BJM 201530, SV Series, Model SV400-230, Solids Handling Pump, 1/2 HP, 230 Volts, 1 Phase, 3450 RPM, 2" NPT Discharge, 59 GPM Max., 22 ft. Max. Head, Cast Iron, 33 ft. Cord
SKU #: 201530
Brand: BJM
Available For Order! ((Usually Ships 3-5 Days))This product is direct shipped from the manufacturer to our distribution center where it is checked, packaged and processed by our quality control team. The shipping time shown is the estimated number of business days the product will ship out from our wa
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
BJM PUMP SV-Series
The SV-pump is equipped with Vortex impeller, undoubtedly the best non-clog impeller ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. The SV pump can pass solid up to 90% of pump outlet diameter.
Features:
- Longer power cord, 33 ft. power cord on pumps ½ HP and below and 50ft. on pump 1 HP and above
- 304SS motor housing is abrasion resistance and will not wear out like aluminium motor housing when pumping sandy water
- Three seal motor protection, motor is protected by double mechanical seals
- Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic
- Lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber
- Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pump with Class A and B insulation
- Automatic switch turns pump motor off if temperature and/or amp draw raises too high
- When the motor cools the switch will automatically reset and the pump will turn back on
- Cast iron construction stands up to rough handling and pumping sandy water unlike pump with soft resin impeller or plastic exterior components due to the pumps tough construction
Applications
- Sludge
- Sewage
- Trash
- Industrial Waste
Brand | SV series |
Mfg. Number | Electric Submersible Pump |
Model | Non Clog Vortex |
Product Type | STOW |
Horsepower | 3.8 Amp |
Series | Sewage, Trash and Industrial Waste |
Connection | 1/2 HP |
Voltage | 1.5" |
Phase | 22 ft |
Product Type | 230 Volts |
Application | 1 |
Output KW | 59 GPM |
NEMA Size | 3450 RPM |
Frequency | Cast iron |
RPM | 304 Stainless Steel |
Shaft Seal Type | 104°F |
Stages | 2" NPT-M |
Construction Material | 65 ft |
Impeller Material | 10.5" |
Bearing | 304 Stainless Steel |
Motor Standard | Cast iron |
Max. Water Temperature | Buna-N |
Suction | 304 Stainless Steel |
Discharge | BJM |
Maximum Total Head | SV400-230 |
Maximum Flow | SV400-230 |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*