Goulds GWP2123, Preassembled Simplex Sewage Package With PS41AV Pump, 0.4 HP, 115 Volts, 1 Phase, 2" NPT Discharge, (18" x 30") Polyethylene Basin, 18" Structural Foam Cover, 2" Rubber Sleeve Check Valve
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds GWP (18" x 30") Sewage Pump Package
Fully assembled at the factory for simplified installation and designed for dewatering wastewater containing solids up to 2", this pump package is ideal for:
- Homes
- Rural water districts
- Parks
- Sewage lift stations
- Waste drainage in new additions below sewer line
- Anywhere waste or drainage must be disposed of quickly, quietly and efficiently
Package includes:
- Pump, model PS41AV with T-spliced vertical float switch
- Basin (18" diameter x 30" high) with 4" inlet grommet and pump torque stop insert
- Cover with bolts, sealing tape, (2) 2", (1) 3" vent and discharge grommets
- 2" rubber sleeve check valve, model A9-2PH
- Discharge pipe, (2" diameter x 30" long) schedule 40 PVC
Package Features
- Structural foam cover is strong and corrosion resistant
- Vent grommets for both 2" and 3" vent provided to add system flexibility and reduce inventory
- Thermoplastic 4" uniseal inlet grommet
- Factory preset mechanical float switch for dependable automatic operation
- Torque stop insert to stabilize the pump
- Schedule 40, 2" PVC discharge pipe with 1/8" bleed hole is factory installed
- Roll top polyethylene basin with 14 gallons capacity and 4" inlet grommet
Pump PS41AV Features
- 0.4 HP, 115 Volts, single phase
- 2" NPT discharge
- Passes up to 2" spherical solids
- Maximum capacity is 110 GPM
- Maximum head is 23 feet
- Corrosion resistant construction
- Cast iron body
- Thermoplastic impeller and cover
- Upper sleeve and lower heavy duty ball bearing construction
- Motor is permanently lubricated for extended service life
- Powered for continuous operation
- All ratings are within the working limits of the motor
- Quick disconnect power cord, heavy duty 16/3 SJTW with NEMA three prong
- Complete unit is heavy duty, portable and compact
- Mechanical seal is carbon, ceramic, BUNA and stainless steel
- Stainless steel fasteners
- Built-in thermal overload pro-tection with automatic reset
- Class B insulation
- Oil-filled design
- High strength carbon steel shaft
Note: Photo is illustrative and may not reflect the actual product.
Elevator Sump Kits and Components Technical Brochure.pdf
GWP Plumbers Wastewater Package Systems Repair Parts.pdf
GWP18x30 Assembled Wastewater Packages Technical Brochure.pdf
Elevator Sump Pump Kits - Oil Smart Sales Sheet Brochure.pdf
GWP23x30 Assembled Wastewater Packages Technical Brochure.pdf
24x24 Basin Assembly Brochure.pdf
Brand | Goulds |
Mfg. Number | GWP2123 |
Model Number | GWP |
Product Type | Sewage pump package |
Application | Sewage, sump, dewatering |
Pump Model | PS41AV |
Operation | Automatic |
Float Switch Style | T-spliced vertical |
Horsepower | 0.4 HP |
Voltage | 115 Volts |
Phase | 1 |
Discharge Connection | 2" NPT |
Maximum Flow | 110 gpm |
Maximum Head | 23 ft |
Maximum Solids Handling | 2" |
Basin Material | Roll top polyethylene |
Basin Diameter | 18" |
Basin Height | 30" |
Cover Material | Structural foam |
Cover Diameter | 18" |
Check Valve Model | A9-2PH |
Check Valve Type | 2" rubber sleeve |
Discharge Pipe Diameter | 2" |
Discharge Pipe Length | 30" |
Goulds assembled sewage/wastewater packages are perfect for use in homes, rural water districts, parks, sewage lift stations, waste drainage in new additions below the sewer line and in any application where waste or drainage must be disposed of quickly, quietly and efficiently. Fully assembled at the factory for simplified installation, these packages can move wastewater containing solids up to 2" in diameter. Two main package types, differentiated by basin are featured below. The GWP 18" x 30" uses a roll top polyethylene basin with a corrosion resistant structural foam cover, a usable capacity of 14 gallons and a thermoplastic 4" uniseal inlet grommet. The GWP 23" x 30" is comprised of a ribbed polyethylene basin with a corrosion resistant structural foam cover, a usable capacity of 24.8 gallons and a molded-in slip fit 4" inlet hub (clamps not included). Common features between the two series include:
- Choice of pump: PV Vortex, PS Non-clog or WW05 Vortex (see charts below for pump performance)
- Pre-installed schedule 40 2" PVC discharge pipe with 1/8" bleed hole
- Factory preset mechanical float switch (T-Spliced/Piggyback/Wide Angle/Vertical available in various permutations)
- Torque stop insert to stabilize the pump
- A9-2PH or A9-2P check valve
All in all, these comprehensive packages include all the necessary components for your wastewater system to run smoothly and efficiently.
GOULDS ASSEMBLED SEWAGE SYSTEM PACKAGES |
Model Comparison Chart
Model | Pump | Discharge | HP | Voltage | Phase | Dimensions | Check Valve | Float Switch |
GWP2214 | PS51A1 | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Compression | 10' T-Spliced Wide Angle |
GWP1124 | PS41A1 | 2" NPT | 4/10 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 10' T-Spliced Wide Angle |
GWP1123 | PS51A1 | 2" NPT | 4/10 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 10' T-Spliced Wide Angle |
GWP2123 | PS41AV | 2" NPT | 4/10 | 115 | 1 | 18" x 30" | 2" Rubber Sleeve | 10' T-Spliced Vertical |
GWP2124 | PS41A1 | 2" NPT | 4/10 | 115 | 1 | 18" x 30" | 2" Compression | 10' T-Spliced Wide Angle |
GWP1113 | PS51AV | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 10' T-Spliced Vertical |
GWP1114 | PS51A1 | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 10' T-Spliced Wide Angle |
GWP1224 | PS41A1 | 2" NPT | 4/10 | 115 | 1 | 23" x 30" | 2" Compression | 10' T-Spliced Vertical |
GWP2113 | PS51AV | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Rubber Sleeve | 10' T-Spliced Vertical |
GWP2114 | PS51A1 | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Rubber Sleeve | 10' T-Spliced Wide Angle |
GWP1223 | PS41AV | 2" NPT | 4/10 | 115 | 1 | 18" x 30" | 2" Compression | 20' Piggyback Wide Angle |
GWP2121 | PS41P1F | 2" NPT | 4/10 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 10' T-Spliced Vertical |
GWP2223 | PS41AV | 2" NPT | 4/10 | 115 | 1 | 18" x 30" | 2" Compression | 10' T-Spliced Vertical |
GWP2224 | PS41A1 | 2" NPT | 4/10 | 115 | 1 | 18" x 30" | 2" Compression | 10' T-Spliced Wide Angle |
GWP2144 | PV51A1 | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Rubber Sleeve | 10' T-Spliced Wide Angle |
GWP1121 | PS41P1F | 2" NPT | 4/10 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 20' Piggyback Wide Angle |
GWP1144 | PV51A1 | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 10' T-Spliced Wide Angle |
GWP2145 | PV51P1 | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Rubber Sleeve | 10' Piggyback Wide Angle |
GWP2143 | PV51AV | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Rubber Sleeve | 10' T-Spliced Vertical |
GWP1213 | PS51AV | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Compression | 10' T-Spliced Vertical |
GWP1214 | PS51A1 | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Compression | 10' T-Spliced Wide Angle |
GWP2111 | PS51P1F | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Rubber Sleeve | 20' Piggyback Wide Angle |
GWP1145 | PV51P1 | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 10' Piggyback Wide Angle |
GWP1143 | PV51AV | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 10' T-Spliced Vertical |
GWP2122 | PS42P1F | 2" NPT | 4/10 | 230 | 1 | 18" x 30" | 2" Rubber Sleeve | 20' Piggyback Wide Angle |
GWP2214 | PS51A1 | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Compression | 10' T-Spliced Wide Angle |
GWP2213 | PS51AV | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Compression | 10' T-Spliced Vertical |
GWP1111 | PS51P1F | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Rubber Sleeve | 20' Piggyback Wide Angle |
GWP2221 | PS41P1F | 2" NPT | 4/10 | 115 | 1 | 18" x 30" | 2" Compression | 20' Piggyback Wide Angle |
GWP1122 | PS42P1F | 2" NPT | 4/10 | 230 | 1 | 18" x 30" | 2" Rubber Sleeve | 20' Piggyback Wide Angle |
GWP2244 | PV51A1 | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Compression | 10' T-Spliced Wide Angle |
GWP1221 | PS41P1F | 2" NPT | 4/10 | 115 | 1 | 23" x 30" | 2" Compression | 20' Piggyback Wide Angle |
GWP1244 | PV51A1 | 2" NPT | 1/2 | 115 | 1 | 23" x 30" | 2" Compression | 10' T-Spliced Wide Angle |
GWP2141 | PV51P1F | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Rubber Sleeve | 20' Piggyback Wide Angle |
GWP2112 | PS52P1F | 2" NPT | 1/2 | 230 | 1 | 18" x 30" | 2" Rubber Sleeve | 20' Piggyback Wide Angle |
GWP2245 | PV51P1 | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Compression | 10' Piggyback Wide Angle |
GWP2243 | PV51AV | 2" NPT | 1/2 | 115 | 1 | 18" x 30" | 2" Compression | 10' T-Spliced Vertical |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An OrderInspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.* |