The Sta-Rite HMS Series pumps are horizontal, multi-stage jet pumps primarily used for water and sprinkling applications in homes, farms and cottages. These convertible pumps can be used as shallow well, deep well or centrifugal pumps.
Features
- Close-grained cast iron pump body is rugged, one-piece unit, specially treated to resist corrosion
- Drain port provided for easy winterizing
- Precision-machined diffusers assure faster priming
- Precision-lapped and highly polished carbon-ceramic mechanical shaft seal with stainless steel construction. Internal design guarantees continuous water lubrication for maximum protection
- Precision molded polycarbonate impeller for perfect balance and ultrasmooth for highest performance and efficiency
- Motor windings with superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life
- All electrical components are protected from dirt, dust and insects by a dustproof canopy. Ventilating air cannot contaminate vital switching components eliminating the most common cause of motor failure
- Dynamically balanced rotor is diecast under high pressures for uniform performance and greater efficiency
- Heavy-duty ball bearings are shielded and permanently lubricated, extensively tested to ensure extended life and smooth, quiet operation
- Pump and motor shaft are made of stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment
- Suction port: drive-over-suction
Notes
- Pumps installed with a Pro-Source tank require a 100 psi relief valve*
- Pumps installed with a conventional tank require a 75 psi*
* Relief valve must be capable of relieving entire flow of pump at relief pressure
Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package and an automatic pressure regulator PKG 107 must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly).
STA-RITE HMS SERIES HORIZONTAL MULTI-STAGE CONVERTIBLE JET PUMPS |
Model Comparison Chart
Model | Discharge | Suction | Drive | HP | Voltage | Phase | Stages | Approx. Weight |
HMSD-1FL | 1″ NPT | 1-1/4″ NPT | 1″ NPT | 3/4 | 115/230 | 1 | 2 | 50 lbs. |
HMSE-1FL | 1″ NPT | 1-1/4″ NPT | 1″ NPT | 1 | 115/230 | 1 | 2 | 80 lbs. |
HMSF-1FL | 1″ NPT | 1-1/4″ NPT | 1″ NPT | 1-1/2 | 115/230 | 1 | 2 | 85 lbs. |
PERFORMANCE RATINGS |
TYPICAL INSTALLATION |
DIMENSIONAL DATA |
REPAIR PARTS |
BROCHURE |
Sta-Rite HMS Series Technical Brochure |
MANUAL |
Sta-Rite HMS Series Owners Manual |
INSTRUCTIONS |
Sta-Rite HMS Series Pressure Switch Instructions |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.