BJM 201532, SV Series, Model SV750C-115, Solids Handling Pump, 1 HP, 115 Volts, 1 Phase, 3450 RPM, 3" NPT Discharge, 100 GPM Max., 31.5 ft. Max. Head, Cast Iron, 33 ft. Cord

FEATURES

BJM PUMP SV-Series

The SV-pump is equipped with Vortex impeller, undoubtedly the best non-clog impeller ever invented for the handling of mud, raw sewage, viscous liquids, rags, wood chips and other solids. The SV pump can pass solid up to 90% of pump outlet diameter.

Features:

• Longer power cord, 33 ft.  power cord on pumps ½ HP and below and 50ft. on pump 1 HP and above
• 304SS motor housing  is abrasion resistance and will not wear out like aluminium motor housing when pumping sandy water
• Three seal motor protection, motor is protected by double mechanical seals
•  Lower seal made of silicon carbide/silicon carbide and upper seal is made of carbon/ceramic
• Lip seal has been installed above the impeller, to help prevent abrasives such as dirt, silt or sand, from entering into the seal chamber
• Winding protection and (NEMA) Class F motor insulation allows motor temperature to raise to 230°F, superior to pump with Class A and B insulation
• Automatic switch turns pump motor off if temperature and/or amp draw raises too high
• When the motor cools the switch will automatically reset and the pump will turn back on
• Cast iron construction stands up to rough handling and pumping sandy water unlike pump with soft resin impeller or plastic exterior components due to the pumps tough construction

Applications

• Sludge
• Sewage
• Trash
• Industrial Waste