Goulds GWP1214, Preassembled Simplex Sewage Package With PS51A1 Pump, 1/2 HP, 115 Volts, 1 Phase, 2" NPT Discharge, (23" x 30") Polyethylene Basin, 18" Structural Foam Cover, 2" Compression Check Valve

SKU #: GWP1214
Brand: Goulds
Available For Order! ((Usually Ships 3-5 Days))This product  is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
$1,129.27
Call Sales Counter !
Order By Phone
Calculate Shipping Ship Weight (86.00 lbs)

FEATURES

Goulds GWP (23" x 30") Sewage Pump Package

Fully assembled at the factory for simplified installation and designed for dewatering wastewater containing solids up to 2", this pump package is ideal for:

  • Homes
  • Rural water districts
  • Parks
  • Sewage lift stations
  • Waste drainage in new additions below sewer line
  • Anywhere waste or drainage must be disposed of quickly, quietly and efficiently

Package includes:

  • Pump, model PS51A1 with T-spliced wide angle float switch
  • Basin (23" diameter x 30" high) with 4" slip type inlet hub and pump torque stop insert
  • Cover (18" diameter) with bolts, sealing tape, (2) 2", (1) 3" vent and discharge grommets
  • 2" compression check valve, model A9-2P
  • Discharge pipe, (2" diameter x 30" long) schedule 40 PVC

Package Features

  • Schedule 40, 2" PVC discharge pipe with 1/8" bleed hole is factory installed
  • Structural foam cover is strong and corrosion resistant
  • Vent grommets for both 2" and 3" vent provided to add system flexibility and reduce inventory
  • Torque stop insert to stabilize the pump
  • Ribbed polyethylene basin with 24.8 gallons capacity and molded-in slip inlet hub for connection using flexible, slip-fit connectors and clamps (not included)

Pump PS51A1 Features

  • 0.5 HP, 115 Volts, single phase
  • 2" NPT discharge
  • Passes up to 2" spherical solids
  • Maximum capacity is 130 GPM
  • Maximum head is 27 feet
  • Corrosion resistant construction
  • Cast iron body
  • Thermoplastic impeller and cover
  • Upper sleeve and lower heavy duty ball bearing construction
  • Motor is permanently lubricated for extended service life
  • Powered for continuous operation
  • All ratings are within the working limits of the motor
  • Quick disconnect power cord, heavy duty 16/3 SJTW with NEMA three prong
  • Complete unit is heavy duty, portable and compact
  • Mechanical seal is carbon, ceramic, BUNA and stainless steel
  • Stainless steel fasteners
  • Built-in thermal overload pro-tection with automatic reset
  • Class B insulation
  • Oil-filled design
  • High strength carbon steel shaft
BrandGoulds
Mfg. NumberGWP1214
Model NumberGWP
Product TypeSewage pump package
ApplicationSewage / dewatering
Pump ModelPS51A1
OperationAutomatic
Float Switch StyleT-spliced wide angle
Horsepower1/2 HP
Voltage115 Volts
Phase1
Discharge Connection2" NPT
Maximum Flow130 gpm
Maximum Head27 ft
Maximum Solids Handling2"
Basin MaterialRibbed Polyethylene
Basin Diameter23"
Basin Height30"
Cover MaterialStructural foam
Cover Diameter18"
Check Valve ModelA9-2P
Check Valve Type2" compression
Discharge Pipe Diameter2"
Discharge Pipe Length30"


Goulds assembled sewage/wastewater packages are perfect for use in homes, rural water districts, parks, sewage lift stations, waste drainage in new additions below the sewer line and in any application where waste or drainage must be disposed of quickly, quietly and efficiently. Fully assembled at the factory for simplified installation, these packages can move wastewater containing solids up to 2" in diameter. Two main package types, differentiated by basin are featured below. The GWP 18" x 30" uses a roll top polyethylene basin with a corrosion resistant structural foam cover, a usable capacity of 14 gallons and a thermoplastic 4" uniseal inlet grommet. The GWP 23" x 30" is comprised of a ribbed polyethylene basin with a corrosion resistant structural foam cover, a usable capacity of 24.8 gallons and a molded-in slip fit 4" inlet hub (clamps not included). Common features between the two series include:

  • Choice of pump: PV Vortex, PS Non-clog or WW05 Vortex (see charts below for pump performance)
  • Pre-installed schedule 40 2" PVC discharge pipe with 1/8" bleed hole
  • Factory preset mechanical float switch (T-Spliced/Piggyback/Wide Angle/Vertical available in various permutations)
  • Torque stop insert to stabilize the pump
  • A9-2PH or A9-2P check valve

All in all, these comprehensive packages include all the necessary components for your wastewater system to run smoothly and efficiently.

GOULDS ASSEMBLED SEWAGE SYSTEM PACKAGES

Model Comparison Chart

Model Pump Discharge HP Voltage Phase Dimensions Check Valve Float Switch
GWP2214 PS51A1 2" NPT 1/2 115 1 18" x 30" 2" Compression 10' T-Spliced Wide Angle
GWP1124 PS41A1 2" NPT 4/10 115 1 23" x 30" 2" Rubber Sleeve 10' T-Spliced Wide Angle
GWP1123 PS51A1 2" NPT 4/10 115 1 23" x 30" 2" Rubber Sleeve 10' T-Spliced Wide Angle
GWP2123 PS41AV 2" NPT 4/10 115 1 18" x 30" 2" Rubber Sleeve 10' T-Spliced Vertical
GWP2124 PS41A1 2" NPT 4/10 115 1 18" x 30" 2" Compression 10' T-Spliced Wide Angle
GWP1113 PS51AV 2" NPT 1/2 115 1 23" x 30" 2" Rubber Sleeve 10' T-Spliced Vertical
GWP1114 PS51A1 2" NPT 1/2 115 1 23" x 30" 2" Rubber Sleeve 10' T-Spliced Wide Angle
GWP1224 PS41A1 2" NPT 4/10 115 1 23" x 30" 2" Compression 10' T-Spliced Vertical
GWP2113 PS51AV 2" NPT 1/2 115 1 18" x 30" 2" Rubber Sleeve 10' T-Spliced Vertical
GWP2114 PS51A1 2" NPT 1/2 115 1 18" x 30" 2" Rubber Sleeve 10' T-Spliced Wide Angle
GWP1223 PS41AV 2" NPT 4/10 115 1 18" x 30" 2" Compression 20' Piggyback Wide Angle
GWP2121 PS41P1F 2" NPT 4/10 115 1 23" x 30" 2" Rubber Sleeve 10' T-Spliced Vertical
GWP2223 PS41AV 2" NPT 4/10 115 1 18" x 30" 2" Compression 10' T-Spliced Vertical
GWP2224 PS41A1 2" NPT 4/10 115 1 18" x 30" 2" Compression 10' T-Spliced Wide Angle
GWP2144 PV51A1 2" NPT 1/2 115 1 18" x 30" 2" Rubber Sleeve 10' T-Spliced Wide Angle
GWP1121 PS41P1F 2" NPT 4/10 115 1 23" x 30" 2" Rubber Sleeve 20' Piggyback Wide Angle
GWP1144 PV51A1 2" NPT 1/2 115 1 23" x 30" 2" Rubber Sleeve 10' T-Spliced Wide Angle
GWP2145 PV51P1 2" NPT 1/2 115 1 18" x 30" 2" Rubber Sleeve 10' Piggyback Wide Angle
GWP2143 PV51AV 2" NPT 1/2 115 1 18" x 30" 2" Rubber Sleeve 10' T-Spliced Vertical
GWP1213 PS51AV 2" NPT 1/2 115 1 23" x 30" 2" Compression 10' T-Spliced Vertical
GWP1214 PS51A1 2" NPT 1/2 115 1 23" x 30" 2" Compression 10' T-Spliced Wide Angle
GWP2111 PS51P1F 2" NPT 1/2 115 1 18" x 30" 2" Rubber Sleeve 20' Piggyback Wide Angle
GWP1145 PV51P1 2" NPT 1/2 115 1 23" x 30" 2" Rubber Sleeve 10' Piggyback Wide Angle
GWP1143 PV51AV 2" NPT 1/2 115 1 23" x 30" 2" Rubber Sleeve 10' T-Spliced Vertical
GWP2122 PS42P1F 2" NPT 4/10 230 1 18" x 30" 2" Rubber Sleeve 20' Piggyback Wide Angle
GWP2214 PS51A1 2" NPT 1/2 115 1 18" x 30" 2" Compression 10' T-Spliced Wide Angle
GWP2213 PS51AV 2" NPT 1/2 115 1 18" x 30" 2" Compression 10' T-Spliced Vertical
GWP1111 PS51P1F 2" NPT 1/2 115 1 23" x 30" 2" Rubber Sleeve 20' Piggyback Wide Angle
GWP2221 PS41P1F 2" NPT 4/10 115 1 18" x 30" 2" Compression 20' Piggyback Wide Angle
GWP1122 PS42P1F 2" NPT 4/10 230 1 18" x 30" 2" Rubber Sleeve 20' Piggyback Wide Angle
GWP2244 PV51A1 2" NPT 1/2 115 1 18" x 30" 2" Compression 10' T-Spliced Wide Angle
GWP1221 PS41P1F 2" NPT 4/10 115 1 23" x 30" 2" Compression 20' Piggyback Wide Angle
GWP1244 PV51A1 2" NPT 1/2 115 1 23" x 30" 2" Compression 10' T-Spliced Wide Angle
GWP2141 PV51P1F 2" NPT 1/2 115 1 18" x 30" 2" Rubber Sleeve 20' Piggyback Wide Angle
GWP2112 PS52P1F 2" NPT 1/2 230 1 18" x 30" 2" Rubber Sleeve 20' Piggyback Wide Angle
GWP2245 PV51P1 2" NPT 1/2 115 1 18" x 30" 2" Compression 10' Piggyback Wide Angle
GWP2243 PV51AV 2" NPT 1/2 115 1 18" x 30" 2" Compression 10' T-Spliced Vertical
questions

Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order

Inspector Pumphead & Our Customer Service Representatives Are Available

Mon-Fri 7:30 am to 5:00 pm EST

Call Toll Free: 800-429-0800

"Ask Inspector PumpHead"

*Note: Picture is illustrative and may not reflect the actual product.*