Barnes 096755, Model SE521, SE Series, Sewage Pump, 1/2 HP, 230 Volts, 1 Phase, 2" NPT Vertical Discharge, 142 GPM Max, 25 ft Max Head, 15 ft Cord, Manual, Single Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
Barnes SE Submersible Sewage Pump
This sewage pump combines high quality, high performance and low cost in a rugged, heavy duty design. Capable of handling up to 2 inch spherical solids, the pump utilizes a cast iron impeller and a combination of cast iron and stainless steel components to stand up to the toughest residential sewage ejector applications.
Features
- Maximum flow rate to 142 GPM at 4 feet of head
- Maximum shutoff head of 25 feet
- Impeller provides 2" solids handling capability
- Permanent split capacitor motor for reliable, high performance, longer motor life, greater starting torque, and lower amp draw
- 1/2 HP, 1750 RPM single phase motor includes overload protection
- Heavy duty upper and lower ball bearings are oil lubricated for superior cooling and maximum life
- Standard 15 feet cord length
- Manual, level control switch not provided
Applications
- Typical raw sewage
| Brand | Barnes |
| Mfg. Number | 096755 |
| Model | SE521 |
| Series | SE |
| Product Type | Sewage pump |
| Application | Raw sewage |
| Operation | Manual |
| Horsepower | 1/2 HP |
| Voltage | 230 Volts |
| Phase | 1 |
| Frequency | 60 Hz |
| Speed | 1750 RPM |
| Max. Solid Size | 2" |
| Float Switch | N/A |
| Motor Insulation | Class B |
| Impeller Type | 2 vane; open |
| Pump Housing Material | Cast iron |
| Discharge Connection | 2" NPT female, vertical |
| Impeller Material | Cast iron |
| Seal Type | Single |
| Maximum Flow | 142 GPM |
| Maximum Head | 25 ft |
| Paint | Air dry enamel |
| Thermal Protection | Yes |
| Max. Temperature | 104°F |
| Power Cord Length | 15 ft |
| Motor Casing Material | Cast iron |
| Motor Shaft Material | 416 stainless steel |
| Shaft Seal | Carbon/Ceramic/Buna-N |
| Motor Design | NEMA L |
| Motor Type | Permanent split capacitor |
| Full Load Current | 6.2 Amps |
| Locked Rotor Current | 13.0 Amps |
| Power Cord Size | 14/3 |
| Cord Type | SJTOW |
The Barnes SE sewage pump series are submersible, non-clog sewage pumps designed for typical raw sewage applications. These pumps have a single seal and can handle spherical solids up to 2 inch in diameter. The SE series has a torque curved, oil filled, squirrel cage induction motor. Barnes solids handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. Features
- Solids Handling Capacity: 2-3 inches, depending on model
- Cast iron construction
- Epoxy sealed cord housing with strain relief grommet
- 125 lb. flange design
- 50,000 hour bearing life
- Stainless Steel lifting bail and hardware (4SE)
| BARNES SE SERIES SEWAGE PUMPS |
Barnes SE Series Sewage Pumps
Model Comparison Chart
| Model | Discharge (NPT) | HP | Voltage | Phase | GPM | Max. Head |
| SE411 | 2" | 4/10 | 115 | 1 | 120 | 25' |
| SE411A | 2" | 4/10 | 115 | 1 | 120 | 25' |
| SE421 | 2" | 4/10 | 230 | 1 | 120 | 25' |
| SE411VF | 2" | 4/10 | 115 | 1 | 120 | 25' |
| SE511 | 2" | 1/2 | 115 | 1 | 142 | 25' |
| SE511A | 2" | 1/2 | 115 | 1 | 142 | 25' |
| SE521 | 2" | 1/2 | 230 | 1 | 142 | 25' |
| SE511AU | 2" | 1/2 | 115 | 1 | 142 | 25' |
| SE511VF | 2" | 1/2 | 115 | 1 | 142 | 25' |
| SE521AU | 2" | 1/2 | 230 | 1 | 142 | 25' |
| PERFORMANCE CURVES |
| DIMENSIONS |
| SPECIFICATIONS |
| REPAIR PARTS |
| TROUBLESHOOTING |
| SPECIFICATIONS |
| Barnes SE Series Sewage Pump Specifications |
| INSTALLATION MANUAL |
| Barnes SE Series Sewage Pump Installation Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
