Blog

The Zoeller 160 series high head “Flow-Mate” effluent/sump pumps are designed for high head effluent, groundwater, and general dewatering applications. They can pump effluent or groundwater. The Zoeller 160 series pumps are typically used in a septic tank, low pressure pipe (LPP), and an enhanced flow step system settings.

These pumps are rugged cast iron, with an epoxy powder coated finish for extra corrosion protection. The impeller is non-clogging bronze vortex. The upper and lower sleeve bearings run in a bath of oil, the shaft seal is made of carbon and ceramic, the bolts, screws, handle, guard, arm, and seals are all stainless steel. There are no sheet metal parts to rust or corrode in the pump. The motor is 60 Hz, 3450 RPM, oil-filled, and hermetically-sealed with automatic reset thermal overload protection (in single phase models).

Each pump can operate at water temperatures up to 130°F for effluent applications.  This pump can pass up to ¾” spherical solids. Automatic models include a 2-pole mechanical float switch. All models include a standard 20 ft. UL listed 3-wire power cord with options for 25, 35, and 50 ft. The standard discharge size is 1-1/2″ NPT with 2″ and 3″ flanges available.

Pumps with the “161-163-165” prefix are single seal while pumps with the “4161-4163-4165” prefix are double seal with improved bearing lubrication.

Please note that automatic models are not recommended for use in effluent systems.

Model Comparison Chart

Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.