berkeley Pump Customer Support Team at 1-800-429-0800 

 

Berkeley Pump Distributors Catalog of Pumps & Parts for Sale !

Berkeley pumps are recognized for delivering years of trouble free, efficient operation in the most challenging water transfer projects and residential water applications and Pump Products proudly offers one of the most comprehensive Berkeley product selections on the market today. In addition to a large inventory of Berkeley pump motors, pressure tanks and accessories, we have a wide variety of

  • Berkeley Booster Pumps
  • Centrifugal Pumps
  • Dewatering Pumps
  • Lawn Sprinkler Pumps
  • Sewage Pumps
  • Trash Pumps

Our extensive selection of Berkeley Well Pumps includes

  • Deep Well Jet Pumps
  • Horizontal Multi Stage Jet Pumps
  • ProJet Jet/Tank Systems
  • Vertical Multistage Jet Pumps
  • Submersible Well Pumps in sizes ranging from 4" to 10"

For residential and light commercial applications with water sources located less than 25 feet down, we carry Berkeley's popular HN Series Jet pumps. For deep well applications (25+ feet down) we offer

  • Berkeley LT2 Convertible Pumps
  • Berkeley's HN Series Shallow Well Pumps
  • LT2 Series Convertible Jet pumps
  • LTHH Self-Priming Centrifugal Booster pumps

For applications ranging from golf course irrigation to domestic water pressure boosting, Berkeley pumps are the clear choice. Make Pump Products your one-stop shop for these and other Berkeley best-sellers.

 

----------------------------------------------------------------------------------------------------------------------------------------

 

 

High Flow / High Efficiency Centrifugal Irrigation Pumps

High Flow / High Efficiency Centrifugal Irrigation Pumps are designed for clean water applications such as flood irrigation, water features, and pivot irrigation.  Available in Frame Mount, SAE, and Close Coupled Electric Drive configurations.

Key Features
  • Broad flow range to 7,500 GPM
  • Industry leading 85% hydraulic efficiencies
  • Suction splitter for stable inflows
  • 20,000 Hour bearing life
  • Double volute
Warranty

1-year limited warranty

Sell Sheet: High Flow / High Efficiency Centrifugal Irrigation
Sell Sheet: High Flow / High Efficiency Centrifugal Irrigation
Performance Curves: High Flow / High Efficiency

B8J_BH 8X10X13.5B6Z_BHH 6X8X9.5B10J_BH 10X12X13.5B4Z_BH 4X5X9.5B5Z_BH 5X6X9.5

Dimensions: B Series Centrifugals
DOWNLOAD DRAWING

----------------------------------------------------------------------------------------------------------------------------------------

 

 
 

S.A.E. Centrifugal Series

The new standard in full-performance reliability... BERKELEY® S.A.E. End Suction Pumps are suitable for any application requiring the convenience of an internal combustion engine as a power source. State-of-the-art design delivers 20,000 hours of bearing life, one of the industry's longest life cycles.

Key Features
  • Twenty-eight pump models, with flows to 6500 GPM, Pressures to 500 feet (215 psig).
  • Cast Iron or Silicon Bronze Impellers are available in either packed or mechanical seal configurations. Replaceable stainless steel shaft sleeve is standard, providing maximum corrosion resistance while minimizing shaft wear.
  • Volute case - Back pull-out design allows easy removal and repair without disturbing piping connections, and completely exposes the impeller for flushing or service.
  • Heavy-Duty Power Frame is designed for durability delivering in excess of 20,000 hours of bearing life. Includes large shaft and grease-for-life sealed bearings to handle the toughest conditions with less maintenance and more reliability.
  • Dry-Run Seal option available

Be sure to download the Information sheet (in Resources below) to select the proper engine coupler and housing

Warranty

12 months from date of original installation, or, 24 months from date of manufacture

Owner's Manual: B6XT

DOWNLOAD MANUAL

Dimensions: B Series Centrifugals

DOWNLOAD DRAWING

Downloadable Image Archive: SAE Centrifugals

DOWNLOAD ARCHIVE

Sell Sheet: B6XT

DOWNLOAD SHEET

Information: Selecting SAE Housing & Coupling

DOWNLOAD INFO

Instructions: Shaft Replacement Kit for SAE & Frame Mount

DOWNLOAD INSTRUCTIONS

----------------------------------------------------------------------------------------------------------------------------------------

 

 

 
 

Frame Mount Centrifugal Series

BERKELEY Type B frame-mount centrifugal pumps are designed for the user who has a separate power source suitable for driving through couplings or with belts. Ideal for all general purpose applications requiring high performance, moderate initial cost and easy maintenance.

Key Features
  • Volute Case Incorporates Precise Geometric Design for Increased Hydraulic Efficiency
  • Thick-Walled Close-Grained Cast Iron to Handle the Stresses of Everyday Use
  • Back Pull-Out Design Allows Easy Removal And Service Without Disturbing Piping Connections
  • Enclosed Impeller Designed and Machined to Optimize Performance and Operating Efficiencies
  • Discharge May Be Rotated To Any of Four Positions for Piping Convenience
Warranty

12 months from date of original installation, or, 24 months from date of manufacture

Owner's Manual: Frame-Mount Type B Centrifugals

DOWNLOAD MANUAL

Owner's Manual: Hydraulic-Motor Frame Mounted Centrifugal Pump Direct Coupling Drive

DOWNLOAD MANUAL

Specifications: B3ZRM

DOWNLOAD SPECS

Downloadable Image Archive: Frame Mount Centrifugals

DOWNLOAD ARCHIVE

Owner's Manual: Belt Driven Frame Mounted Centrifugal Pump - Direct Coupling Drive

DOWNLOAD MANUAL

Owner's Manual: Frame Mount B4JRMBH, B4JRMBHS

DOWNLOAD MANUAL

Owner's Manual: Type 'B' Belt Drive Centrifugal Pumps

DOWNLOAD MANUAL

Drawing: B3ZRM Dimensions

DOWNLOAD DRAWING

Dimensions: B Series Centrifugals

DOWNLOAD DRAWING

Instructions: Shaft Replacement Kit for SAE & Frame Mount

DOWNLOAD INSTRUCTIONS

----------------------------------------------------------------------------------------------------------------------------------------

 

 

 

Close-Coupled Motor Drive Series

BERKELEY Close-Coupled End-Suction Pumps are ideal for most applications requiring high performance, easy maintenance and moderate initial cost. Cast Iron construction with unique back pull-out design permits access to the impeller without disturbing the piping.

Key Features
  • Four-Position Discharge
  • Premium-Grade Motors
  • Motor Bracket
  • Maintenance-Free Shaft Seal
  • Replaceable Slip-On Shaft Sleeve
  • Replaceable Bronze Wear Ring
  • Superior Impeller
  • Heavy-Duty Volute Case
  • Multiple Taps
  • Durable Finish
Warranty

12 months from date of original installation, or, 24 months from date of manufacture

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 
 

Self-Prime Centrifugals

All cast iron construction combined with a unique pump body design provide fast priming, easy service access, and dependable performance.

Self-Primers are available in 4 configurations:

SAE

Air-Cooled (pre-mounted gasoline engine)

Frame Mount

Close-Coupled Electric Motor Drive

Key Features
  • All cast iron construction
  • Intake placed high for improved priming
  • Rapid action flapper check valve eliminated back flow, retains prime in suction line
  • High suction lift of 25' permits installation as remote sump pump
Warranty

12 months from date of original installation, or, 24 months from date of manufacture

-----------------------------------------------------------------------------------------------------------------------------------------

 

 

 

SSCX Series

High-head performance and quiet operation join corrosion-resistant dependability with Berkeley SSCX Series centrifugal pumps.

Typical Applications:

  • Water Circulation
  • Booster Service
  • Liquid Transfer
  • Spray Systems
  • Jockey Pumps
  • OEM Applications
Key Features
  • Stainless-Steel Housing and Shaft – Maximum corrosion resistance in chemical as well as water applications; smooth flow path assures quiet operation.
  • High-Temperature Rating – The SSCX Series centrifugal pump (with 304 SS Impeller) is designed for temperatures to 250°F, making it an ideal choice for a wide range of pump applications and varying temperature conditions. The Noryl® impeller is rated to a maximum operating temperature of 185°F.
  • Mechanical Shaft Seals – Choice of seal options to meet your application needs. All are precision lapped and highly polished for long life and reliability.
  • Impeller Options – 304 Stainless Steel or precision-molded Noryl® feature ultra-smooth flow ports to maximize performance and efficiency.
  • Drain/Vent Ports – Priming and draining is easier, faster.
Warranty

12 months from date of original installation, or 24 months from date of manufacture

-----------------------------------------------------------------------------------------------------------------------------------------

 

 
 
Model DMC Series

Multi-Stage Centrifugal Pumps

The DMC Series multi-stage centrifugal pump offers heads to 175 feet and flows to 50GPM.
Key Features
  • Rugged Construction – Heavy-duty closed-grain cast iron pump case and seal-plate
  • Drain Port – Provided for easy winterization
  • Easy Serviceability – Normal wearing parts are easily accessible for service and replacement, without disturbing piping
  • Heavy-Duty Motors – Designed for continuous operation
Warranty

1 year limited warranty

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 
 

SSHM Self-Priming Multi-Stage Pump

The BERKELEY SSHM-2 Self-Priming Pump is the first to deliver high-pressure performance without priming problems and delays. Designed for minimal electrical consumption and quiet operation, the SSHM-2 takes less time and trouble to produce the water volume and high-pressure needed to meet demanding applications such as:
  • Irrigation Systems
  • Water Supply Systems
  • Shower & Washing Systems
  • Dewatering
  • Heating & Air Conditioning Systems
  • Fountains
Key Features
  • Available in 3-stage or 4-stage designs for more options in head/flow
  • Self-Priming Design  Once initially primed, the SSHM-2 will automatically re-prime cycle after cycle
  • Cast Iron Motor Bracket & Integral Pedestal for rigid pipe connections and base mounting
  • Suction Flange is made of heavy-duty cast iron
  • Precision Molded  Extra-Smooth Ports to maximize efficiency and performance
  • Special Brass Priming Valve, proven to provide trouble-free operation during the priming cycle
  • AO Smith Motor suitable for continuous duty operation
Warranty

12 months from date of original installation, or 24 months from date of manufacture

-----------------------------------------------------------------------------------------------------------------------------------------------------

 

 

Berkeley® Upstaged 4” Submersible Pumps

The Signature 2000® pump design has been delivering dependable performance since 1990. Our floating stage design continues to handle even the most aggressive water with our SignaSeal™ system that breaks down debris and reduces locking. Now we’re going further by upstaging and adding additional features to the 4" submersible pumps you’ve grown to trust and rely on every day!
 
NEW Product Offering
Series: MS and JP
GPM: 5, 7, 10, 15 and 20
HPs: 1/2, 3/4, 1 and 1 1/2
 

What Does This Mean For You?

Better Performance

With increased staging across much of our 1/2 to 1-1/2HP pumps, you'll enjoy even greater performance receiving more depth and/or more flow than before.

Beat the Competition

Our increased staging gives you an average of 20% higher performance than competitive pumps at like horsepower and rated flow. We've even developed a tool to show you how our pumps compare to the top competitors. Visit www.pumps.com/curveenvy.html to compare your pump!

The New Standard in Reliability

Experience the new standard with our redesigned JP series that includes a stronger discharge and added spring-loaded check valve.

COMPARE WITH COMPETITORS

 

-----------------------------------------------------------------------------------------------------------------------------------------------------

 

 
 

MS Series Stainless Steel TrimLine 4" Submersible Pumps

Precision-engineered, high-quality, rugged MS Stainless Steel Series Pumps deliver efficient, dependable performance even in rough, aggressive water.

The TrimLine 5 & 7 GPM Series Pumps are 3-3/4" maximum O.D.  Heads to 1,150 feet and capacities to 10.5 GPM.  Built to deliver long-term, trouble-free service

Key Features
  • Narrow 3-3/4" diameter
  • Floating impeller design resists sand and reduces sand locking
  • These pumps feature the SignaSeal staging system
  • Corrosion-resistant stainless steel discharge

 

Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

-----------------------------------------------------------------------------------------------------------------------------------------------------

 

 
 

MS Series Stainless Steel 4" Submersible Pumps

Precision-engineered, high-quality, rugged MS Stainless Steel Series Pumps deliver efficient, dependable performance even in rough, aggressive water.  Heads to 1,950 feet and capacities to 65 GPM.

Built to deliver long-term, trouble-free service.  Floating impeller design resists sand and reduces sand locking.  These pumps feature the SignaSeal Staging System.

Key Features
  • Floating impeller design resists sand and reduces sand locking
  • These pumps feature the SignaSeal staging system
  • Corrosion-resistant stainless steel body, intake, discharge, and fasteners 
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

-----------------------------------------------------------------------------------------------------------------------------------------------------

 

 

JP Series Composite TrimLine 4" Submersible Pumps

Precision-engineered, corrosion-resistant JP Series Composite Pumps in 5 and 7 GPM deliver efficient, dependable performance even in rough, aggressive water.  Heads to over 850 feet and capacities to 10 GPM.  Built to deliver long-term, trouble-free service.

Key Features
  • Proven SignaSeal Staging System floating stack design resists sand and reduces sand locking
  • TrimLine Models in 5 GPM and 7 GPM models are Narrow at 3-3/4" in Diameter
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
 

BK Series 4" Submersible Pump

The BK Series 4" Submersible Pumps in 5, 7, 10 and 20 GPM models offer dependable performance and value. BK Series pumps will handle dry run conditions.

Proven "Floating Impeller" staging system is designed with a corrosive resistance stainless steel wear surface that greatly reduces problems with abrasives and sand lock-up. 

Key Features
Proven “Floating Impeller” Staging System – Incorporates 1st-in-class performance, sand handling and thrust management staging system with the industry exclusive “dry-run” design element. Reinforced engineered composites and stainless steel, offering high resistance to corrosion and abrasion.

Discharge – Tested-tough, fiberglass-reinforced thermoplastic, with proven internal check valve. Large wrench flats and rope hole.

Shell – 300-grade stainless steel pump shell offers high corrosion resistance.

Shaft – Hexagonal 3/8”, 300-grade stainless steel pump shaft; offers generous impeller drive surfaces.

Shaft Bearing – Exclusive self-lubricating Nylatron® bearing resists wear surface from sand.

Motor Bracket – Tested-tough, fiberglass reinforced thermoplastic; incorporates an integral suction screen.

Cable Guard – Corrosion resistant rigid PVC with 300-grade stainless steel fasteners.

Warranty

12 months from date of original installation, or 18 months from date of manufacture

 

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

1
 

JP Series Composite 4" Submersible Pumps

Precision-engineered, corrosion-resistant JP Series Composite Pumps in 10, 15, 20, and 30 GPM deliver efficient, dependable performance even in rough, aggressive water.  Heads to over 650 feet and capacities to 45 GPM. Built to deliver long-term trouble-free service.

Key Features
  • SignaSeal Staging System with Floating Impeller Design Resists Sand and Reduces Sand Locking
Warranty

12 months from date of original installation, or 18 months from date of manufacture

 

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

Mining Deepset 4" Submersible Pump Series

Precision-engineered, high-quality, rugged Mining Deepset Series Pumps deliver efficient, dependable performance even in rough, aggressive water.

Heads to 1,950 Feet and Capacities to 65 GPM.  Built To Deliver Long-Term, Trouble-Free Service.  Higher Temperature Engineered Thermoplastic SignaSeal Staging With Floating Impeller Design Resists Sand and Reduces Sand Locking.

Key Features
  • SignaSeal Staging System Incorporates Higher-Temperature Thermoplastics, Harder-Than-Sand Ceramic Wear Surface, and Floating Impeller Design Reducing Problems With Abrasives, Sand Lock-Up, and Running Dry
  • 300-Grade Stainless Steel Discharge For Corrosion-Resistant Durability
  • Nylatron® Discharge Bearing Resists Wear From Sand
  • 300 Grade Stainless Steel Intake For Durability in Aggressive Water
  • Positive Drive Shaft Made From "Treated" 7/16" Hexagonal Heavy-Duty 300 Grade Stainless Steel
  • Stainless Steel Coupling Press Fit To Pump Shaft.  Couples To All Standard NEMA Motors
  • Highest Grade Shell - Heavy-Walled Corrosion-Resistant Stainless Steel
  • All Screws, Washers, and Nuts Are Corrosion-Resistant 300-Grade Stainless Steel
  • PENTEK® XE Motor:   2- and 3-Wire NEMA Standard All Stainless Construction, Water Filled
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

1
 

70 GPM 4" Submersible Pump Series

Precision-engineered, quality built, and rugged 70 GPM Series submersibles may be used in wells 4" or larger. 

Key Features
  • Heavy-Duty Cast Iron Discharge Provides Smooth Water Passage to Column Pipe
  • Polycarbonate Impellers Provide Smooth Water Passages for Minimum Friction Loss  This Ensures Optimum Pump Efficiency
  • Highly Efficient Hydraulic Design Pump Bowls in Gray Cast Iron
  • Bronze Upthrust Bearing Provides Positive Momentary Upthrust Protection During Start-Up
  • Precision Straightened Pump Shaft In Corrosion-Resistant Stainless Steel
  • Stainless Steel Pump/Motor Coupling for Maximum Corrosion Resistance.  Precision Machined to Ensure Accurate Alignment and Power Transfer
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

1
 
 

75 & 90 GPM Big-Flo 4" Submersible Pump Series

The 75 & 90 GPM Stainless Steel Big-Flo 4" Submersible Pumps deliver efficient and dependable performance even in rough, aggressive water.  Heads to 410 feet and capabilities to 120 GPM.  Built to deliver long-term, trouble-free service.  FDA compliant engineered composite and stainless steel components.

Key Features
  • Heavy-Duty 300 grade Stainless Steel Discharge Provides Smooth Water Passage to Column Pipe.  Large Wrench Flats and Rope Hole Built In.
  • Field-Proven, Sealed and Lubricated Top Bearing Assembly Keeps Abrasives Out, Ensuring Long Bearing Life
  • 20% Glass-Reinforced Polycarbonate Impellers to Resist Abrasives and Provide Smooth Water Passage For Minimal Friction Loss
  • Stainless Steel Up-Thrust Bearing With Phenolic Washers At Each Stage Provide Excellent Wear Resistant Surfaces
  • Urethane Diffuser Bearings at Each Stage Provide Radial Protection and Stability and Excellent Resistance to Sand Damage
  • 300 Grade Precision Cast Stainless Steel Motor Bracket Incorporates an Efficient Hydraulic Design for Maximum Volume and Access to Motor Mounting Nuts.
  • Corrosion Resistant Motor Shaft's Hex Shape Offers Generous Impeller Drive Surfaces
  • Sintered 300 Grade Stainless Steel Pressed On Motor Coupling for Maximum Corrosion Resistance
  • Heavy Gauge 300 Series Stainless Steel Pump Shell is Durable and Offers High Corrosion Resistance
  • 300 Series Stainless Steel Intake Screen Offers Maximum Corrosion Resistance and Protects Against Damaging Solids Entering the Pump
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model SJH Series

SJH Series Stainless Steel Shallow Well Jet Pumps

ClearJet models provide excellent performance with good pressure for wells to 25' deep.  Self-priming after the priming chamber has been filled with water

Key Features
  • Stainless Steel Pump Body Provides Maximum Resistance To Corrosion
  • Built-In Jet Made of High Strength Thermoplastic Components
  • Mechanical Shaft Seal with Highly Polished Carbon-Ceramic Faces and Stainless Steel Components
  • Superior Insulation Materials Protect Motor Windings Against Excessive Moisture and Contaminants
  • Dynamically Balanced Rotor is Die Cast Under High Pressure For Uniform Performance and Greater Efficiency
  • Heavy-Duty Ball Bearings:  Shielded, Permanently Lubricated Bearings, Extensively Tested To Ensure Extended Life and Smooth, Quiet Operation
  • Stainless Steel Pump and Motor Shaft Provides Maximum Corrosion Resistance; One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Motor Cover Protects All Electrical Components From Dirt, Dust and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components
  • Quality Pressure Switch with Fixed 20 PSI Differential
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Print  print

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

HN Series Shallow Well Jet Pumps

ProJet HN models provide excellent performance with good pressure for wells to 25' deep.  Self-priming after the priming chamber has been filled with water.

Key Features
  • Quality Construction Using Close-Grained Cast Iron
  • Built-In Jet and Nozzle Made of High Strength Lexan® for Maximum Resistance to Corrosion and Abrasion
  • Precision Molded Diffuser Means Pump Primes Faster and Handles More Air
  • NORYL® Impeller is Precision-Molded for Perfect Balance.  Ultra-Smooth for Highest Performance and Efficiency
  • Mechanical Shaft Seal is Precision Lapped and Highly Polished Carbon-Ceramic with Stainless Steel Parts.  Internal Design Guarantees Continuous Water Lubrication
  • Superior Insulation Materials On the Motor Windings Protect Against Excessive Moisture and Contaminants
  • Heavy-Duty Ball Bearings are Shielded and Permanently Lubricated.  Extensively Tested to Ensure Extended Life and Smooth Operation
  • Pressure Switch is Professional Quality.  Allows Adjustable Cut-In and Differential Settings (20 PSI)
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

SN Series ProJet Shallow Well Jet Pumps

ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25' deep.  Self-priming after the priming chamber has been filled with water.

Key Features
  • Quality Close-Grained Cast Iron Body Plus Drain Port Provided for Easy Winterizing
  • Built-In LexanTM Jet Nozzle and Venturi for Maximum Resistance to Corrosion and Abrasion
  • Clean Out Plug Provided for Ease of Service
  • NORYL® Impeller is Precision Molded  for Perfect Balance ... Ultra-Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Means Pump Primes Faster, Handles More Air with Multi-Port, Precision Molded, Reinforced Polypropylene Diffuser
  • Carbon-Ceramic Mechanical Shaft Seal with Stainless Steel Parts
  • Superior Insulation Materials Protect Motor Windings Against Excessive Moisture and Contamination
  • Balanced Rotor Is Die Cast Under High Pressures and Dynamically Balanced for Uniform Performance and Greater Efficiency
  • Heavy Duty Ball Bearings are Shielded and Permanently Lubricated to Provide  Extended Life and Smooth Quiet Operation
  • Stainless Steel Pump and Motor Shaft for Maximum Corrosion Resistance.  One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Cover  Protects All Electrical Components from Dirt, Dust, and Insects ;  Ventilating Air Cannot Contaminate Vital Switching Components
  • Professional Quality Pressure Switch Has Adjustable Cut-In with Fixed Differential of 20 PSI
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

FN Series Cast Iron Shallow Well Jet Pumps

The FN Series provides strong performance with good pressure for wells to 25' deep.  Self-priming after the priming chamber has been filled with water.

Key Features
  • Close-Grained Cast Iron Body and Base are Specially Treated for Corrosion Resistance.  Drain Port Provided for Easy Winterizing
  • Built-In Jet Made of  High Strength Polycarbonate Nozzle and Venturi for Maximum resistance to Corrosion and Abrasion.  Clean-Out Plug Provided for Ease of Service
  • Noryl® Impeller is Precision Molded for Perfect Balance ... Ultra-Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Allows Faster Priming, Handles More Air With Multi-Port, Precision-Molded Reinforced Polypropylene
  • Carbon-Ceramic Mechanical Shaft Seal is Precision Lapped and Highly Polished.  Internal Design Guarantees Continuous Water Lubrication
  • Superior Insulation On Motor Windings Protects Against Excessive Moisture and Contamination .... Assures Prolonged Motor Life
  • Dynamically Balanced Die-Cast Rotor for Uniform Performance and Greater Efficiency
  • Heavy-Duty Ball Bearings are Sealed and Permanently Lubricated to Ensure Extended Life and Smooth Quiet Operation
  • Stainless Steel Pump and Motor Shaft Provide Maximum Corrosion Resistance.  One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Cover Protects All Electrical Components From Dirt, Dust, and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components
  • Professional Grade Pressure Switch Allows Adjustable Cut-In With Fixed Differential (20 psi)
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

1
 
Model FH Series

Shallow Well, Cast Iron Jet Pump

The FH Series Jet Pump provides best-in-class performance for shallow wells up to 25' deep and flows over 20GPM.
Key Features
  • High performance and efficiency with high strength for longevity – Precision molded noryl® impeller with 300 grade stainless insert
  • High performance and efficiency with superior abrasion resistance – Precision molded reinforced polypropylene diffuser, nozzle and venturi
  • Facilitates plumbing of accessories and easy access to nozzle for cleanoutcast iron pump case with 1-1/4" suction and 1" discharge ports, two 1/4" auxiliary pressure ports and cleanout plug
  • Positive alignment between pump case and motorRugged cast iron seal plate
  • Industry standard switch is easily field replaceable – Factory installed Square D pressure switch with fixed 20 pound differential and 1/4" NPT port 
  • Every pump unit is factory tested – Peace of mind for you and your customer
Warranty
1 year limited warranty

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

PN Series Corrosion-Resistant Shallow Well Jet Pumps

PN Series pumps are corrosion- and abrasion-resistant and are ideal for wells with pumping levels of 25' or less. 

Self-priming after the pump housing is initially filled with water.  Capacities to 13 GPM.  Available in 1/2 or 3/4 HP models.

Key Features
  • Quality Constructed of Fiberglass-Reinforced Thermoplastic Polypropylene for Total Corrosion Resistance
  • Built-In Jet Assembly:  NORYL® Nozzle and Venturi
  • Precision-Molded Polycarbonate Impeller for Perfect Balance .... Ultra-Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Allows Pump to Prime Faster and Handle More Air
  • Heavy-Duty Motor With Stainless Steel Shaft and Dual Heavy Duty Ball Bearings
  • Dual Voltage Capability:  1/2 and 3/4 HP Models Have Dual Voltage Motors and are Shipped at the 230v Setting
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

HL Series Cast Iron Convertible Jet Pumps

The ProJet HL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 - 1 HP models.  The ProJet HL convertible jets utilize the BERKELEY® built-in regulators offering easier priming and better range of performance from a complete line of shallow well, 4" double pipe, 2" and 3" single pipe jet packages.

Key Features
  • Quality Close-Grained Cast Iron Pump Body is a Rugged One-Piece Unit, Specially Treated to Resist Corrosion.
  • NORYL® Impeller is Precision Molded for Perfect Balance ..... Ultra Smooth for Highest Performance and Efficiency
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

1
 

SL and SLJ Series Cast Iron Convertible Jet Pumps

The ProJet SL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 thru 1-1/2 HP models.  The ProJet SL convertible jets utilize BERKELEY® built-in regulators offering easier priming and better range of performance from a complete line of shallow well, 4" double pipe, 2" and 3" single pipe jet packages.

Key Features
  • Quality Cast Iron Construction:  Pump Body is Rugged One-Piece Unit, Specially Treated to Resist Corrosion.  Drain Port Provided for Easy Winterizing
  • Precision Molded NORYL® Impeller for Perfect Balance..... Ultra Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Primes Faster, Handles More Air.  Multi-Port, Precision-Molded Reinforced Polypropylene
  • High Quality Pressure Switch With Adjustable Cut-In Setting.  Fixed 20 PSI Differential
  • Mechanical Shaft Seal With Precision Lapped Highly Polished Carbon-Ceramic Surfaces and Stainless Steel Construction
  • Superior Insulations Materials on Motor Windings Protect Against Excessive Moisture and Contaminants .... Assures Prolonged Motor Life
  • Balanced Rotor is Die Cast Under High Pressures for Uniform Performance and Greater Efficiency
  • Shielded, Permanently Lubricated Ball Bearings, Extensively Tested to Ensure Extended Life and Smooth, Quiet Operation
  • 416 Stainless Steel Pump and Motor Shaft for Maximum Corrosion Resistance.  One Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Motor Canopy Protects All Electrical Components From Dirt, Dust and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components ... The Most Common Cause of Motor Failure
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

FL and FLJ Series Cast Iron Convertible Jet Pumps

FL Series Pumps feature a proven self-priming "convertible" design.  the same convertible jet can be attached to the pump for use in shallow well installations, or be utilized in 4" or larger wells for use as a double pipe deep well jet.

FL Series Pumps provide high capacities up to 11 GPM ... depths to 90 feet.  They are rated for 30-50 PSI operation

Key Features
  • Quality Cast Iron Construction:  Pump Body is Rugged One-Piece Unit, Specially Treated to Resist Corrosion.  Drain Port Provided for Easy Winterizing
  • Precision Molded Lexan® Impeller for Perfect Balance..... Ultra Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Primes Faster, Handles More Air.  Multi-Port, Precision-Molded Reinforced Polypropylene
  • High Quality Pressure Switch With Adjustable Cut-In Setting.  Fixed 20 PSI Differential
  • Mechanical Shaft Seal With Precision Lapped Highly Polished Carbon-Ceramic Surfaces and Stainless Steel Construction
  • Superior Insulations Materials on Motor Windings Protect Against Excessive Moisture and Contaminants .... Assures Prolonged Motor Life
  • Balanced Rotor is Die Cast Under High Pressures for Uniform Performance and Greater Efficiency
  • Shielded, Permanently Lubricated Ball Bearings, Extensively Tested to Ensure Extended Life and Smooth, Quiet Operation
  • 416 Stainless Steel Pump and Motor Shaft for Maximum Corrosion Resistance.  One Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Motor Canopy Protects All Electrical Components From Dirt, Dust and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components ... The Most Common Cause of Motor Failure
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

PL Series Corrosion-Resistant Convertible Deep Well Jet Pumps

Durability and corrosion resistance are built into every PL Series Pump due to the rugged fiberglass reinforced thermoplastic pump construction.  The engineered composite components are lightweight yet extremely resistant to sand and abrasive wear.  The non-corrosive design and exceptional strength assure years of trouble-free operation.

Key Features
  • Lightweight Rustproof Pump Body Is Made of Dura-Glas -- Fiberglass Reinforced Thermoplastic.  All Components In Contact With Water Are Resistant To the Corrosive and Abrasive Forces Found In The Most Aggressive Water Conditions
  • Multi-Port, Reinforced Polypropylene Diffuser Design Primes Faster and Handles More Air
  • Precision Molded Noryl® Impeller Gives Perfect Balance and Ultra Smoothness for Highest Performance and Efficiency
  • Performance-Proven, Built-In Regulator is Adjustable For Best Performance On All Deep Well Installations. 
  • Stainless Steel Shaft Seal Acts As Heat Sink To Provide Maximum Cooling of the Shaft Seal
  • Dustproof Canopy On Motor Completely Encloses Electrical Components and Provides Dust, Dirt and Insect Protection.  Ventilating Air Cannot Contaminate Vital Switching Components
  • Permanently Lubricated, Heavy Duty Ball Bearings Ensure Smooth, Quiet Operation
  • Easy Serviceability Due to the Easy-To-Remove Stainless Steel Clamp.  Piping Does Not Have To Be Disturbed.   Seals Can Be Replaced In Just A Few Minutes
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

LT2 Horizontal Multi-Stage Jet / Centrifugal Series

LT2 Series Multi-Stage jet pumps are the highest performing pumps available in the category. The LT2 Series Convertible Jets utilize the BERKELEY® built-in regulator, offering easier priming and better range of performance from a complete line of Shallow Well, 4" Double Pipe, 2", and 3" Single Pipe Jet Packages. Pump may also be operated as a self-priming centrifugal (to 25 ft) to provide a wide range of high pressure applications.

Key Features
  • Automatic Pressure Regulator - Faster-acting and quieter design eliminates "hunting" for correct drive pressure.  New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells.
  • Quality Construction - Close-grained cast iron pump body is a rugged, one-piece unit.  Specially treated to resist corrosion.  Drain port provided for easy winterization.
  • Precision Machined Diffusers - for faster priming
  • Mechanical Shaft Seal - Precision lapped  and highly polished carbon-ceramic, stainless steel construction.  Internal design guarantees continuous water lubrication for maximum protection
  • Polycarbonate Impellers - Precision molded for perfect balance, and ultra-smooth for highest performance and efficiency
  • Motor Windings - Superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life
  • Dustproof Cover - All electrical components are protected from dirt, dust and insects by a dustproof canopy.  Ventilating air cannot contaminate vital switching components.  This eliminates the most common cause of motor failure
  • Balanced Rotor - Rotor is die cast under high pressures for uniform performance and greater efficiency, dynamically balanced
  • Heavy-Duty Ball Bearings - Shielded, permanently lubricated bearings are extensively tested to ensure extended life and smooth quiet operation
  • Pump and Motor Shaft - One piece threaded shaft for positive impeller drive and alignment.  Shaft is stainless steel for maximum corrosion resistance
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model MS Series

Vertical Multi-Stage Deep Well Jet Pumps

The MS Series Vertical Jet Pumps are the industry standard deep well jet pumps for over-the-well "bolt-on" installations.  These pumps include the pre-plumbed BERKELEY® external automatic regulator, pressure gauge, pressure switch, and a complete line of casing adapters to drive the 4" double pipe or 2" and 3" single pipe jet packages.

Key Features
  • Automatic Pressure Regulator With a Faster Acting and Quieter Design Eliminates "Hunting" For the Correct Drive Pressure.  New Improved Stem and Guide are Precisely Molded to Assure Efficient, Trouble-Free Performance On All Deep Wells
  • Quality Built Precision Machined, Close Grained Cast Iron Body and Base Are Specially Treated to Resist Corrosion
  • Precision Molded Noryl Impellers for Perfect Balance.  Ultra-Smooth for Highest Performance and Efficiency
  • High Quality Pressure Switch With Adjustable Differential and Cut-In/Cut-Out Pressure Settings
  • Superior Insulation Materials Protect Motor Against Excessive Moisture and Contaminants to Ensure Prolonged Motor Life
  • Mechanical Shaft Seal Has Precision Lapped and Highly Polished Carbon-Ceramic Surfaces.  Internal Design Guarantees Continuous Water Lubrication For Maximum Protection
  • Dustproof Motor Cover Protects All Electrical Components From Dirt, Dust, and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components
  • Dynamically Balanced Rotor is Die Cast Under High Pressure For Uniform Performance and Greater Efficiency
  • Heavy-Duty Permanently Lubricated Ball Bearings Are Extensively Tested To Ensure Extended Life and Smooth, Quiet Operation
  • One-Piece Stainless Steel Threaded Pump and Motor Shaft for Positive Impeller Drive and Alignment. 
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

 
------------------------------------------------------------------------------------------------------------------------------------------------------
 
 

 

Jet Pump / Tank Combination Systems

PRO-Source™ Water System Packages are handy and economical pump/tank packages for the professional contractor. The PRO-Source Water System Packages utilize the ProJet cast iron jet pumps and the dependable PRO-Source quality pressurized steel tanks.

Plumbing connections are made using galvanized fittings and 3-ply nylon reinforced vinyl tubing with stainless steel hose clamps. Ideal for installations where there is limited space.

Key Features
  • Rugged cast iron pump
  • Pre-charged steel pre-charged tank
  • Perfect for tight areas
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

LTHH Self-Priming Centrifugal Pumps Series

The LTHH Series of cast iron sprinkler pumps offer superior un-matched performance.  Available in 1 HP through 2-1/2 HP models.  These pumps offer "single body fill" priming to 25 foot lifts, in less than 5 minutes.

LTHH models exceed the strict safety requirements of Underwriters Laboratory UL778, and CSA, required by many state and local codes.

The LTHH models are completely interchangeable with the original BERKELEY LTH Series models, saving costly plumbing changes.

Key Features
  • Rugged Construction - Body made of close-grained cast iron
  • High Head Models deliver up to 145' of head with capacities to 95 GPM
  • Easy Serviceability - Normal wearing parts are easily accessible for service and replacement without disturbing piping or mounting
  • Motor Windings use superior insulation materials to protect against excessive moisture and contaminants.  Ensures prolonged motor life
  • Balanced Rotor is die cast under high pressures for uniform performance and greater efficiency
  • Drain Port provided for easy serviceability
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------
 
 
 

BPD Corrosion-Resistant Self-Priming Sprinkler Pump Series

Quick-priming BPD Series Pumps feature lightweight construction in a self-priming design.  These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump contractor.

Applications include:

  • Lawn & Landscape Sprinkling Out of Tanks or Cisterns
  • Light Chemical Transfer for Compatible Fluids
Key Features
  • Quality Construction - Fiberglass Reinforced Thermoplastic Provides Total Corrosion Resistance and High Resistance to Sandy Water
  • Lightweight Design - Space-Age Materials Make These Pumps More Portable Than Conventional Cast Iron Pumps
  • Composite Impeller - Highest Performance and Efficiency From Ultra-Smooth Materials Precision Molded For Perfect Balance
  • Easily Serviced - Normal Wearing Parts Are Easily Accessible For Service And Replacement Without Disturbing Piping or Mounting
  • Dustproof Cover - Electrical Components Protected From Dust and Insects
  • Heavy-Duty Motor - 1 thru 2-1/2 HP Motors Designed For Continuous Operation Have Stainless Steel Shaft
  • Dual Voltage Capability - 1 and 1-1/2 HP Motors Have Dual Voltage Motors And Are Shipped At The 230 Volt Setting.   2 and 2-1/2 HP are 230 Volt Setting Only
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
 
Model LTM & LTH Series

Self-Priming, Cast Iron Centrifugal Pumps

Some of the fastest priming pumps on the market.  Available in both high head (LTH) or medium head (LTM) Series.  Feature leak-proof mechanical seals, easy service design, heavy-duty motors, and rugged construction.

Available in 3 and 5 HP models.

Optional 6" and 8" trap packages are available

Key Features
  • Heavy-Duty Motors - on Both High and Medium Head Models
  • Drain Port - Provided For Easy Servicing
  • Medium Head Models - Deliver Up To 115' of Head With Capacities to 159 GPM
  • High Head Models - Deliver Up To 138' of Head With Capacities to 162 GPM
  • Easy Serviceability - Normal Wearing Parts Easily Replaced Without Disturbing Piping or Mounting
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model ECC5 Series

Self-Priming Centrifugal Pumps

The ECC5 Series self-priming centrifugal pump is a rugged cast iron pump capable of priming up to 20' vertically and will handle solids up to 0.225" in diameter.

Key Features
  • Mechanical Shaft Seal - Buna-N Elastomers, Carbon and Ceramic Sealing Faces, with Stainless Steel Metal Parts
  • Heavy-Duty Ball Bearing Motor  - Shielded, Permanently Lubricated, Bearings, Extensively Tested to Ensure Extended Life and Smooth, Quiet Operation
  • Built-In Check Valve and Thermal Overload
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model CP / CB Series

High and Medium Head Cast Iron Centrifugals

The CP/CB Series Pumps have a heavy-duty cast iron construction and are offered in high and medium head models, with Noryl® or brass impeller. Applications include water systems and sprinkling for homes, farms and industry.
 
Options Available:
  • TEFC motors
  • Seal options include
  • Viton® with Carbon/Ceramic faces, includes Viton O-ring change out in pump volute.
  • Viton® with Carbon/Silicon Carbide faces, includes Viton O-ring change out in pump volute.
Key Features
  • 1/3 through 2-1/2 HP – High head and medium head models, with heavy-duty motors, easy service design and four-position discharge.
  • Drain Port – Provided for easy winterizing.
  • Medium Head Models – Deliver up to 110' of head with capacities to 140 GPM.
  • High Head Models – Deliver up to 140' of head with capacities to 90 GPM.
  • Easy Serviceability – All models include replaceable wear ring and feature back pull-out design.
  • CP Series with Noryl® Impellers – Abrasion-resistant for normal applications with working temperatures to 140°F.
  • CB Series with Silicon Bronze Impellers – CB pumps equipped with shaft seals rated for temperatures to 225°F.
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

Type C Series Straight Centrifugal

The Type C Pump is a compact, horizontal, single stage, centrifugal pump close-coupled to an electric motor. The removal of readily accessible bolts (back pull-out construction), permits the removal of the pumping element, exposing the impeller and seal for inspection, without disturbing the piping.
 
Applications include general farm or home irrigation, air conditioning, and refrigeration.
Key Features
  • Manufacture – Carefully manufactured with materials best suited for water pump applications assures a unit with long life and dependability.
  • Bracket – Sturdy cast iron bracket houses seal and maintains positive alignment between motor and volute case.
  • Volute Case – Precision machined gray cast iron, with NPT tapped openings for suction and discharge. Standard discharge position is horizontal. Volute may be rotated for vertical-up discharge.
  • Impeller – Enclosed multi-vane silicon bronze impeller is balanced to eliminate vibration and provide smooth, quiet operation. Impeller is threaded on motor shaft for positive alignment.
  • Shaft Seal – Self-adjusting, water-cooled, mechanical shaft seal prevents leakage and eliminates need for drain piping. Run-in and periodic adjustment is not required.
  • Motor Shaft – Stainless steel shaft is threaded for direct mounting of impeller. Shaft extension to impeller is short to increase shaft rigidity and to extend bearing life.
  • Motor – Heavy-duty, 3 HP, flange-mounted, motor designed for continuous 3600 RPM operation. Two ball bearings are permanently lubricated, eliminating the need for re-lubrication service. Open, drip-proof enclosures are standard. All models can be furnished with either single-phase (230V) or three-phase (230/460) motors. Totally enclosed fan-cooled motor is available for three-phase power.
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

MGP / MGPS High-Pressure Booster Series

The MGP/MGPS Booster Pumps are the most durable booster pump available. The proven SignaSeal floating impeller design minimizes thrust loads, allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components.

 

Applications include:

  • Residential, commercial or agricultural pressure washing
  • Booster and spray systems
  • Filtration and reverse osmosis
  • HVAC
  • General purpose pumping
Key Features
  • Proven Multi-Stage Design – Abrasion and dry-run resistant
  • Acetal Impellers – Precision molded for perfect balance…ultra-smooth for highest performance and efficiency.
  • Precision Molded Diffusers – Superior performance with high resistance to corrosion and abrasion
  • Mechanical Shaft Seal – Precision lapped and highly polished carbon ceramic, stainless steel construction. Internal design guarantees continuous water lubrication.
  • Motor Windings – Superior insulation materials protect against excessive moisture and contaminants…assure prolonged motor life
  • Balanced Rotor – Die cast under high pressures for uniform performance and greater efficiency; dynamically balanced
  • Heavy-duty Ball Bearings – Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
  • Pump and Motor Shaft – Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive
  • Dustproof Cover – All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate.
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

LT2 Horizontal Multi-Stage Jet / Centrifugal Series

LT2 Series Multi-Stage jet pumps are the highest performing pumps available in the category. The LT2 Series Convertible Jets utilize the BERKELEY® built-in regulator, offering easier priming and better range of performance from a complete line of Shallow Well, 4" Double Pipe, 2", and 3" Single Pipe Jet Packages. Pump may also be operated as a self-priming centrifugal (to 25 ft) to provide a wide range of high pressure applications.

Key Features
  • Automatic Pressure Regulator - Faster-acting and quieter design eliminates "hunting" for correct drive pressure.  New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells.
  • Quality Construction - Close-grained cast iron pump body is a rugged, one-piece unit.  Specially treated to resist corrosion.  Drain port provided for easy winterization.
  • Precision Machined Diffusers - for faster priming
  • Mechanical Shaft Seal - Precision lapped  and highly polished carbon-ceramic, stainless steel construction.  Internal design guarantees continuous water lubrication for maximum protection
  • Polycarbonate Impellers - Precision molded for perfect balance, and ultra-smooth for highest performance and efficiency
  • Motor Windings - Superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life
  • Dustproof Cover - All electrical components are protected from dirt, dust and insects by a dustproof canopy.  Ventilating air cannot contaminate vital switching components.  This eliminates the most common cause of motor failure
  • Balanced Rotor - Rotor is die cast under high pressures for uniform performance and greater efficiency, dynamically balanced
  • Heavy-Duty Ball Bearings - Shielded, permanently lubricated bearings are extensively tested to ensure extended life and smooth quiet operation
  • Pump and Motor Shaft - One piece threaded shaft for positive impeller drive and alignment.  Shaft is stainless steel for maximum corrosion resistance
Warranty

12 months from date of original installation, or 18 months from date of manufacture

Performance

-------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model PSP series

Pro-Source® Plus Premium Steel Pressure Tank Series

Pro-Source® Plus steel pressure tanks are designed and manufactured for lasting durability and value. From 19 - 119 gallons maximum capacity.
Key Features
  • 100% Leak Tested
  • Heavy-Gauge Steel Tank Construction
  • Seamless, One-Piece Water Cell
  • Electrostatically-Applied Polyester Paint
  • Tested-Tough Composite Base
  • Metal Air Valve Assembly
  • Stainless Steel Service Connection
Warranty

5 years from date of original installation

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model PS Series

Pro-Source® Steel Pressure Tank Series

Pro-Source Pressurized Water System Steel Tanks. From 2 - 199 gallons maximum capacity. Both vertical and horizontal models available.
Key Features
  • Heavy-Gauge Steel
  • Electrostatically-Applied Polyester Paint
  • Seamless, One-Piece Water Cell
  • One-Piece Composite Service Connection
Warranty

5 years from date of original installation

Performance

 
------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model PSC Series

Pro-Source® Composite Fibrewound Pressure Tank Series

Designed and manufactured with capacities to match a wide range of fresh-water needs, Pro-Source composite tanks are the choice for lasting durability and value. From 14 - 119 gallons maximum capacity.
Key Features
  • Rugged Outer Shell
  • Exclusive, Replaceable Butyl Air Cell
  • One-Piece Molded Inner Liner
  • 300-Grade Stainless Steel Service Connection
  • Exclusive Top-Mount Access
  • Designed For Easy Installation
  • Rotatable Base with Quick Connect
Warranty

5 years from date of original installation

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model AW Series

Pro-Source® Steel EpoxyLined Air-Over-Water Tank Series

The EpoxyLine is an excellent corrosion-resistant tank available in a variety of sizes for use in water systems applications, as a retention tank or holding tank.
Key Features
  • Quality Construction: The precision press fit head and wrapper minimize the possibility of large gaps between components. This manufacturing process reduces the possibility of corrosion and seam leaks.
  • Heavy Gauge Steel: Sturdy construction is emphasized, with heavier gauge steel than most tanks. This minimizes the possibility of dents from mishandling, and rust-through.
  • Powder Epoxy Coating: The insides of the tanks are electrostatically powder-coated and then are oven baked to ensure proper adhesion and consistent coverage. This paint process offers superior corrosion resistance over traditional wet paints.
  • Flush Mount Fittings: Designed to solve one of the toughest corrosion problems, these fittings eliminate flanges and sharp angles that make paint adherence difficult.
Warranty

3 years from date of original installation

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model FCT Series

Pro-Source® Composite Fibrewound Contact Tank Series

Pro-Source Composite Contact Tanks are impervious to chemicals found in aggressive water. From 40 - 120 gallon maximum capacity.
Key Features
  • Impervious to Chemicals Found in Aggressive Water
  • Inlet / Outlet PVC Side Connections Allow for Straight T-Connection on Bottom of Tank for Easy Piping
Warranty

5 years from date of original installation

-----------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model SP Series

Pro-Source® SidePort Composite Fibrewound Contact Tank Series

Pro-Source SidePort Composite Contact Tank - Constructed of all NSF / FDA listed materials, these SidePort fibrewound tanks contain no harmful traces of metal that could pass into your water.
Key Features
  • Superior Design Composite Construction
  • Environmentally Safe and 100% Lead-Free
  • 10% More Drawdown Efficiency than Similar-Sized Conventional Tanks
  • Additional urethane Coating
Warranty

5 years from date of original installation

Performance

-------------------------------------------------------------------------------------------------------------------------------------------------------

Model XE-6

Pentek® XE-6, 6" Submersible Motor Series for Ag/Irrigation

The Pentek XE-6 submersible motor combines outstanding performance and durability with innovative and advanced design features to provide the perfect solution for your submersible motor needs.

Key Features

Encapsulated design - offers superior insulation, heat transfer properties, and stability to the motor windings.

Lower amp draw, higher efficiencies (vs leading 6" submersible motors) = lower operating costs.

EXCLUSIVE - Advanced Protection System - provides three layers of defense against sand and debris intrusion:

  1. External sand slinger boot:
    Features a labyrinth seal design to better capture any sand or debris, keeping it away from the shaft
  2. Lip Seal:
    Located below the sand slinger, providing an extra layer of defense
  3. Mechanical seal - silicon carbide:
    Excellent abrasion, wear, and corrosion resistance
    Resists deflection in high-pressure, high-heat, and high-speed conditions
    High thermal conductivity (heat dissipation)
    Provides superior protection against sand intrusions
Thrust bearings - water-lubricated, Kingsbury-type. Thrust ratings are between 3% and 35% better than leading 6" submersible motors
 
Motor lead - 17' - potted connection, including ground wire. Non-jacketed wire assembly for easier handling and connections. Fully field replaceable.
 
Exceptional insulation rating (Class F) and temperature rating (95 F/ 35 C)
IP 68 protection rating
Vertical or horizontal operating orientation
VFD-compatible
 
Assembled in the USA

------------------------------------------------------------------------------------------------------------------------------------------------------

 

Berkeley Vertical Multi-Stage (BVM) Series

MADE TO SUPPLY WATER - Now featuring higher flow and pressure ranges!

The BVM, BVMI, BVMX are non-self priming vertical multistage pump of in-line design, with flange, NPT and grooved connections and stainless steel stage construction. Premium efficiency pump motors are available.

Pump stub shaft and motor shaft of the NEMA standard motor are directly close coupled

Applications include:

Water Supply High Pressure Washes
Pressure Boosting Systems Liquid Transfer
Water Treatment/Filtration Firefighting Systems
Boiler Feed Irrigation
Jockey Pumps  
 
Visit the Berkeley Revolution website for more information.
Key Features
  • Flow series: 1, 3, 5, 10, 15, 20, 33, 45, 64, 90, 120 & 150*
  • Flanged, NPT or grooved connections
  • Cartridge Mechanical Seal - can be replaced easily without dismantling the pump
  • Continuous-duty, high efficiency designs
  • Heavy-duty cast motor bracket insures proper motor alignment
  • High-thrust Open Drip or TEFC enclosure motor options
  • Versatility in performance and design
  • Retrofits easily in existing and new installations, reducing valuable downtime
  • Lower operating costs
Warranty

12 months from date of original installation, or 18 months from date of manufacture

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model 7TMH

7TMH Subturbine Series

The 7TMH pump series features abrasion and corrosion resistant materials for maximum performance and longevity under the toughest operating conditions, and delivers industry-leading efficiencies and head per stage.

Key Features
  • Discharge – Ductile iron ASTM 536-84: Threaded with large wrench flats and sized for the pump’s flow range
  • Upthrust nut / screw - 304 Stainless Steel: Factory pre-set upthrust screw is retained by a stainless steel locknut, providing maximum upthrust protection.
  • Discharge bearing - Vesconite®: Low friction, no water swell, long life. Specific for water-immersed applications, clean or dirty
  • Shaft - 416 stainless steel: Precision ground and polished for reduced running friction and increased service life
  • Impeller - 304 stainless steel, investment cast: Smooth and efficient performance, long life
  • Bowls - Class 30 cast iron: Heavy-walled construction incorporates precision hydraulic design for maximum efficiency and performance. Coated internal passageways on the 7TMH series increases overall pump efficiency and performance.
  • Isolator bearings - neoprene: Unique design channels abrasives away from the stainless steel shaft bearing journal.
  • Lead guard - 302 stainless steel: Protects the motor leads across the full length of the pump (not shown)
  • Suction bracket - Ductile iron: ASTM 536-84 Available with either 6” or 8” intake adapters. Designed to effectively divert debris away from the spline engagement area, maximizing durability.
  • Suction screen – 304 stainless steel: Form fitted, provides corrosion resistance, and prevents particulates larger than .19” (4.8 mm) from entering the pump (not shown).
  • Sand boot - Buna-N (nitrile rubber): Protects coupling and motor splines from abrasive wear.
  • Motor coupling - 416 stainless steel: Fully machined for positive fit; highly corrosion resistant
Vesconite® is a registered trademark of Virginia Engineering Services (Pty) Limited. Berkeley® and Pentair are registered trademarks of Pentair plc

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model 6TMH

6TMH Subturbine Series

The 6TMH pump series features abrasion and corrosion resistant materials for maximum performance and longevity under the toughest operating conditions, and delivers industry-leading efficiencies and head per stage

Key Features
  • Factory pre-set upthrust screw is retained by a stainless steel lockout, providing maximum upthrust protection
  • Threaded discharge with large wrench flats and sized for the pump’s flow range
  • Low friction discharge bearing, no water swell, long life. Specific for water-immersed applications, clean or dirty
  • Precision ground and polished shaft for reduced running friction and increased service life
  • Smooth and efficient impeller provides performance and long life
  • Heavy-walled bowls incorporate precision hydraulic design for maximum efficiency and performance.
  • Lead guard protects the motor leads across the full length of the pump
  • Uniquely designed isolator bearings channel abrasives away from the stainless steel shaft bearing journal
  • Suction bracket machined for both 4” and 6” motor registers. Designed to effectively divert debris away from the spline engagement area, maximizing durability
  • Form fitted suction screen provides corrosion resistance, and prevents particulates larger than .19” (4.8 mm) from entering the pump
  • Fully machined motor coupling for positive fit; highly corrosion resistant
  • Sand boot protects coupling and motor splines from abrasive wear

Performance

-----------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model 5TMH

5TMH Subturbine Series

The 5TMH pump series features abrasion and corrosion resistant materials for maximum performance and longevity under the toughest operating conditions, and delivers industry-leading efficiencies and head per stage. The 5TMH series consists of five new hydraulic designs for well casings with an ID smaller than 6".

Key Features
  • Factory pre-set upthrust screw is retained by a stainless steel lockout, providing maximum upthrust protection
  • Threaded discharge with large wrench flats and sized for the pump’s flow range
  • Low friction discharge bearing, no water swell, long life. Specific for water-immersed applications, clean or dirty
  • Precision ground and polished shaft for reduced running friction and increased service life
  • Smooth and efficient impeller provides performance and long life
  • Heavy-walled bowls incorporate precision hydraulic design for maximum efficiency and performance.
  • Lead guard protects the motor leads across the full length of the pump
  • Uniquely designed isolator bearings channel abrasives away from the stainless steel shaft bearing journal
  • Suction bracket machined for both 4” and 6” motor registers. Designed to effectively divert debris away from the spline engagement area, maximizing durability
  • Form fitted suction screen provides corrosion resistance, and prevents particulates larger than .19” (4.8 mm) from entering the pump
  • Fully machined motor coupling for positive fit; highly corrosion resistant
  • Sand boot protects coupling and motor splines from abrasive wear

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

6TS Stainless Steel Subturbine Series

6TS Series Pumps feature heavy-duty 304 stainless steel construction and hard chrome wear surfaces that will outperform ordinary fabricated stainless steel pumps in aggressive water conditions.  The state-of-the-art design includes 100% lead-free components with high efficiency performance in 6 hydraulics up to 400 GPM and 60 HP

(100% lead-free components meet all U.S. Federal guidelines for safe drinking water)

Key Features
  • Heavy-Duty, Investment Cast 304 Stainless Steel Discharge assures secure connection to drop pipe.  Wrench flats provide positive grip during installation.
  • Built-In Check Valve (optional) prevents backflow and reverse rotation
  • Hard Chrome-Plated Top Bearing Journal reduces abrasive wear in harsh sandy well conditions
  • Self-Aligning Teflon® Wear Rings improve pump efficiency and durability
  • Low-Profile Stainless Steel Lead Guard aids installation in narrow wells
  • Built-In Up-Thrust Protection protects pump during periods of high demand and start-up preventing pump failure
  • 304 Stainless Steel Inlet Screen and Internal Coupling Screen prevents entry of abrasives into pump and coupling areas
  • Heavy-Duty Investment Cast 304 Stainless Steel Suction Bracket assures perfect pump-to-motor alignment with any NEMA standard submersible motor
Warranty

12 months from date of original installation, or 24 months from date of manufacture

Performance

-----------------------------------------------------------------------------------------------------------------------------------------------------

 

 

6TSP Stainless Steel Subturbine Series

The 6TSP series pumps feature abrasion and corrosion resistant materials for maximum performance and longevity under the toughest operating conditions.

Components are 100% lead-free, and meet all U.S. federal guidelines for safe drinking water.

Key Features
  • Discharge – investment cast, 3” FNPT Features 6 extra wide wrench flats for a secure grip when tightening to the drop pipe.
  • Standard Check valve – The poppet-style check valve helps protect the pump against backflow. The check valve can be easily removed if not required.
  • Shaft and bearing assembly – A ceramic upper bearing guide combined with a cutless rubber bearing protects the shaft from premature wear.
  • Impellers and diffusers – Smooth and efficient performance, and superior sand handling.
  • Wear rings – 304 Minimizes re-circulation for increased pump performance and longevity.
  • Pump sleeve – Provides superior corrosion resistance when the pump is installed in harsh environments.
  • Lead guard – Easy installation, and protects the motor leads across the full length of the pump.
  • Suction bracket – Machined for both 4” and 6” motor registers. Bolt kits included for either motor size where appropriate.
  • Suction screen – Form fitted, provides corrosion resistance, and prevents particulates larger than 0.10” from entering the pump.
  • Motor Coupling – Designed to effectively divert debris away from the spline engagement area to maximize durability.
 

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

8T Subturbine Series

These 8T Series Pumps are proven performers for a wide range of municipal and agricultural applications.  Pumps features Epoxy Coated Bowls, Bronze Impellers and Bearings to provide efficiencies in the 80% plus range.  Four 8T series  models assure the right pump for your particular installation.

Key Features
  • Heavy-Duty Discharge Adapter made of Class 30 Cast Iron includes a top bronze thrust bearing.  Threaded discharge is sized for the pump's flow range.  Factory-set thrust screw, retained by a stainless steel lockout, provides maximum upthrust protection
  • Heavy-Walled Class 30 Cast Iron Bowls incorporate precise hydraulic design for maximum efficiency and performance.  Positive "Bowl Lock" feature on 8T-950 eliminates risk of bowl loosening
  • Bronze Impellers are designed and machined to optimize efficiency and performance
  • Bronze Bearings maintain positive shaft alignment, minimizing sand penetration and wear
  • Wear Ring (on 8T-950) enables pump to be re-built to maintain original factory performance
  • Non-Corrosive Sand Cap protects bronze suction bracket bearing and stainless steel bearing journal
  • 416 Stainless Steel Pump Shaft is precision-ground & polished for reduced running friction & increased service life
  • Heavy-Duty Stainless Steel Suction Strainer is non-collapsible and corrosion-resistant
  • Heavy-Duty Cast Iron Suction Bracket assures perfect pump-to-motor alignment with NEMA standard motors
  • Low Profile, Full-Length Stainless Steel Cable Guard (not shown) protects motor leads
Warranty

12 months from date of original installation, or 24 months from date of manufacture

Performance

------------------------------------------------------------------------------------------------------------------------------------------------------

 

10T Subturbine Series

The 10T Series Pumps are proven performers for a wide range of municipal and agricultural applications.  Pumps feature Epoxy Coated Bowls, Bronze Impellers and Bearings to provide efficiencies in 80% plus range.  Five 10T series models assure the right pump for your particular installation.

Key Features
  • Heavy-Duty Discharge Adapter is Class 30 cast iron and includes a bronze top bearing and stainless steel journal.  Threaded discharge is sized for the pump's flow range.  Factory-set thrust screw, retained by a stainless steel lockout, provides maximum upthrust protection
  • Heavy-Walled Class 30 Cast Iron Bowls incorporate precise hydraulic design for maximum efficiency and performance.  Positive "Bowl Lock" feature eliminates risk of bowl loosening
  • Bronze Impeller is designed and machined to optimize efficiency and performance
  • Bronze Bearings maintain positive shaft alignment, minimizing sand penetration and wear
  • Wear Rings enable pumps to be re-built to maintain original factory performance
  • Non-Corrosive Sand Cap protects bronze suction bracket bearing and stainless steel bearing journal
  • 416 Stainless Steel Pump Shaft is precision ground & polished for reduced running friction & increased service life
  • Heavy-Duty Cast Iron Suction Strainer is non-collapsible and corrosion-resistant
  • Heavy-Duty Cast Iron Suction Bracket assures perfect pump-to-motor alignment with NEMA standard motors
  • Low Profile, Full-Length Stainless Steel Cable Guard (not shown) protects motor leads
Warranty

12 months from date of original installation, or 24 months from date of manufacture

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

Pentek® VIP Pro Series Controls

Capacitor start, capacitor run — designed for the full range of single-phase 1/2, 3/4, 1, 1-1/2, 2, 3 and 5 HP, 3-wire submersible motors

Key Features
  • 330 Volt Made in the USA capacitors
  • Pentek proprietary dielectric control panel board, UL and CSA Certified
  • Control box rated for 50°C (120°F) ambient temperature
  • Universal controls‑ designed to work on all manufacturers 3-wire submersible motors
  • Large wiring area offers generous space to make your wiring connections. Incorporates 1/2”, 3/4” and 1” conduit knock-outs
  • Weather resistant construction – NEMA 3R/IP24 rated enclosure for indoor/ outdoor use
  • Through-the-cover reset overload protection on 1-1/2 through 5 HP models
  • Control box is functional with the cover removed, offering easier in-the-field troubleshooting

-------------------------------------------------------------------------------------------------------------------------------------------------------

 

Pentek® Tri-Larm™ with Link2O™

With the Tri-Larm looking after your home, you can be at ease knowing wherever you are you will be informed of a potential problem.

Key Features

Detects Leaks

Place the Tri-Larm in your basement, next to your washing machine, under the sink or anywhere a leak could occur. Combine the audible alarm with text and email alerts and the Tri-Larm will keep you informed of potential problems whether you are home or away.

Freeze Detector

The Tri-Larm will detect a drop in temperature and notify you of the possibility of frozen pipes.

Power Loss

Tri-Larm alerts you if your power goes out. You’ll know:

  • When your sump pump is not running
  • How long other appliances have been without power

NOTE: Tri-Larm requires a gateway to connect to the internet. If a gateway from another Link2O product is already installed, a second gateway is not needed.

------------------------------------------------------------------------------------------------------------------------------------------------------

 

Pentek Intellidrive™ XL Variable Frequency Drive

Pentek Intellidrive™ XL, the latest addition to our line of our variable frequency drives, is designed for large horsepower pumping applications. Selection is easy. Setup is simple. And you have powerful opportunities to customize as needs arise. All backed by expert, dedicated tech support, available to quickly and efficiently resolve any issues.
Key Features
  • Selection is easy
  • Simple setup
  • More ways to customize
  • Dedicated tech support

Increase Your Pressure!

The Pentek Intellidrive™ Water Pressure Control Center automatically adjusts motor speeds to meet changes in water demand and maintain constant pressure throughout the system.

------------------------------------------------------------------------------------------------------------------------------------------------------

 

Pentek Intellikit™ Pre-Specified and Packaged Constant Pressure Systems

The Pentek Intellikit™ Constant Pressure Controller automatically adjusts motor speeds to meet changes in water demand. Instantaneous feedback from an electronic pressure transducer instructs the drive to change the submersible well pump motor speed to maintain constant pressure throughout the system.

Key Features
  • Maintain constant water pressure for submersible well pump systems, similar to municipal water systems 
  • Pentek® Submersible Motor
  • Berkeley® Submersible Pump
  • Pentek Intellidrive™ Variable Frequency Drive

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
 
Model PID10, PID20, PID30, PID50

Pentek Intellidrive™ Variable Frequency Drive

Homeowners with water pressure problems experience weak showers, unclean dishes, dry lawns and more. The Pentek Intellidrive™ Water Pressure Control Center is an “Intelligent Variable Frequency Drive” that directs changes in submersible pump motor speed, responding to fluctuations in household demand. It maintains constant water pressure, regardless of how many people or appliances are using water at the same time.

The Pentek Intellidrive is available with Link2O™ technology that provides you with instant access to your drive and notifications to alert you of any faults. Find out more at www.mylink2o.com!

We publish updates for the internal software on a regular basis

CHECK FOR SOFTWARE UPDATE HERE

Key Features
  • Fully Programmable Drive – Easily programmable for a variety of applications and specific settings.
  • 34 Adjustable Programming Parameters – Provides ultimate flexibility to fine-tune system operation.
  • EMI/RFI Filters – Eliminate potential interference.
  • Removable/Replaceable Terminal Blocks – For easy wiring of motor and power supply.
  • Best In Class Lightning Protection.

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model VFD-ALT

Pentek® Alternating Control Panel for the Pentek Intellidrive™

The Alternating Panel is designed to equalize wear on the pumps by alternating two Pentek Intellidrive™ Variable Frequency Drives every 24 hours. This panel alternates which pump is the lead and lag in a duplex system. It can also be used independently of the lead/lag function.

Key Features
  • Power On Indicator
  • Pump 1 Enabled Indicator
  • Pump 2 Enabled Indicator
  • Alternate/Off Switch

Increase Your Pressure!

The Pentek Intellidrive™ Water Pressure Control Center automatically adjusts motor speeds to meet changes in water demand and maintain constant pressure throughout the system.

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model VFD-WS

Pentek® VFD Pump Shut Down Moisture Sensor

The Moisture Sensor is designed to shut off your Pentek Intellidrive™ if water is detected. When water touches the two detection points on the bottom of the Moisture Sensor, it sends a signal to the VFD to shut it off.

Key Features
  • Detects water At 1/16"
  • Waterproof epoxy encapsulated enclosure
  • Indicators for alarm condition and ready condition
  • Auto reset

------------------------------------------------------------------------------------------------------------------------------------------------------

 

 
Model VFD-SGA, VFD-SGA-LN, VFD-SGA-LD

Pentek® Surge Arrestor Kits

Surge protection device for use with the Pentek Intellidrive™. Line side arrestor easily installed in the circuit breaker. LED Diagnostic lights help provide positive indication of power, grounding presence and surge protection.

Key Features
  • Compact size to fit most applications
  • Diagnostic LEDs to indicate system power & surge protection
  • Weatherproof design allows for use in most environments
  • Service Voltage: 120/240 VAC (line side);240VAC (Load side)
  • UL and cUL Listed arresters
  • Parallel connection for easy installation
  • Auto reset to handle multiple surges

------------------------------------------------------------------------------------------------------------------------------------------------------

 

Pentek® Control Box Series

Pentek® offers a full range of 1/2 - 15 HP models that are interchangeable with existing motor controls for Capacitor Start/Induction Run (CSIR) and Capacitor Start/Capacitor Run (CSCR) applications. Pentek is the professional choice in harsh and high temperature installations.

  • CSIR - Capacitor Start/Indication Run
  • CSCR - Capacitor Start/Capacitor Run
  • CSCR PLUS - Capacitor Start/Capacitor Run PLUS Magnetic Contactor
Key Features
  • Rugged NEMA 3R enclosure suitable for indoor/outdoor use
  • HardBond finish is 5-times more corrosion-resistant
  • Multiple-size electrical knockouts
  • High-load voltage relay
  • Heavy-duty contacts
  • External access to overload reset on CSCR boxes
  • Heavy-duty terminal connectors are suitable for up to #4 AWG wire
  • Easy-to-read wiring diagrams

------------------------------------------------------------------------------------------------------------------------------------------------------

 

Pentek® CSIR Single-Phase Protector Series

Pentek® offers a full range of 1/3 - 15 HP single-phase protectors for residential, commercial, multiple housing and farm water systems applications where a 4" submersible, 2- and 3-wire motor is used and for aboveground pressure-boost applications.

Key Features
  • Pentek offers 5 models for your application needs based on HP and Motor Type: SPP-111, SPP-111-3RL, SPP-231, SPP-233 and SPP-235.
  • Protects Pumps – from dry well, overcurrent (jammed impeller), flow restriction (dead head), overvoltage, undervoltage, rapid cycling.
Warranty
1-year limited warranty
 
------------------------------------------------------------------------------------------------------------------------------------------------------
 
 
 

The Pentek® Informer - Remote Diagnostic Tool for Pentek Pump Protectors

A remote handheld diagnostic tool designed for use with Pentek® single-phase pump protectors (models SPP-231, SPP-233, and SPP-235) equipped with infrared LED transmitters

Key Features
  • Infrared receiver to get data from the SPP
  • Allows remote troubleshooting of system
  • Receives both past and present data and displays in on-screen
  • Green COMM STATUS light indicates when The Informer is receiving data
  • Holds the last values received if communication is broken with the SPP
Warranty
1 year limited warranty
 
------------------------------------------------------------------------------------------------------------------------------------------------------