Barnes 084621, Model 4SE11396L, 4SE-L Series, Sewage Pump, 11.3 HP, 200/230 Volts, 3 Phase, 4" Flanged Horizontal Discharge, 980 GPM Max, 55 ft Max Head, 40 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Barnes 4SE-L Submersible Non-Clog Sewage Pump
This is a submersible, non-clog sewage pump designed for typical raw sewage applications. This pump has a double seal and can handle spherical solids up to 3 inch in diameter. It has a torque curved, oil filled, squirrel cage induction motor.
Features
- 4" 125lb., flanged horizonal discharge
- Volute, motor housing, and seal plate are cast iron ASTM A-48, Class 30
- Impeller has a 2 vane open design with pump out vanes on back side
- 416 stainless steel shaft
- 300 series stainless steel hardware
- 304 stainless steel lifting bail
- Double mechanical seal design made of Carbon/Ceramic/Buna-N with an oil filled pressure equalized reservoir
- Single row, oil lubricated, radial load upper and lower ball bearings
-
Moisture sensor (Normally Open ) and temperature sensor (Normally Closed) require relay in control panel
-
40 ft. cord, epoxy sealed housing with secondary pressure grommet for sealing and strain relief
Brand | Barnes |
Mfg. Number | 084621 |
Model | 4SE11396L |
Series | 4SE-L |
Product Type | Sewage pump |
Application | Raw sewage |
Operation | Manual |
Horsepower | 11.3 HP |
Voltage | 200/230 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 1150 RPM |
Max. Solid Size | 3" |
Impeller Type | 2 vane, open |
Pump Housing Material | Cast iron |
Discharge Connection | 4" flange 8 bolt horizontal |
Impeller Material | Cast iron |
Seal Type | Dual |
Maximum Flow | 980 GPM |
Maximum Head | 55 ft |
Paint | Air dry enamel |
Thermal Protection | Control panel required |
Power Cord Length | 40 ft |
Motor Casing Material | Cast iron |
Motor Shaft Material | 416 stainless steel |
Shaft Seal | Carbon/Ceramic/Buna-N |
Motor Design | NEMA B |
Service Factor | 1.15 |
Full Load Current | 32.2/28.0 Amps |
Locked Rotor Current | 107.8/124 Amps |
Max. Temperature (Continuous) | 104°F |
Power Cord Size | 8/4 |
Cord Type | SOW |
The Barnes 4SE-L series of submersible, non-clog sewage pumps are designed for typical raw sewage applications. This pump has a single seal and can handle spherical solids up to 2 inches in diameter. It has a torque curved, oil filled, squirrel cage induction motor. Barnes solids handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. Features
-
3" & 4", 125 lb, flanged horizontal discharge
-
Volute, motor housing, and seal plate are cast iron ASTM A-48, Class 30
-
Impeller has a 2 vane open design with pump out vanes on back side
-
416 stainless steel shaft
-
300 series stainless steel hardware
-
Single mechanical seal design, made of Carbon/Ceramic/Buna-N, with an oil filled reservoir and secondary exclusion seal
-
Single row, oil lubricated upper and lower ball bearings
BARNES 4SE-L SERIES SEWAGE PUMPS |
Barnes 4SE-L Series Sewage Pumps
Model Comparison Chart
Model | Discharge (Flanged Horizontal) | HP | Voltage | Phase | GPM | Max. Head |
4SE924L | 4" | 0.9 | 240 | 1 | 164 | 25' |
4SE914L | 4" | 0.9 | 120 | 1 | 164 | 25' |
4SE1474L | 4" | 1.4 | 200/240 | 1 | 185 | 30' |
4SE944L | 4" | 0.9 | 480 | 3 | 164 | 25' |
4SE954L | 4" | 0.9 | 600 | 3 | 164 | 25' |
4SE994L | 4" | 0.9 | 200/240 | 3 | 164 | 25' |
4SE1454L | 4" | 1.4 | 600 | 3 | 185 | 30' |
4SE1494L | 4" | 1.4 | 200/240 | 3 | 185 | 30' |
4SE1444L | 4" | 1.4 | 480 | 3 | 185 | 30' |
4SE1974L | 4" | 1.9 | 200/240 | 1 | 220 | 38' |
4SE1944L | 4" | 1.9 | 480 | 3 | 220 | 38' |
4SE1954L | 4" | 1.9 | 600 | 3 | 220 | 38' |
4SE1994L | 4" | 1.9 | 200/240 | 3 | 220 | 38' |
4SE5032L | 4" | 5 | 230 | 3 | 195 | 98' |
4SE5042L | 4" | 5 | 460 | 3 | 195 | 98' |
4SE1946L | 4" | 1.9 | 460 | 3 | 360 | 22' |
4SE1996L | 4" | 1.9 | 200/230 | 3 | 360 | 22' |
4SE1926L | 4" | 1.9 | 230 | 1 | 360 | 22' |
4SE2896L | 4" | 2.8 | 200/230 | 3 | 375 | 26' |
4SE2846L | 4" | 2.8 | 460 | 3 | 375 | 26' |
4SE3794L | 4" | 3.7 | 200/230 | 3 | 430 | 41' |
4SE3744L | 4" | 3.7 | 460 | 3 | 430 | 41' |
4SE2826L | 4" | 2.8 | 230 | 1 | 375 | 26' |
4SE2844L | 4" | 2.8 | 460 | 3 | 400 | 35' |
4SE2894L | 4" | 2.8 | 200/230 | 3 | 400 | 35' |
4SE5094L | 4" | 5 | 200/230 | 3 | 490 | 48' |
4SE5044L | 4" | 5 | 460 | 3 | 490 | 48' |
4SE2824L | 4" | 2.8 | 230 | 1 | 400 | 35' |
4SE5024L | 4" | 5 | 230 | 1 | 490 | 48' |
4SE3724L | 4" | 3.7 | 230 | 1 | 430 | 41' |
4SE4544L | 4" | 4.5 | 460 | 3 | 650 | 40' |
4SE4534L | 4" | 4.5 | 230 | 3 | 650 | 40' |
4SE4564L | 4" | 4.5 | 200 | 3 | 650 | 40' |
4SE7534L | 4" | 7.5 | 230 | 3 | 730 | 50' |
4SE7544L | 4" | 7.5 | 460 | 3 | 730 | 50' |
4SE4596L | 4" | 4.5 | 200/230 | 3 | 650 | 35' |
4SE4546L | 4" | 4.5 | 460 | 3 | 650 | 35' |
4SE4524L | 4" | 4.5 | 230 | 1 | 650 | 40' |
4SE11344L | 4" | 11.3 | 460 | 3 | 880 | 70' |
4SE11334L | 4" | 11.3 | 230 | 3 | 880 | 70' |
4SE7564L | 4" | 7.5 | 200 | 3 | 730 | 50' |
4SE7524L | 4" | 7.5 | 230 | 1 | 730 | 50' |
4SE7596L | 4" | 7.5 | 200/230 | 3 | 900 | 50' |
4SE7546L | 4" | 7.5 | 460 | 3 | 900 | 50' |
4SE11364L | 4" | 11.3 | 200 | 3 | 880 | 70' |
4SE15034L | 4" | 15 | 230 | 3 | 950 | 80' |
4SE15044L | 4" | 15 | 460 | 3 | 950 | 80' |
4SE11396L | 4" | 11.3 |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An OrderInspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.* |