Barnes 096748, Model SE411A, SE Series, Sewage Pump with Wide Angle Mechanical Float Switch, 4/10 HP, 115 Volts, 1 Phase, 2" NPT Vertical Discharge, 120 GPM Max, 25 ft Max Head, 15 ft Cord, Automatic, Single Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
Barnes Series SE Submersible Effluent Pump is designed for handling greywater from wash basins, showers and baths in typical septic tank / effluent applications. It is also suitable for light commercial wastewater, storm water and decorative water feature applications. This pump has a heavy duty cast iron construction and rugged, oil filled NEMA motor.
Features
- 2" NPT, female vertical discharge
- 2" spherical solids handling
- 104°F (40°C) Continuous
- Cast iron volute, motor housing and seal plate
- 2 vane, open with pump out vanes on backside dynamically balanced impeller
- 300 series stainless impeller spacers and hardware
- Single row, ball and oil lubricated upper and lowering bearings
- Oil filled, Class B insulated, squirrel cage induced motor
- Includes a wide angle, PVC, mechanical, flota switch, 15 ft cord with piggy-back plug, Normally Open
| Brand | Barnes |
| Mfg. Number | 096748 |
| Model | SE411A |
| Series | SE |
| Product Type | Sewage pump |
| Application | Septic/Effluent |
| Operation | Automatic |
| Horsepower | 4/10 HP |
| Voltage | 115 Volts |
| Phase | 1 |
| Frequency | 60 Hz |
| Speed | 1750 RPM |
| Max. Solid Size | 2" |
| Float Switch | Wide angle/Mechanical/PVC/Piggy-back plug |
| Motor Insulation | Class B |
| Impeller Type | 2 vane, open |
| Pump Housing Material | Cast iron |
| Discharge Connection | 2" NPT female, vertical |
| Impeller Material | Cast iron |
| Seal Type | Single |
| Maximum Flow | 120 GPM |
| Maximum Head | 25 ft |
| Paint | Air dry enamel |
| Thermal Protection | Yes |
| Max. Temperature | 77°F |
| Power Cord Length | 15 ft |
| Motor Casing Material | Cast iron |
| Motor Shaft Material | 416 stainless steel |
| Shaft Seal | Carbon/Ceramic/Buna-N |
| Motor Design | NEMA L |
| Motor Type | Permanent split capacitor |
| Full Load Current | 12.0 Amps Amps |
| Locked Rotor Current | 19.0 Amps |
| Power Cord Size | 14/3 |
| Cord Type | SJTOW |
The Barnes SE sewage pump series are submersible, non-clog sewage pumps designed for typical raw sewage applications. These pumps have a single seal and can handle spherical solids up to 2 inch in diameter. The SE series has a torque curved, oil filled, squirrel cage induction motor. Barnes solids handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. Features
- Solids Handling Capacity: 2-3 inches, depending on model
- Cast iron construction
- Epoxy sealed cord housing with strain relief grommet
- 125 lb. flange design
- 50,000 hour bearing life
- Stainless Steel lifting bail and hardware (4SE)
| BARNES SE SERIES SEWAGE PUMPS |
Barnes SE Series Sewage Pumps
Model Comparison Chart
| Model | Discharge (NPT) | HP | Voltage | Phase | GPM | Max. Head |
| SE411 | 2" | 4/10 | 115 | 1 | 120 | 25' |
| SE411A | 2" | 4/10 | 115 | 1 | 120 | 25' |
| SE421 | 2" | 4/10 | 230 | 1 | 120 | 25' |
| SE411VF | 2" | 4/10 | 115 | 1 | 120 | 25' |
| SE511 | 2" | 1/2 | 115 | 1 | 142 | 25' |
| SE511A | 2" | 1/2 | 115 | 1 | 142 | 25' |
| SE521 | 2" | 1/2 | 230 | 1 | 142 | 25' |
| SE511AU | 2" | 1/2 | 115 | 1 | 142 | 25' |
| SE511VF | 2" | 1/2 | 115 | 1 | 142 | 25' |
| SE521AU | 2" | 1/2 | 230 | 1 | 142 | 25' |
| PERFORMANCE CURVES |
| DIMENSIONS |
| SPECIFICATIONS |
| REPAIR PARTS |
| TROUBLESHOOTING |
| SPECIFICATIONS |
| Barnes SE Series Sewage Pump Specifications |
| INSTALLATION MANUAL |
| Barnes SE Series Sewage Pump Installation Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
