The Sta-Rite MS series vertical jet pumps are the industry standard deep well jet pumps for over-the-well “bolt-on” installations. The MS series jet pumps include the pre-plumbed external automatic regulator, pressure gauge, and pressure switch. Built for water systems and sprinkling systems in homes, farms and cottages.
A complete line of casing adapters to drive the 4″ double pipe or 2″ and 3″ single pipe jet packages are available. A jet package should be ordered with every MS series pump. All installations require an appropriate size adapter flange or casing adapter if bolt-on feature is desired.
Features:
- Automatic pressure regulator: has a faster acting and quieter, design eliminating “hunting” for correct drive pressure. New, improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells
- Quality, precision machined, close-grained cast iron pump body and base are specially treated to resist corrosion
- Noryl impellers are precision-molded for perfect balance, and ultra-smooth for highest performance and efficiency
- Pressure switch is high quality. Differential and cut-in/cut-out pressure settings are adjustable
- Motor windings have superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life
- Mechanical shaft seal has precision-lapped and highly polished carbon-ceramic, stainless steel construction. Internal design guarantees continuous water lubrication for maximum protection
- All electrical components are protected from dirt, dust and insects by a dustproof canopy. Ventilating air cannot contaminate vital switching components. This eliminates the most common cause of motor failure
- Dynamically balanced rotor is diecast under high pressures for uniform performance and greater efficiency
- Heavy-duty ball bearings are permanently lubricated sealed bearings, extensively tested to ensure extended life and smooth, quiet operation
- Pump and motor shaft is stainless steel for maximum corrosion resistance. One-piece threaded shaft for positive impeller drive and alignment
STA-RITE MS SERIES VERTICAL DEEP WELL JET PUMPS |
Model Comparison Chart
Model |
Suction |
Discharge |
Drive |
HP |
Voltage |
Max. Press. Reg. Setting |
Approx. Weight |
MSD-7 |
1-1/4″ |
1″ |
1″ |
3/4 |
115/230 |
40 PSI |
67 lbs. |
MSE-7 |
1-1/4″ |
1″ |
1-1/4″ |
1 |
115/230 |
60 PSI |
73 lbs. |
MSF-7 |
1-1/4″ |
1″ |
1-1/4″ |
1-1/2 |
230 |
85 PSI |
120 lbs. |
MSG-7 |
1-1/4″ |
1″ |
1-1/4″ |
2 |
230 |
95 PSI |
125 lbs. |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.