Blog

The Berkeley PL series pumps are a convertible jet pump series designed for use in water systems and sprinkling systems in homes, farms, and cottages. Durability and corrosion resistance are built into every PL series pump due to the rugged, rustproof (yet lightweight) fiberglass reinforced thermoplastic pump construction. The engineered composite components are extremely resistant to sand and abrasive wear. Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly). Features: Lightweight rustproof pump body is made of Dura-Glas All components in contact with water are resistant to the corrosive and abrasive forces found in the most aggressive water conditions Multi-port, reinforced polypropylene, diffuser design primes faster and handles more air Precision molded noryl impeller gives perfect balance and ultra smoothness for highest performance and efficiency Performance-proven, built-in regulator is adjustable for best performance on all deep well installations Stainless steel shaft seal acts as heat sink to provide maximum cooling of the mechanical shaft seal Dustproof canopy on motor completely encloses electrical components and provides dust, dirt and insect protection Ventilating air cannot contaminate vital switching components Permanently lubricated, heavy duty ball bearings ensure smooth, quiet operation Easy serviceability due to the easy-to-remove stainless steel clamp Piping does not have to be disturbed. Seals can be replaced in just a few minutes Jet packages are sold separately BERKELEY PL SERIES CONVERTIBLE JET PUMPS Model Comparison Chart Model Discharge Suction Drive HP Voltage Phase Approx. Wt. 5PL 1" 1-1/4" 1" 1/2 115/230 1 27 lbs. 7PL 1" 1-1/4" 1" 3/4 115/230 1 28 lbs. 10PL 1" 1-1/4" 1" 1 115/230 1 30 lbs. 15PLS11C 1" 1-1/4" 1" 1-1/2 115/230 1 36 lbs. PUMP PERFORMANCE RECOMMENDED INSTALLATIONS DIMENSIONS REPAIR PARTS OPERATION ELECTRICAL INFORMATION TROUBLESHOOTING BROCHURE Berkeley PL Convertible Jet Pump Brochure MANUAL Berkeley PL Convertible Jet Pump Owner's Manual INSTRUCTIONS Berkeley Jet Pump Pressure Switch Instructions Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

The Sta-Rite PL series convertible jet pumps are corrosion resistant pumps built for water systems, sprinkling systems and various applications in homes, farms and cottages. Each pump is made of durable fiberglass reinforced thermoplastic, ensuring years of trouble-free installation. Features Pump rustproof constructed body is Dura-Glas fiberglass reinforced thermoplastic—lightweight, rustproof and exceptionally strong. All components in contact with water are resistant to the corrosive and abrasive forces found in the most aggressive water conditions Precision-molded Noryl impeller gives perfect balance and ultra-smoothness for highest performance and efficiency Noryl Nozzle Noryl Venturi Buna-N O-ring Stainless steel heat sink provides maximum cooling of the mechanical shaft seal Heavy-duty motor has a dustproof canopy which completely encloses electrical components and provides dust, dirt and insect protection. Ventilating air cannot contaminate vital switching components. Permanently lubricated, heavy-duty ball bearings ensure smooth, quiet operation and extended motor life Precision Diffuser has a multi-port, reinforced polypropylene with brass wear ring design, primes faster and handles more air Shallow well jet is sold separately Pressure Switch Pre-Set at 30–50 PSI Suction-over-drive suction ports Performance-proven, simple, built-in pressure regulator is adjustable for best performance on all deep well installations. Pressure gauge included. Easy Serviceability: PL pumps are disassembled by removing the stainless steel clamp. Piping does not have to be disturbed. Seal replacement takes only a few minutes. “Control room” motor design makes all components easily accessible Please note that if using this pump for NEW INSTALLATIONS, a jet assembly package must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly). STA-RITE PL SERIES CONVERTIBLE JET PUMPS Model Comparison Chart Model Discharge Suction Drive HP Voltage Phase Shut-Off Pressure Approx. Weight PLC-2L 1" NPT 1-1/4" NPT 1" NPT 1/2 115/230 1 62-72 PSI 27 lbs. PLD-2L 1" NPT 1-1/4" NPT 1" NPT 3/4 115/230 1 52-62 PSI 28 lbs. PLE-2L 1" NPT 1-1/4" NPT 1" NPT 1 115/230 1 52-62 PSI 30 lbs. PLF-2L 1" NPT 1-1/4" NPT 1" NPT 1-1/2 115/230 1 54-64 PSI 36 lbs. PERFORMANCE RATINGS TYPICAL INSTALLATION DIMENSIONAL DATA REPAIR PARTS SPECIFICATIONS Sta-Rite PL Series Specifications MANUAL Sta-Rite PL Series Manual Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Based in the Northeast, where winters can be long and brutal, Pump Products' staff know there’s nothing worse than losing heat or power at home. That’s why each fall we deepen our inventory of heating pumps, power generators and other products designed to keep a home dry, warm and connected during the worst winter weather. “This is when the heating system is at it’s highest demand” says Application Engineer Fred Hettinger. "We’ve brought in the most popular circulator pumps and all the parts necessary to repair them in the event of a failure." We have Bell & Gossett's NRF Series, PL Series, Series 60, HV Series, HD3 Series and 2” and 3” Series circulator pumps in stock and ready to ship. (more…)