Barnes 133123, Model 3SE3044DS, 3SE-DS Series, Sewage Pump, 3 HP, 460 Volts, 3 Phase, 3" NPT Vertical Discharge, 320 GPM Max, 65 ft Max Head, 30 ft Cord, Manual, Double Seal
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Barnes 3SE-DS Submersible Non-Clog Sewage Pump
This is a submersible, non-clog sewage pump designed for typical raw sewage applications. This pump has a double seal and can handle spherical solids up to 2-1/2 inch in diameter. It has a torque curved, oil filled, squirrel cage induction motor.
Features
- 3" NPT, female, vertical discharge
- Volute, motor housing, impeller and seal plate are cast iron
- Impeller has a 2 vane semi-open design with pump out vanes on back side
- Buna-N square rings
- 300 series stainless steel hardware
- Double mechanical seal design made of Carbon/Ceramic/Buna-N with an oil filled pressure equalized reservoir
- Single row, oil lubricated upper and lower ball bearings
Brand | Barnes |
Mfg. Number | 133123 |
Model | 3SE3044DS |
Series | 3SE-DS |
Product Type | Sewage pump |
Application | Raw sewage |
Operation | Manual |
Horsepower | 3 HP |
Voltage | 460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 1750 RPM |
Max. Solid Size | 2-1/2" |
Motor Insulation | F |
Impeller Type | Two vane; semi-open |
Pump Housing Material | Cast iron |
Discharge Connection | 3" NPT female vertical |
Impeller Material | Cast iron |
Seal Type | Double |
Maximum Flow | 320 GPM |
Maximum Head | 65 ft |
Thermal Protection | Control panel required |
Max. Temperature | 104°F |
Paint Material | Air dry enamel |
Cord Length | 30 ft |
Motor Casing Material | Cast iron |
Motor Shaft Material | 416 stainless steel |
Shaft Seal | Carbon/Ceramic/Buna-N |
Motor Design | NEMA B |
Full Load Current | 9.0 Amps |
Locked Rotor Current | 28.0 Amps |
Power Cord Size | 14/4 |
Cord Type | SOOW/SOW |
The Barnes 3SE-DS series of submersible, non-clog sewage pumps are designed for typical raw sewage applications. This pump has a double seal and can handle spherical solids up to 2 inch in diameter. It has a torque curved, oil filled, squirrel cage induction motor. Barnes solids handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. Features
-
3" NPT, female, vertical, bolt-on flanged discharge
-
Volute, motor housing, impeller and seal plate are cast iron
-
Impeller has a 2 vane open design with pump out vanes on back side
-
416 stainless steel shaft
-
Buna-N square rings
-
300 series stainless steel hardware
-
Tandem mechanical seal design made of Carbon/Ceramic/Buna-N with an oil filled reservoir
-
Single row, oil lubricated upper and lower ball bearings
BARNES 3SE-DS SERIES SEWAGE PUMPS |
Barnes 3SE-DS Series Sewage Pumps
Model Comparison Chart
Model | Discharge (NPT) | HP | Voltage | Phase | GPM | Max. Head |
3SE514DS | 3" | 1/2 | 120 | 1 | 165 | 25' |
3SE524DS | 3" | 1/2 | 240 | 1 | 165 | 25' |
3SE544DS | 3" | 1/2 | 480 | 3 | 165 | 25' |
3SE554DS | 3" | 1/2 | 600 | 3 | 165 | 25' |
3SE594DS | 3" | 1/2 | 200/240 | 3 | 165 | 25' |
3SE774DS | 3" | 3/4 | 200/240 | 1 | 180 | 30' |
3SE1074DS | 3" | 1 | 200/240 | 1 | 220 | 37' |
3SE754DS | 3" | 3/4 | 600 | 3 | 180 | 30' |
3SE794DS | 3" | 3/4 | 200/240 | 3 | 180 | 30' |
3SE744DS | 3" | 3/4 | 480 | 3 | 180 | 30' |
3SE1094DS | 3" | 1 | 200/240 | 3 | 220 | 37' |
3SE1044DS | 3" | 1 | 480 | 3 | 220 | 37' |
3SE1054DS | 3" | 1 | 600 | 3 | 220 | 37' |
3SE1544DS | 3" | 1-1/2 | 460 | 3 | 375 | 40' |
3SE1524DS | 3" | 1-1/2 | 230 | 1 | 375 | 40' |
3SE1594DS | 3" | 1-1/2 | 200/230 | 3 | 375 | 40' |
3SE2044DS | 3" | 2 | 460 | 3 | 415 | 48' |
3SE2024DS | 3" | 2 | 230 | 1 | 415 | 48' |
3SE2094DS | 3" | 2 | 200/230 | 3 | 415 | 48' |
3SE3034DS | 3" | 3 | 230 | 3 | 320 | 65' |
3SE3044DS | 3" | 3 | 460 | 3 | 320 | 65' |
3SE3024DS | 3" | 3 | 230 | 1 | 320 | 65' |
PERFORMANCE CURVES |
DIMENSIONS |
SPECIFICATIONS |
REPAIR PARTS |
TROUBLESHOOTING |
SPECIFICATIONS |
Barnes 3SE-DS Series Sewage Pump Specifications |
INSTALLATION MANUAL |
Barnes 3SE-DS Series Sewage Pump Installation Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*