Barnes 084635, Model 4SE15044L, 4SE-L Series, Sewage Pump, 15 HP, 460 Volts, 3 Phase, 4" Flanged Horizontal Discharge, 950 GPM Max, 80 ft Max Head, 40 ft Cord, Manual, Double Seal

SKU #: 084635
Brand: Barnes
Available For Order! (Usually Ships 5-7 Days)This product is direct shipped from the manufacturer to our distribution center where it is checked, packaged and processed by our quality control team. The shipping time shown is the estimated number of business days the product will ship out from our wa
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
$8,856.70
Call Sales Counter !
Order By Phone
Calculate Shipping Ship Weight (376.00 lbs)

FEATURES

Barnes 4SE-L Submersible Non-Clog Sewage Pump

This is a submersible, non-clog sewage pump designed for typical raw sewage applications. This pump has a double seal and can handle spherical solids up to 3 inch in diameter. It has a torque curved, oil filled, squirrel cage induction motor.

Features

  • 4" 125lb., flanged horizonal discharge
  • Volute, motor housing, and seal plate are cast iron ASTM A-48, Class 30
  • Impeller has a 2 vane open design with pump out vanes on back side
  • 416 stainless steel shaft
  • 300 series stainless steel hardware
  • 304 stainless steel lifting bail
  • Double mechanical seal design made of Carbon/Ceramic/Buna-N with an oil filled pressure equalized reservoir
  • Single row, oil lubricated, radial load upper and lower ball bearings
  • Moisture sensor (Normally Open) and temperature sensor (Normally Closed) require relay in control panel
  • 40 ft. cord, epoxy sealed housing with secondary pressure grommet for sealing and strain relief
BrandBarnes
Mfg. Number084635
Model4SE15044L
Series4SE-L
Product TypeSewage pump
ApplicationRaw sewage
OperationManual
Horsepower 15 HP
Voltage 460 Volts
Phase3
Frequency60 Hz
Speed 1750 RPM
Max. Solid Size3"
Impeller Type2 vane, open
Pump Housing MaterialCast iron
Discharge Connection4" flange 8 bolt horizontal
Impeller MaterialCast iron
Seal TypeDual
Maximum Flow950 GPM
Maximum Head80 ft
PaintAir dry enamel
Thermal ProtectionControl panel required
Power Cord Length40 ft
Motor Casing MaterialCast iron
Motor Shaft Material416 stainless steel
Shaft SealCarbon/Ceramic/Buna-N
Motor DesignNEMA B
Service Factor1.15
Full Load Current 19 Amps
Locked Rotor Current80 Amps
Max. Temperature (Continuous)104°F
Power Cord Size6/4
Cord TypeSOW

The Barnes 4SE-L series of submersible, non-clog sewage pumps are designed for typical raw sewage applications. This pump has a single seal and can handle spherical solids up to 2 inches in diameter. It has a torque curved, oil filled, squirrel cage induction motor. Barnes solids handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. Features

  • 3" & 4", 125 lb, flanged horizontal discharge
  • Volute, motor housing, and seal plate are cast iron ASTM A-48, Class 30
  • Impeller has a 2 vane open design with pump out vanes on back side
  • 416 stainless steel shaft
  • 300 series stainless steel hardware
  • Single mechanical seal design, made of Carbon/Ceramic/Buna-N, with an oil filled reservoir and secondary exclusion seal
  • Single row, oil lubricated upper and lower ball bearings
BARNES 4SE-L SERIES SEWAGE PUMPS

Barnes 4SE-L Series Sewage Pumps

Model Comparison Chart

Model Discharge (Flanged Horizontal) HP Voltage Phase GPM Max. Head
4SE924L 4" 0.9 240 1 164 25'
4SE914L 4" 0.9 120 1 164 25'
4SE1474L 4" 1.4 200/240 1 185 30'
4SE944L 4" 0.9 480 3 164 25'
4SE954L 4" 0.9 600 3 164 25'
4SE994L 4" 0.9 200/240 3 164 25'
4SE1454L 4" 1.4 600 3 185 30'
4SE1494L 4" 1.4 200/240 3 185 30'
4SE1444L 4" 1.4 480 3 185 30'
4SE1974L 4" 1.9 200/240 1 220 38'
4SE1944L 4" 1.9 480 3 220 38'
4SE1954L 4" 1.9 600 3 220 38'
4SE1994L 4" 1.9 200/240 3 220 38'
4SE5032L 4" 5 230 3 195 98'
4SE5042L 4" 5 460 3 195 98'
4SE1946L 4" 1.9 460 3 360 22'
4SE1996L 4" 1.9 200/230 3 360 22'
4SE1926L 4" 1.9 230 1 360 22'
4SE2896L 4" 2.8 200/230 3 375 26'
4SE2846L 4" 2.8 460 3 375 26'
4SE3794L 4" 3.7 200/230 3 430 41'
4SE3744L 4" 3.7 460 3 430 41'
4SE2826L 4" 2.8 230 1 375 26'
4SE2844L 4" 2.8 460 3 400 35'
4SE2894L 4" 2.8 200/230 3 400 35'
4SE5094L 4" 5 200/230 3 490 48'
4SE5044L 4" 5 460 3 490 48'
4SE2824L 4" 2.8 230 1 400 35'
4SE5024L 4" 5 230 1 490 48'
4SE3724L 4" 3.7 230 1 430 41'
4SE4544L 4" 4.5 460 3 650 40'
4SE4534L 4" 4.5 230 3 650 40'
4SE4564L 4" 4.5 200 3 650 40'
4SE7534L 4" 7.5 230 3 730 50'
4SE7544L 4" 7.5 460 3 730 50'
4SE4596L 4" 4.5 200/230 3 650 35'
4SE4546L 4" 4.5 460 3 650 35'
4SE4524L 4" 4.5 230 1 650 40'
4SE11344L 4" 11.3 460 3 880 70'
4SE11334L 4" 11.3 230 3 880 70'
4SE7564L 4" 7.5 200 3 730 50'
4SE7524L 4" 7.5 230 1 730 50'
4SE7596L 4" 7.5 200/230 3 900 50'
4SE7546L 4" 7.5 460 3 900 50'
4SE11364L 4" 11.3 200 3 880 70'
4SE15034L 4" 15 230 3 950 80'
4SE15044L 4" 15 460 3 950 80'
4SE11396L 4" 11.3 questions

Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order

Inspector Pumphead & Our Customer Service Representatives Are Available

Mon-Fri 7:30 am to 5:00 pm EST

Call Toll Free: 800-429-0800

"Ask Inspector PumpHead"

*Note: Picture is illustrative and may not reflect the actual product.*