Page not found - PumpProducts.com
  • Goulds 3SD and 4SD Series Sewage Pumps at PumpProducts.com: Elevate Your Wastewater M...

    March 28, 2024

    PumpProducts.com is proud to feature the Goulds 3SD and 4SD Sewage Pumps, a robust solution engineered for commercial and industrial-level wastewater challenges. These high-capacity submersible pumps are designed with precision to ensure reliable and efficient operation across a wide array of demanding environments. From handling the intricate needs of hospitals and motels to the rugged demands of farms and trailer courts, the 3SD and 4SD series stand as a testament to advanced engineering in wastewater management. Designed for Durability and Performance The Goulds 3SD and 4SD series are not just any sewage pumps; they are crafted to offer maximum capacity handling, reaching into the three digits, and built tough to sustain those numbers. These pumps are ideally suited for critical applications, including flood and pollution control, general sewage systems, dewatering, and effluent applications. Advanced Sealing for Maximum Protection At the heart of these pumps lies a dual seal system, featuring an outer silicon carbide vs. silicon carbide and an inner ceramic vs. carbon seal, providing an additional layer of protection. Coupled with a seal sensor probe to detect seal penetration, these pumps are fortified against leaks, ensuring long-lasting performance. Non-Clog Impeller and Rugged Construction Each pump in the series boasts a two-vane, semi-open, non-clog impeller with pump-out vanes designed to fend off blockages, ensuring smooth operation. The entire pump – from the cast iron volute to the 300 series stainless shaft and fasteners – embodies durability, capable of running dry without sustaining damage to its components. Tailored to Your Needs The distinction between the 3SD and 4SD series lies in their solids handling capabilities and discharge sizes, making each series suitable for specific requirements: 3SD pumps are capable of passing 2.5" waste solids through a 3" NPT horizontal discharge. 4SD pumps elevate this capability, allowing for 3" solids to pass through a 4" NPT horizontal discharge. Select 4SD models also feature powerful 7 HP motors for even more demanding applications. Each model is manually operated and comes equipped with a 20 ft. power cord, ensuring flexibility and ease of installation across various setups. Why Choose Goulds 3SD and 4SD Series at PumpProducts.com Choosing the Goulds 3SD and 4SD Sewage Pumps from PumpProducts.com means investing in reliability, efficiency, and durability for your wastewater management system. These pumps are designed not just to meet but exceed the rigorous demands of commercial and industrial applications, providing peace of mind with their advanced features and robust construction. Visit PumpProducts.com today to explore our selection of Goulds 3SD and 4SD Sewage Pumps and elevate your wastewater management strategy with solutions that stand the test of time and challenge. Model Comparison Chart Model Discharge HP Voltage Phase GPM Max. Head 3SD52F1DA 3" Fl. H 1.5 230 1 322 38' 3SD52F1EA 3" Fl. H 1.5 230 1 232 20' 3SD52F8EA 3" Fl. H 1.5 208 1 232 20' 3SD52F8DA 3" Fl. H 1.5 208 1 322 38' 3SD52F4EA 3" Fl. H 1.5 460 3 232 20' 3SD52F3DA 3" Fl. H 1.5 230 3 322 38' 3SD52F4DA 3" Fl. H 1.5 460 3 322 38' 3SD52F3EA 3" Fl. H 1.5 230 3 232 20' 3SD52F2EA 3" Fl. H 1.5 200 3 232 20' 3SD52F2DA 3" Fl. H 1.5 200 3 322 38' 3SD52G3CA 3" Fl. H 2 230 3 368 45' 3SD52G4CA 3" Fl. H 2 460 3 368 45' 3SD52G2CA 3" Fl. H 2 200 3 368 45' 3SD52G1CA 3" Fl. H 2 230 1 368 45' 3SD52G8CA 3" Fl. H 2 208 1 368 45' 3SD52H4BA 3" Fl. H 3 460 3 399 54' 3SD52H3BA 3" Fl. H 3 230 3 399 54' 3SD52H2BA 3" Fl. H 3 200 3 399 54' 3SD52J3AA 3" Fl. H 5 230 3 470 65' 3SD52J4AA 3" Fl. H 5 460 3 470 65' 3SD52J2AA 3" Fl. H 5 200 3 470 65' 3SD52H1BA 3" Fl. H 3 230 1 399 54' 3SD52H8BA 3" Fl. H 3 208 1 399 54' 3SD52J1AA 3" Fl. H 5 230 1 470 65' 4SD52F1DA 4" Fl. H 1.5 230 1 400 31' 4SD52F1EA 4" Fl. H 1.5 230 1 345 20' 4SD52F8EA 4" Fl. H 1.5 208 1 345 20' 4SD52F8DA 4" Fl. H 1.5 208 1 400 31' 4SD52F4EA 4" Fl. H 1.5 460 3 345 20' 4SD52F3EA 4" Fl. H 1.5 230 3 345 20' 4SD52F4DA 4" Fl. H 1.5 460 3 400 31' 4SD52F2EA 4" Fl. H 1.5 200 3 345 20' 4SD52F2DA 4" Fl. H 1.5 200 3 400 31' 4SD52G4CA 4" Fl. H 2 460 3 432 37' 4SD52G3CA 4" Fl. H 2 230 3 432 37' 4SD52G2CA 4" Fl. H 2 200 3 432 37' 4SD52G1CA 4" Fl. H 2 230 1 432 37' 4SD52G8CA 4" Fl. H 2 208 1 432 37' 4SD52H4BA 4" Fl. H 3 460 3 485 46' 4SD52H3BA 4" Fl. H 3 230 3 485 46' 4SD52H2BA 4" Fl. H 3 200 3 485 46' 4SD52J3AA 4" Fl. H 5 230 3 550 51' 4SD52J4AA 4" Fl. H 5 460 3 550 51' 4SD52J2AA 4" Fl. H 5 200 3 550 51' 4SD52H1BA 4" Fl. H 3 230 1 485 46' 4SD52H8BA 4" Fl. H 3 208 1 485 46' 4SD52J1AA 4" Fl. H 5 230 1 550 51' 4SD52K4FA 4" Fl. H 7.5 460 3 620 60' 4SD52K3FA 4" Fl. H 7.5 460 3 620 60'

    VIEW
  • Introducing the Robust Goulds 2WD and 3WD Non-Clog Sewage Pumps Series at PumpProduct...

    March 28, 2024

    PumpProducts.com carries the Goulds 2WD and 3WD non-clog sewage pumps series, which is just a small part of our comprehensive range of wastewater management solutions. Designed to tackle the most demanding tasks in wastewater transport, effluent transport, and dewatering applications, these series are the go-to choice for commercial and light industrial environments. Engineered for Efficiency and Durability Both the 2WD and 3WD series embody the engineering excellence synonymous with Goulds, featuring heavy-duty construction that effortlessly handles up to 2" diameter non-abrasive solids. The volutes, crafted from flanged cast iron, ensure not only durability but also seamless integration with the A10-20 guide rail system for easy installation and maintenance. Optimal Impeller Design Customers have the option to choose between semi-open or enclosed impeller types, depending on their specific needs. Each cast iron impeller is meticulously designed to prevent clogging, incorporating pump-out vanes that efficiently divert solids away from the mechanical seal. This innovative design guarantees uninterrupted operation even in the most challenging conditions. Advanced Sealing Technology The dual construction seal system is a testament to the pumps' sophisticated design, offering unmatched protection against leakage and seal failure. The lower seal is equipped with silicon carbide faces, known for their durability and resistance to wear, while the upper seal features carbon vs. ceramic faces for reliable sealing. Stainless steel metal parts and BUNA-N elastomers encase the seal faces, enhancing their longevity and performance. Moreover, a seal sensor probe provides immediate alerts in case of seal leakage or failure, ensuring prompt maintenance actions to avoid downtime. Tailored Discharge Options Understanding the varied requirements of wastewater management systems, the 2WD and 3WD series offer different discharge sizes to accommodate specific flow rates and system configurations. The 2WD series comes with a 2" NPT flanged horizontal discharge, ideal for standard applications, while the 3WD series boasts a 3" NPT flanged discharge for higher volume needs. Your Solution for Commercial/Light Industrial Wastewater Needs Whether you are dealing with wastewater transport, effluent, or dewatering applications, the Goulds 2WD and 3WD series at PumpProducts.com provide a reliable, efficient, and durable solution. Each model, manually operated and equipped with a 20 ft. power cord, is designed to meet the rigorous demands of commercial and light industrial environments, ensuring your wastewater management system operates at peak efficiency. Choose the Goulds 2WD and 3WD non-clog sewage pumps series for their robust construction, advanced sealing technology, and versatile discharge options. Visit PumpProducts.com today to find the perfect pump for your application and elevate your wastewater management system with confidence. Model Comparison Chart Model Discharge Horsepower Voltage Phase GPM Max. Head 2WD52B0EA 2" NPT Flange 1/3 115 1 105 19' 2WD52B1EA 2" NPT Flange 1/3 230 1 105 19' 2WD51B0KA 2" NPT Flange 1/3 115 1 118 22' 2WD51B1KA 2" NPT Flange 1/3 230 1 118 22' 2WD52B8EA 2" NPT Flange 1/3 208 1 105 19' 2WD51B8KA 2" NPT Flange 1/3 208 1 118 22' 2WD52C0DA 2" NPT Flange 1/2 115 1 160 26' 2WD52C1DA 2" NPT Flange 1/2 230 1 160 26' 2WD51C0JA 2" NPT Flange 1/2 115 1 122 29' 2WD51C1JA 2" NPT Flange 1/2 230 1 122 29' 2WD52C8DA 2" NPT Flange 1/2 208 1 160 26' 2WD51C8JA 2" NPT Flange 1/2 208 1 122 29' 2WD52C4DA 2" NPT Flange 1/2 460 3 160 26' 2WD52C3DA 2" NPT Flange 1/2 230 3 160 26' 2WD51C3JA 2" NPT Flange 1/2 230 3 122 29' 2WD51C4JA 2" NPT Flange 1/2 460 3 122 29' 2WD52C2DA 2" NPT Flange 1/2 200 3 160 26' 2WD51C2JA 2" NPT Flange 1/2 200 3 122 29' 2WD52D4CA 2" NPT Flange 3/4 460 3 169 31' 2WD52D1CA 2" NPT Flange 3/4 230 1 169 31' 2WD52D3CA 2" NPT Flange 3/4 230 3 169 31' 2WD51D4HA 2" NPT Flange 3/4 460 3 140 39' 2WD51D1HA 2" NPT Flange 3/4 230 1 140 39' 2WD51D3HA 2" NPT Flange 3/4 230 3 140 39' 2WD52D8CA 2" NPT Flange 3/4 208 1 169 31' 2WD52D2CA 2" NPT Flange 3/4 200 3 169 31' 2WD52E4BA 2" NPT Flange 1 460 3 183 38' 2WD52E1BA 2" NPT Flange 1 230 1 183 38' 2WD52E3BA 2" NPT Flange 1 230 3 183 38' 2WD51D8HA 2" NPT Flange 3/4 208 1 140 39' 2WD51D2HA 2" NPT Flange 3/4 200 3 140 39' 2WD52E8BA 2" NPT Flange 1 208 1 183 38 2WD52E2BA 2" NPT Flange 1 200 3 183 38 2WD51E4AA 2" NPT Flange 1 460 3 171 52 2WD51E1AA 2" NPT Flange 1 230 1 171 52 2WD51E3AA 2" NPT Flange 1 230 3 171 52 2WD51E2AA 2" NPT Flange 1 200 3 171 52 2WD51E8AA 2" NPT Flange 1 208 1 171 52 3WD52B0EA 3" NPT Flange 1/3 115 1 105 19' 3WD52B1EA 3" NPT Flange 1/3 230 1 105 19' 3WD51B1KA 3" NPT Flange 1/3 230 1 118 22' 3WD52B8EA 3" NPT Flange 1/3 208 1 105 19' 3WD51B8KA 3" NPT Flange 1/3 208 1 118 22' 3WD52C0DA 3" NPT Flange 1/2 115 1 160 26' 3WD52C1DA 3" NPT Flange 1/2 230 1 160 26' 3WD51C0JA 3" NPT Flange 1/2 115 1 122 29' 3WD52C8DA 3" NPT Flange 1/2 208 1 160 26' 3WD51C8JA 3" NPT Flange 1/2 208 1 122 29' 3WD52C3DA 3" NPT Flange 1/2 230 3 160 26' 3WD52C4DA 3" NPT Flange 1/2 460 3 160 26' 3WD51C3JA 3" NPT Flange 1/2 230 3 122 29' 3WD51C4JA 3" NPT Flange 1/2 460 3 122 29' 3WD52C2DA 3" NPT Flange 1/2 200 3 160 26' 3WD51C2JA 3" NPT Flange 1/2 200 3 122 29' 3WD51C1JA 3" NPT Flange 1/2 230 1 122 29' 3WD52D4CA 3" NPT Flange 3/4 460 3 169 31' 3WD52D1CA 3" NPT Flange 3/4 230 1 169 31' 3WD52D3CA 3" NPT Flange 3/4 230 3 169 31' 3WD51D4HA 3" NPT Flange 3/4 460 3 140 39' 3WD51D1HA 3" NPT Flange 3/4 230 1 140 39' 3WD51D3HA 3" NPT Flange 3/4 230 3 140 39' 3WD52D2CA 3" NPT Flange 3/4 200 3 169 31' 3WD52E4BA 3" NPT Flange 1 460 3 183 38' 3WD52E1BA 3" NPT Flange 1 230 1 183 38' 3WD52E3BA 3" NPT Flange 1 230 3 183 38' 3WD51D8HA 3" NPT Flange 3/4 208 1 140 39' 3WD51D2HA 3" NPT Flange 3/4 200 3 140 39' 3WD52D8CA 3" NPT Flange 3/4 208 1 169 31' 3WD52E8BA 3" NPT Flange 1 208 1 183 38' 3WD52E2BA 3" NPT Flange 1 200 3 183 38' 3WD51E4AA 3" NPT Flange 1 460 3 171 52' 3WD51E1AA 3" NPT Flange 1 230 1 171 52' 3WD51E3AA 3" NPT Flange 1 230 3 171 52' 3WD51E2AA 3" NPT Flange 1 200 3 171 52' 3WD51E8AA 3" NPT Flange 1 208 1 171 52'

    VIEW
  • Unveiling the Efficiency of Goulds 1DV & 2DV Submersible Vortex Sewage Pumps

    March 28, 2024

    In the complex world of wastewater management, selecting the right pump is crucial for ensuring efficient and reliable operation. The Goulds 1DV and 2DV series submersible vortex sewage pumps stand out as prime candidates for a variety of demanding applications. Engineered with precision, these pumps cater to simplex and duplex installations in small lift stations, drainage systems, or raw water applications, boasting solids handling capabilities of 1 3/8" and 2" in diameter. Let's dive deeper into the features and applications of these robust sewage pumps, available at PumpProducts.com. Robust Design for Diverse Applications The 1DV/2DV series is not just another addition to the market; it is a specially designed solution for: Industrial Treatment Systems: Providing reliable operation in demanding industrial environments. Mobile Home Parks and Motels: Ensuring uninterrupted service for residential complexes. Municipal Package Systems: Enhancing the efficiency of municipal wastewater management. Schools and Hospitals: Catering to the critical needs of public institutions with high reliability. This range of applications highlights the versatility and reliability of the 1DV and 2DV series, making them a go-to choice for professionals in the field. Product Features That Make a Difference Discharge Options: Available with 1 1/2 and 2" discharge for models starting from 1/2 and 3/4 hp, accommodating various installation requirements. Solid Size Handling: Capable of handling 1 3/8" solids for the 1/2 HP model and 2" solids for 3/4 HP models and larger, making them ideal for a wide range of wastewater applications. Material Construction: The AISI 304 SS casing and impeller offer durability and corrosion resistance, ensuring long service life. High Capacities: With capacities up to 130 U.S. GPM, these pumps can handle significant volumes of wastewater efficiently. Continuous Duty Rated Motor: Designed for continuous operation without risk of overload, providing peace of mind in critical applications. Vortex Design Impeller: The AISI type 304 SS impeller with vortex design minimizes clogging and allows for smooth, uninterrupted operation. Impressive Head Capabilities: Capable of achieving total heads up to 39 feet, these pumps are suited for a variety of discharge heights. Applications Spanning Various Sectors Whether it's for dewatering applications, serving homes and farms, or operating within industrial, municipal, or educational settings, the 1DV and 2DV series pumps are engineered to deliver. Their robust design ensures reliable performance across a spectrum of wastewater management tasks, from basic dewatering to handling sewage in mobile home parks and motels, and from municipal package systems to critical applications in schools and hospitals. Conclusion: A Versatile Solution for Wastewater Management The Goulds 1DV and 2DV series submersible vortex sewage pumps offer a compelling blend of performance, durability, and versatility. Designed to meet the rigorous demands of residential, municipal, and industrial wastewater applications, these pumps represent a reliable solution for efficient sewage handling. With their advanced features and broad application spectrum, the 1DV and 2DV series, available at PumpProducts.com, stand ready to tackle the challenges of wastewater management head-on, ensuring operational efficiency and reliability. Incorporate the Goulds 1DV and 2DV series pumps into your wastewater management strategy and experience a new level of reliability and efficiency. Model Comparison Chart Model Series HP Volts Phase Discharge Max GPM Max Head (ft) Cord Length (ft) Operation Type 1DV51C1VA 1DV 1/2 230 1 1-1/2" NPT 67 25 20 Manual 2DV51D3VA 2DV 3/4 230 3 2" NPT 92 24 20 Manual 2DV51D4VA 2DV 3/4 460 3 2" NPT 92 24 20 Manual 2DV51D1VA 2DV 3/4 230 1 2" NPT 92 24 20 Manual 2DV51E3VA 2DV 1 230 3 2" NPT 114 32 20 Manual 2DV51E4VA 2DV 1 460 3 2" NPT 114 32 20 Manual 2DV51E1VA 2DV 1 230 1 2" NPT 114 32 20 Manual 2DV51F3VA 2DV 1-1/2 230 3 2" NPT 132 38 20 Manual 2DV51F4VA 2DV 1-1/2 460 3 2" NPT 132 38 20 Manual

    VIEW
  • Discover the Power and Reliability of Goulds 1DM & 2DM Sewage Pumps

    March 27, 2024

    When it comes to managing wastewater and sewage in various settings, from residential homes to industrial treatment systems, the choice of the right pump is crucial for efficiency, reliability, and longevity. Enter the Goulds 1DM and 2DM series – the epitome of robust, non-clog submersible sewage pumps designed for a wide array of applications, available at PumpProducts.com. Goulds 1DM & 2DM Series: Engineered for Excellence The 1DM and 2DM Sewage Pump Series by Goulds Pumps represent the pinnacle of engineering in sewage pumps, offering unmatched performance in simplex and duplex installations. Whether it's for small lift stations, drainage systems, or raw water applications that demand solids handling capability of 1⅜" and 2" diameter, these pumps stand up to the challenge with ease. Designed for Diverse Applications Homes and Farms: Ideal for residential sewage systems, providing reliable and efficient waste management. Mobile Home Parks and Motels: Ensures seamless sewage handling, maintaining hygiene and comfort for residents and guests. Schools and Hospitals: Offers dependable performance in high-demand settings, ensuring public health and safety. Municipal Package Systems: A perfect fit for community sewage systems, enhancing municipal infrastructure. Industrial Treatment Systems: Supports industrial wastewater treatment processes with its robust solids handling capability. Dewatering Applications: Excellently suited for removing water from flooded areas, construction sites, and more. Key Features of Goulds 1DM & 2DM Sewage Pumps Non-Clog Performance: Designed to handle solids efficiently without clogging, ensuring continuous operation. Submersible Design: Allows for installation in wet wells, minimizing exposure to the elements and reducing maintenance. Solids Handling Capability: Can manage solids of up to 2" in diameter, making it versatile for various sewage and wastewater applications. Simplex and Duplex Installations: Suitable for both single and dual pump setups, accommodating different system capacities and redundancy requirements. Why Choose Goulds 1DM & 2DM Pumps Reliability: Goulds Pumps is a brand synonymous with quality and durability, ensuring that their pumps are built to last. Efficiency: Engineered for optimal performance, these pumps deliver high efficiency, reducing energy consumption and operating costs. Ease of Maintenance: Submersible design not only protects the pump but also simplifies maintenance procedures. Versatility: With their solids handling capabilities, the 1DM and 2DM pumps are versatile enough to be used in a variety of applications, from residential to industrial. Conclusion For those in need of a reliable, efficient, and versatile sewage handling solution, the Goulds 1DM and 2DM Series are unmatched choices. Their robust design, combined with the ability to handle solids of significant size, makes them ideal for a wide range of applications. Whether it's for a home, farm, school, hospital, or industrial setting, these pumps promise performance, reliability, and peace of mind. Embrace the superior sewage handling capabilities of Goulds 1DM and 2DM series pumps and experience worry-free operation in any application. With Goulds Pumps and PumpProducts.com, you're not just choosing a pump; you're choosing a lasting solution to your sewage and wastewater management needs. Model Comparison Chart Model Series HP Volts Phase Discharge Max GPM Max Head (ft) Cord Length (ft) Operation Type 2DM51D3NA 2DM 3/4 230 3 2" NPT 131 29 20 Manual 2DM51D4NA 2DM 3/4 460 3 2" NPT 131 29 20 Manual 2DM51D1NA 2DM 3/4 230 1 2" NPT 131 29 20 Manual 2DM51E3NA 2DM 1 230 3 2" NPT 157 40 20 Manual 2DM51E4NA 2DM 1 460 3 2" NPT 157 40 20 Manual 2DM51E1NA 2DM 1 230 1 2" NPT 157 40 20 Manual 2DM51F3NA 2DM 1-1/2 230 3 2" NPT 176 46 20 Manual 2DM51F4NA 2DM 1-1/2 460 3 2" NPT 176 46 20 Manual

    VIEW
  • The Franklin Electric 4NC Series Non-Clog Sewage Pump: The Ultimate Solution to Your ...

    March 27, 2024

    Are you in search of a reliable, efficient, and robust solution for your wastewater management needs Look no further than the Franklin Electric 4NC Series Non-Clog Sewage Pump, now available at PumpProducts.com. This series represents the pinnacle of engineering excellence, designed to tackle the most demanding wastewater transfer applications with ease. Whether you're dealing with sewage, effluent, irrigation, or general dewatering, the 4NC Series has got you covered. Unparalleled Performance and Durability The Franklin Electric 4NC Series Non-Clog Sewage Pump stands out in the market, offering single- and three-phase power options to accommodate diverse operational needs. Capable of delivering flows up to 610 GPM, these pumps are not just powerful but also remarkably efficient. What sets the 4NC Series apart is its commitment to durability and maintenance-friendly design. With a field-adjustable wear plate and factory standard dual silicon carbide mechanical seals, these pumps ensure long-lasting performance with minimal downtime. Features & Benefits That Set the Standard Simplified On-Site Maintenance: The introduction of a field adjustable wear plate eliminates the complexity and additional costs associated with replaceable wear rings. This design innovation ensures easy clearance adjustments between the impeller and volute, significantly reducing operational downtime and enhancing profitability. Extended Seal Life: The 4NC Series comes equipped with dual silicon carbide mechanical seals as a standard feature, offering up to six times the lifespan of traditional carbon versus ceramic seals. These seals boast low thermal expansion and superior abrasion resistance, ensuring a longer operational life for your pump. Advanced Protection Systems: Each pump includes a factory standard exclusion seal, acting as the first line of defense against leaks. Should this seal or the first mechanical seal be compromised, a Seal Fail probe activates, sending an alert signal to the control panel, thereby enabling timely maintenance interventions. Superior Resistance: With a focus on resilience, the motor enclosure sealing system utilizes Fluoroelastomer (FKM) O-Rings, providing enhanced resistance against chemicals and high temperatures. Additionally, the use of powder-coated castings and ductile iron casted impellers adds an extra layer of corrosion resistance, ensuring the pump's longevity even in the harshest conditions. Professional Support: Owning a 4NC Series pump means you have the backing of an industry-leading team of Technical Support and Service professionals, ready to assist with any operational queries or maintenance needs. Key Specifications at a Glance 4" horizontal flange discharge compatible with 125# ANSI flange Capable of handling maximum solids size up to 3" Equipped with 8/4-type SOOW power cable and 16/4-type SOOW sensor cable, available in 30' & 50' lengths Features Class F motor insulation and continuous duty motor for peak performance up to 104 °F Incorporates lower double row ball bearing, 300 series SST motor shaft, seal-fail indication probe, and 300 series SST fasteners for unmatched durability and efficiency. Ideal Applications for Diverse Needs The Franklin Electric 4NC Series Non-Clog Sewage Pump is incredibly versatile, making it suitable for a wide range of commercial and industrial applications. From sewage systems to irrigation projects, effluent management, and general dewatering tasks, this pump series provides a comprehensive solution to meet and exceed your wastewater handling requirements. Elevate Your Wastewater Management with the 4NC Series Embrace the future of wastewater management with the 4NC Series Non-Clog Pump. Available now at PumpProducts.com, this series promises not only to meet your expectations but to surpass them, providing a reliable, efficient, and robust solution for all your wastewater transfer needs. Explore the 4NC Series today and take the first step towards solving your wastewater challenges with confidence and ease! Model Comparison Chart SKU Model Number Voltage (Volts) Power (HP) Current (Amps) Frequency (Hz) Phase Cord Length (ft) Discharge Size RPM 87110382-00 4NC-323P1-170 230 3 24 60 1 30 4" 1750 87110385-00 4NC-323P3-170 200/230 3 16/14 60 3 50 4" 1750 87110388-00 4NC-346P3-170 460 3 7 60 3 30 4" 1750 87110383-00 4NC-323P1-160 230 3 21.5 60 1 30 4" 1750 87110386-00 4NC-323P3-160 200/230 3 13.5/13 60 3 30 4" 1750 87110389-00 4NC-346P3-160 460 3 6.5 60 3 30 4" 1750 87110384-00 4NC-323P1-146 230 3 17.5 60 1 30 4" 1750 87110387-00 4NC-323P3-146 200/230 3 12/11 60 3 30 4" 1750 87110390-00 4NC-346P3-146 460 3 5.5 60 3 30 4" 1750 87110394-00 4NC-523P1-176 230 5 30 60 1 30 4" 1750 87110398-00 4NC-523P3-182 200/230 5 21/17 60 3 30 4" 1750 87110402-00 4NC-546P3-182 460 5 9 60 3 30 4" 1750 87110395-00 4NC-523P1-170 230 5 24 60 1 30 4" 1750 87110399-00 4NC-523P3-170 200/230 5 16/14 60 3 30 4" 1750 87110403-00 4NC-546P3-170 460 5 7 60 3 30 4" 1750 87110397-00 4NC-523P1-146 230 5 17.5 60 1 30 4" 1750 87110382-01 4NC-323P1-170 230 3 24 60 1 50 4" 1750 87110385-01 4NC-323P3-170 200/230 3 16/14 60 3 50 4" 1750 87110388-01 4NC-346P3-170 460 3 7 60 3 50 4" 1750 87110383-01 4NC-323P1-160 230 3 21.5 60 1 50 4" 1750 87110386-01 4NC-323P3-160 200/230 3 13.5/13 60 3 50 4" 1750 87110389-01 4NC-346P3-160 460 3 6.5 60 3 50 4" 1750 87110384-01 4NC-323P1-146 230 3 17.5 60 1 50 4" 1750 87110387-01 4NC-323P3-146 200/230 3 12/11 60 3 50 4" 1750 87110390-01 4NC-346P3-146 460 3 5.5 60 3 50 4" 1750 87110394-01 4NC-523P1-176 230 5 30 60 1 50 4" 1750 87110398-01 4NC-523P3-182 200/230 5 21/17 60 3 50 4" 1750 87110402-01 4NC-546P3-182 460 5 9 60 3 50 4" 1750 87110395-01 4NC-523P1-170 230 5 24 60 1 50 4" 1750 87110399-01 4NC-523P3-170 200/230 5 16/14 60 3 50 4" 1750 87110403-01 4NC-546P3-170 460 5 7 60 3 50 4" 1750 87110396-01 4NC-523P1-160 230 5 21.5 60 1 50 4" 1750 87110397-01 4NC-523P1-146 230 5 17.5 60 1 50 4" 1750 87110410-00 4NC-7523P3-190 200/230 7.5 22/22.5 60 3 30 4" 1750 87110414-00 4NC-7546P3-190 460 7.5 11 60 3 30 4" 1750 87110411-00 4NC-7523P3-182 200/230 7.5 21/21 60 3 30 4" 1750 87110415-00 4NC-7546P3-182 460 7.5 10.5 60 3 30 4" 1750 87110416-00 4NC-7546P3-170 460 7.5 9 60 3 30 4" 1750 87110417-00 4NC-7546P3-160 460 7.5 8 60 3 30 4" 1750 87110410-01 4NC-7523P3-190 200/230 7.5 22/22.5 60 3 50 4" 1750 87110414-01 4NC-7546P3-190 460 7.5 11 60 3 50 4" 1750 87110411-01 4NC-7523P3-182 200/230 7.5 21/21 60 3 50 4" 1750 87110415-01 4NC-7546P3-182 460 7.5 10.5 60 3 50 4" 1750 87110417-01 4NC-7546P3-160 460 7.5 8 60 3 50 4" 1750 87110422-00 4NC-1023P3-206 200/230 10 26/26 60 3 30 4" 1750 87110426-00 4NC-1046P3-206 460 10 13 60 3 30 4" 1750 87110423-00 4NC-1023P3-190 200/230 10 22/22.5 60 3 30 4" 1750 87110427-00 4NC-1046P3-190 460 10 11 60 3 30 4" 1750 87110428-00 4NC-1046P3-182 460 10 10.5 60 3 30 4" 1750 87110429-00 4NC-1046P3-170 460 10 9 60 3 30 4" 1750 87110422-01 4NC-1023P3-206 200/230 10 26/26 60 3 50 4" 1750 87110426-01 4NC-1046P3-206 460 10 13 60 3 50 4" 1750 87110423-01 4NC-1023P3-190 200/230 10 22/22.5 60 3 50 4" 1750 87110427-01 4NC-1046P3-190 460 10 11 60 3 50 4" 1750

    VIEW
  • Introducing Franklin Electric 3NC Series Non-Clog Pumps: The Ultimate Wastewater Tran...

    March 26, 2024

    When it comes to wastewater transfer, reliability, efficiency, and ease of maintenance are paramount. That's why professionals turn to the Franklin Electric 3NC Series Non-Clog Pumps, available at PumpProducts.com. Engineered for rugged performance and maintenance-friendly operation, these pumps deliver unparalleled results in sewage, effluent, irrigation, and general dewatering applications. Maintenance Made Simple The Franklin Electric 3NC Series features a field-adjustable wear plate, providing clearance between the impeller and volute for simplified maintenance. This innovative design minimizes operational downtime and maximizes profitability without the need for additional costly replaceable wear rings. With simplified on-site maintenance, you can keep your operations running smoothly and efficiently. Enhanced Seal Life Equipped with factory-standard dual silicon carbide mechanical seals, the Franklin Electric 3NC Series offers up to six times longer seal life compared to traditional carbon versus ceramic seals. These seals have low thermal expansion and higher abrasion resistance, ensuring optimal performance and reliability even in the harshest conditions. Plus, with a factory-standard exclusion seal, you have an added layer of protection. In the rare event of a breach, the Seal Fail probe sends a signal to the control panel, providing an alert for immediate service. Premium Construction Constructed with corrosion-resistant materials, the Franklin Electric 3NC Series is built to withstand the toughest environments. All castings are powder-coated for enhanced durability, while ductile iron casted impellers provide added corrosion resistance and are less brittle when handling rigid debris. Additionally, the motor enclosure sealing system utilizes Fluoroelastomer (FKM) O-Rings, offering superior chemical and temperature resistance for long-lasting performance. Specifications 3" horizontal flange discharge (125# ANSI flange) Maximum solids size: 2.5" Power cable: 8/4-type SOOW– available in 30' & 50' lengths Sensor cable: 16/4-type SOOW – available in 30' & 50' lengths Class F motor insulation Continuous duty motor (104 °F maximum) Lower double row ball bearing 300 series SST motor shaft Seal-fail indication probe 300 series SST fasteners Cast iron motor housing, volute, and seal chamber Fluoroelastomer (FKM) sealing system for motor enclosure Mechanical seals: Dual silicon carbide Additional exclusion seal Applications The Franklin Electric 3NC Series Non-Clog Sewage Pumps are versatile and can be used for a multitude of purposes in commercial and industrial applications, including sewage, effluent, irrigation, and general dewatering. With their robust construction, advanced features, and reliable performance, these pumps are the ideal choice for demanding wastewater transfer applications. Experience the ultimate in wastewater transfer solutions with the Franklin Electric 3NC Series Non-Clog Sewage Pumps, available now at PumpProducts.com.                                                                                      Model Comparison Chart SKU Model Voltage (Volts) Power (HP) Current (Amps) Frequency (Hz) Phase Cord Length (ft) Discharge Size RPM 87109896-00 3NC-323P1-184 230 3 25 60 1 30 3" 1750 87109899-00 3NC-323P3-184 200/230 3 16/15 60 3 50 3" 1750 87110360-00 3NC-346P3-184 460 3 7.5 60 3 30 3" 1750 87109897-00 3NC-323P1-172 230 3 22.5 60 1 30 3" 1750 87110358-00 3NC-323P3-172 200/230 3 14.5/13.5 60 3 30 3" 1750 87110361-00 3NC-346P3-172 460 3 6.5 60 3 30 3" 1750 87109898-00 3NC-323P1-160 230 3 19 60 1 30 3" 1750 87110359-00 3NC-323P3-160 200/230 3 13.5/12 60 3 30 3" 1750 87110362-00 3NC-346P3-160 460 3 6 60 3 30 3" 1750 87110366-00 3NC-523P1-190 230 5 28.5 60 1 30 3" 1750 87110370-00 3NC-523P3-196 200/230 5 21/18.5 60 3 30 3" 1750 87110374-00 3NC-546P3-196 460 5 9.5 60 3 30 3" 1750 87110367-00 3NC-523P1-184 230 5 25 60 1 30 3" 1750 87110371-00 3NC-523P3-184 200/230 5 16/15 60 3 30 3" 1750 87110375-00 3NC-546P3-184 460 5 8 60 3 30 3" 1750 87109899-01 3NC-323P3-184 200/230 3 16/15 60 3 50 3" 1750 87110360-01 3NC-346P3-184 460 3 7.5 60 3 50 3" 1750 87110358-01 3NC-323P3-172 200/230 3 14.5/13.5 60 3 50 3" 1750 87110361-01 3NC-346P3-172 460 3 6.5 60 3 50 3" 1750 87110359-01 3NC-323P3-160 200/230 3 13.5/12 60 3 50 3" 1750 87110362-01 3NC-346P3-160 460 3 6 60 3 50 3" 1750 87109896-01 3NC-323P1-184 230 3 25 60 1 50 3" 1750 87109897-01 3NC-323P1-172 230 3 22.5 60 1 50 3" 1750 87109898-01 3NC-323P1-160 230 3 19 60 1 50 3" 1750 87110366-01 3NC-523P1-190 230 5 28.5 60 1 50 3" 1750 87110370-01 3NC-523P3-196 200/230 5 21/18.5 60 3 50 3" 1750 87110374-01 3NC-546P3-196 460 5 9.5 60 3 50 3" 1750 87110367-01 3NC-523P1-184 230 5 25 60 1 50 3" 1750 87110371-01 3NC-523P3-184 200/230 5 16/15 60 3 50 3" 1750 87110375-01 3NC-546P3-184 460 5 8 60 3 50 3" 1750

    VIEW
  • Elevate Your Sewage Pumping with the Barnes SEV-511/521 Series

    March 25, 2024

    When it comes to residential sewage ejector applications, reliability and performance are non-negotiable. That's why professionals turn to the Barnes SEV-511/521 series of Sewage Pumps, available at PumpProducts.com. Combining high-quality construction, exceptional performance, and affordability, these pumps are engineered to tackle the toughest sewage challenges with ease. Superior Performance The Barnes SEV-511/521 series is designed to deliver maximum performance in residential sewage applications. With a maximum flow rate of 117 GPM at 4 feet of head and a maximum shutoff head of 21 feet, these pumps are capable of handling even the most demanding pumping tasks. The bronze vortex impeller ensures efficient solids handling, with a capacity of up to 2 inches. Reliable Operation Equipped with a permanent split capacitor motor, the Barnes SEV-511/521 series delivers reliable performance, longer motor life, and greater starting torque. The 1/2 HP, 1750 RPM single-phase motor includes overload protection for added peace of mind. Additionally, heavy-duty upper and lower ball bearings are oil lubricated for superior cooling and maximum life, ensuring smooth operation even in the most challenging conditions. Built to Last Constructed of durable cast iron with oil-filled motors, the Barnes SEV-511/521 series is built to withstand the rigors of continuous operation. With a standard 15-foot cord length, these pumps offer flexibility and convenience in installation. Please note that a manual level control switch is not provided, ensuring you have control over your sewage pumping needs. Applications The Barnes SEV-511/521 series is ideal for typical raw sewage applications in residential settings. Whether you're dealing with household sewage or wastewater, these pumps are up to the task, providing reliable performance when you need it most. Experience the Difference Discover the unmatched reliability and performance of the Barnes SEV-511/521 series sewage pumps, available at PumpProducts.com. Elevate your sewage pumping capabilities today and experience the difference for yourself! Model Comparison Chart Model Discharge (NPT Vertical) HP Voltage Phase GPM Max. Head SEV511 2" 1/2 115 1 118 23' SEV511A 2" 1/2 115 1 118 23' SEV521 2" 1/2 230 1 118 23' SEV511AU 2" 1/2 115 1 118 23' SEV511VF 2" 1/2 115 1 118 23' SEV521AU 2" 1/2 230 1 118 23'

    VIEW
  • Discover Superior Performance with the Barnes SEV Series Sewage Pumps

    March 25, 2024

    When it comes to handling raw sewage, reliability and efficiency are paramount. That's why professionals trust the Barnes SEV series of submersible, non-clog sewage pumps, available at PumpProducts.com. Engineered for typical raw sewage applications, these pumps deliver outstanding performance even in the most demanding environments. Designed for Durability The Barnes SEV series Sewage Pumps features a robust construction designed to withstand the rigors of sewage pumping. With a single seal design and the ability to handle spherical solids up to 2 inches in diameter, these pumps are equipped to handle tough sewage applications. The torque curved, oil filled, squirrel cage induction motors ensure reliable operation, while the durable cast iron construction provides long-lasting durability. Key Features: 2″ NPT, female, vertical discharge for easy installation and maintenance Cast iron volute, motor housing, impeller, and seal plate for maximum durability Multi-vane vortex design impeller with pump out vanes on the back side for efficient solids handling 416 stainless steel shaft for corrosion resistance and longevity Buna-N square rings and 300 series stainless steel hardware for superior performance in harsh environments Single mechanical seal design made of Carbon/Ceramic/Buna-N for reliable sealing Single row, oil lubricated upper and lower ball bearings for smooth operation and reduced maintenance requirements Experience the Difference With the Barnes SEV series Sewage Pumps, you can trust that your sewage pumping needs will be met with unparalleled reliability and performance. Whether you're dealing with residential sewage or industrial wastewater, these pumps are up to the task. Explore the full range of Barnes SEV series pumps at PumpProducts.com and experience the difference for yourself! Model Comparison Chart Model Discharge (NPT Vertical) HP Voltage Phase GPM Max. Head SEV412 2" 1/2 115 1 71 25' SEV412A 2" 1/2 115 1 71 25' SEV412AT 2" 1/2 115 1 71 25' SEV412VF 2" 1/2 115 1 71 25' SEV412VFT 2" 1/2 115 1 71 25'

    VIEW
  • Introducing the Barnes SE Series: Your Reliable Solution for Raw Sewage Pumping

    March 25, 2024

    When it comes to handling raw sewage, you need a pump that you can trust to deliver consistent performance in even the toughest conditions. That's where the Barnes SE series comes in. Available at PumpProducts.com, these submersible, non-clog sewage pumps are specifically designed for typical raw sewage applications, making them the ideal choice for residential, commercial, and industrial settings. Built for Tough Applications The Barnes SE Series Sewage Pumps are engineered to handle the challenges of raw sewage with ease. Featuring a single seal design and the ability to handle spherical solids up to 2 inches in diameter, these pumps are up to the task. The torque curved, oil filled, squirrel cage induction motor ensures reliable performance, while the durable cast iron construction provides long-lasting durability. Key Features: Solids Handling Capacity: Up to 2-3 inches, depending on the model, allowing for efficient handling of waste materials Epoxy sealed cord housing with strain relief grommet for added protection and durability 125 lb. flange design for easy installation and maintenance 50,000 hour bearing life ensures long-term reliability and performance Stainless Steel lifting bail and hardware (available in the 4SE model) for added strength and corrosion resistance Find Your Pump Today! Experience the reliability and performance of the Barnes SE series Sewage Pumps for yourself. Whether you're dealing with residential sewage or industrial wastewater, these pumps are designed to meet your needs. Shop online now at PumpProducts.com and discover why Barnes pumps are trusted by professionals worldwide! Model Comparison Chart Model Discharge (NPT) HP Voltage Phase GPM Max. Head SE411 2" 4/10 115 1 120 25' SE411A 2" 4/10 115 1 120 25' SE421 2" 4/10 230 1 120 25' SE411VF 2" 4/10 115 1 120 25' SE511 2" 1/2 115 1 142 25' SE511A 2" 1/2 115 1 142 25' SE521 2" 1/2 230 1 142 25' SE511AU 2" 1/2 115 1 142 25' SE511VF 2" 1/2 115 1 142 25' SE521AU 2" 1/2 230 1 142 25'

    VIEW
  • Introducing the Barnes 4SE-L Series: Your Solution for Reliable Sewage Pumping

    March 22, 2024

    When it comes to sewage pumping, you need a pump that you can depend on to handle the toughest applications with ease. Enter the Barnes 4SE-L series – a lineup of submersible sewage pumps designed to deliver unparalleled performance and durability. Available now at PumpProducts.com, these pumps are engineered to meet the demands of typical raw sewage applications. Built Tough for Demanding Environments The Barnes 4SE-L series is specifically designed to handle the challenges of raw sewage pumping. With a single seal design and the ability to handle spherical solids up to 2 inches in diameter, these pumps are built to tackle even the toughest jobs. Featuring a torque-curved, oil-filled, squirrel cage induction motor, they deliver reliable performance in a wide range of conditions. Reliable Construction for Longevity Constructed from durable materials, including cast iron ASTM A-48, Class 30 for the volute, motor housing, and seal plate, these pumps are built to last. The impeller features a 2 vane open design with pump out vanes on the back side, ensuring efficient solids handling and clog-free operation. With a 416 stainless steel shaft and 300 series stainless steel hardware, these pumps are designed to withstand the harshest conditions. Key Features: 3″ & 4″, 125 lb, flanged horizontal discharge for easy installation and maintenance Single mechanical seal design, made of Carbon/Ceramic/Buna-N, with an oil-filled reservoir and secondary exclusion seal for reliable sealing and leak prevention Single row, oil lubricated upper and lower ball bearings for smooth and efficient operation Find Your Pump Today! Experience the reliability and performance of the Barnes 4SE-L series at PumpProducts.com. Whether you're pumping raw sewage in a residential, commercial, or industrial setting, these pumps are up to the task. Shop online now and discover why Barnes pumps are trusted by professionals worldwide! Model Comparison Chart Model Discharge (Flanged Horizontal) HP Voltage Phase GPM Max. Head 4SE924L 4" 0.9 240 1 164 25' 4SE914L 4" 0.9 120 1 164 25' 4SE1474L 4" 1.4 200/240 1 185 30' 4SE944L 4" 0.9 480 3 164 25' 4SE954L 4" 0.9 600 3 164 25' 4SE994L 4" 0.9 200/240 3 164 25' 4SE1454L 4" 1.4 600 3 185 30' 4SE1494L 4" 1.4 200/240 3 185 30' 4SE1444L 4" 1.4 480 3 185 30' 4SE1974L 4" 1.9 200/240 1 220 38' 4SE1944L 4" 1.9 480 3 220 38' 4SE1954L 4" 1.9 600 3 220 38' 4SE1994L 4" 1.9 200/240 3 220 38' 4SE5032L 4" 5 230 3 195 98' 4SE5042L 4" 5 460 3 195 98' 4SE1946L 4" 1.9 460 3 360 22' 4SE1996L 4" 1.9 200/230 3 360 22' 4SE1926L 4" 1.9 230 1 360 22' 4SE2896L 4" 2.8 200/230 3 375 26' 4SE2846L 4" 2.8 460 3 375 26' 4SE3794L 4" 3.7 200/230 3 430 41' 4SE3744L 4" 3.7 460 3 430 41' 4SE2826L 4" 2.8 230 1 375 26' 4SE2844L 4" 2.8 460 3 400 35' 4SE2894L 4" 2.8 200/230 3 400 35' 4SE5094L 4" 5 200/230 3 490 48' 4SE5044L 4" 5 460 3 490 48' 4SE2824L 4" 2.8 230 1 400 35' 4SE5024L 4" 5 230 1 490 48' 4SE3724L 4" 3.7 230 1 430 41' 4SE4544L 4" 4.5 460 3 650 40' 4SE4534L 4" 4.5 230 3 650 40' 4SE4564L 4" 4.5 200 3 650 40' 4SE7534L 4" 7.5 230 3 730 50' 4SE7544L 4" 7.5 460 3 730 50' 4SE4596L 4" 4.5 200/230 3 650 35' 4SE4546L 4" 4.5 460 3 650 35' 4SE4524L 4" 4.5 230 1 650 40' 4SE11344L 4" 11.3 460 3 880 70' 4SE11334L 4" 11.3 230 3 880 70' 4SE7564L 4" 7.5 200 3 730 50' 4SE7524L 4" 7.5 230 1 730 50' 4SE7596L 4" 7.5 200/230 3 900 50' 4SE7546L 4" 7.5 460 3 900 50' 4SE11364L 4" 11.3 200 3 880 70' 4SE15034L 4" 15 230 3 950 80' 4SE15044L 4" 15 460 3 950 80' 4SE11396L 4" 11.3 200/230 3 980 55' 4SE11346L 4" 11.3 460 3 980 55'

    VIEW
  • Discover the Barnes 4SE-HL Series: Powerful Solutions for Raw Sewage Pumping

    March 22, 2024

    When it comes to handling raw sewage in demanding applications, you need a pump that you can rely on. Introducing the Barnes 4SE-HL series – a lineup of submersible sewage pumps designed to tackle the toughest pumping tasks with ease. Available now at PumpProducts.com, these pumps offer unmatched performance, durability, and versatility. Robust Design for Raw Sewage Applications The Barnes 4SE-HL series is engineered for typical raw sewage applications, making it the ideal choice for residential, commercial, and industrial settings. With a double seal design and the ability to handle spherical solids up to 3 inches in diameter, these pumps ensure reliable performance in even the most challenging environments. The series features torque-curved, oil-filled, squirrel cage induction motors that deliver efficient operation and long-lasting reliability. Built to Last Constructed with durable cast iron and featuring oil-filled motors, Barnes solids handling pumps are built to withstand the rigors of sewage pumping. The motor housing and seal plate are made of cast iron ASTM A-48, Class 30, ensuring superior strength and durability. The volute, made of cast iron ASTM A-48, Class 30 with a bronze wear ring, provides added protection against wear and tear. Additionally, with a 416 stainless steel shaft, Buna-N square rings and diaphragm, 300 series stainless steel hardware, and 304 stainless steel lifting bail, these pumps are designed to provide years of reliable service. Key Features: 4″ 125lb, flanged horizontal discharge for easy installation and maintenance 2 vane enclosed impeller design with pump out vanes for efficient solids handling and clog-free operation Double mechanical seal design, made of Carbon/Ceramic/Buna-N, with an oil-filled pressure equalized reservoir for reliable sealing and leak prevention Moisture sensor (Normally Open) and temperature sensor (Normally Closed) for added protection and control Find Your Pump Today! Experience the power and reliability of the Barnes 4SE-HL series at PumpProducts.com. Whether you need to pump raw sewage in a residential, commercial, or industrial setting, these pumps are up to the task. Shop online now and discover why Barnes pumps are trusted by professionals worldwide! Model Comparison Chart Model Discharge (Flanged Horizontal) HP Voltage Phase GPM Max. Head 4SE7534HL 4" 7.5 230 3 640 50' 4SE7544HL 4" 7.5 460 3 640 50' 4SE11334HL 4" 11.3 230 3 750 72' 4SE11344HL 4" 11.3 460 3 750 72' 4SE15034HL 4" 15 230 3 800 90' 4SE15044HL 4" 15 460 3 800 90' 4SE7524HL 4" 7.5 230 1 640 50'

    VIEW
  • Introducing the Barnes 4SE-DS Series: Versatile Sewage Pumps for Every Application

    March 22, 2024

    Looking for a reliable solution to handle raw sewage in your facility or application Explore the Barnes 4SE-DS series, a lineup of submersible sewage pumps designed to tackle the toughest sewage pumping tasks with ease. Available now at PumpProducts.com, these pumps offer robust performance, durable construction, and unmatched versatility. Superior Design for Raw Sewage Applications The Barnes 4SE-DS series is engineered for typical raw sewage applications, making it the perfect choice for residential, commercial, and industrial settings. With a double seal design and the ability to handle spherical solids up to 2 inches in diameter, these pumps ensure reliable performance in even the most demanding environments. The torque-curved, oil-filled, squirrel cage induction motor provides efficient operation while withstanding continuous use. Built to Last Constructed with durable cast iron and featuring oil-filled motors, Barnes solids handling pumps are built to withstand the rigors of sewage pumping. The volute, motor housing, and seal plate are made of cast iron ASTM A-48, Class 30, ensuring superior strength and durability. Plus, with a 416 stainless steel shaft, 300 series stainless steel hardware, and single row, ball, oil-lubricated upper and lower bearings, these pumps are designed to provide years of reliable service. Key Features: 3″ & 4″, 125 lb, flange horizontal discharge for easy installation and maintenance 2 vane open impeller design with pump out vanes for efficient solids handling and clog-free operation Tandem mechanical seal design, made of Carbon/Ceramic/Buna-N, with an oil-filled reservoir for reliable sealing and leak prevention Find Your Pump Today! Discover the power and reliability of the Barnes 4SE-DS series at PumpProducts.com. Whether you need to pump raw sewage in a residential, commercial, or industrial setting, these pumps are up to the task. Shop online now and experience the Barnes difference! Model Comparison Chart Model Discharge (Flanged Horizontal) HP Voltage Phase GPM Max. Head 4SE914DS 4" 0.9 120 1 164 25' 4SE924DS 4" 0.9 240 1 164 25' 4SE1474DS 4" 1.4 200/240 1 165 30' 4SE944DS 4" 0.9 480 3 164 25' 4SE954DS 4" 0.9 600 3 164 25' 4SE994DS 4" 0.9 200/240 3 164 25' 4SE1454DS 4" 1.4 600 3 165 30' 4SE1494DS 4" 1.4 200/240 3 165 30' 4SE1444DS 4" 1.4 480 3 165 30' 4SE1974DS 4" 1.9 200/240 1 220 38' 4SE1994DS 4" 1.9 200/240 3 220 38' 4SE1944DS 4" 1.9 480 3 220 38' 4SE1954DS 4" 1.9 600 3 220 38'

    VIEW