Sta-Rite HPS7C-01, High Pressure Booster Pump, HPS Series, 1/2 HP, 7 GPM, 115/230 Volts, 1 Phase, Stainless Steel
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Sta Rite High Pressure Booster Pump
This high pressure booster pump is one of the most durable booster pumps available. The SignaSeal floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal, or pump hydraulic components.
Features
- Proven SignaSeal staging system utilizes a ceramic wear surface that dominates with 1st-in-class performance.
- Superior sand-handling and thrust management staging system
- Precision-molded acetal impellers for perfect balance
- Ultra-smooth for highest performance and efficiency
- Precision-molded diffusers offer superior performance with high resistance to corrosion and abrasion
- Precision lapped and highly polished carbon-ceramic mechanical shaft seal with stainless steel parts guarantees continuous water lubrication
- Superior motor winding insulation materials protect against excessive moisture and contaminants assuring prolonged motor life
- Precision rotor is die-cast under high pressures for uniform performance and greater efficiency
- All electrical components are protected from dirt, dust, and insects by a dustproof canopy which the ventilating air cannot contaminate
The Sta-Rite HPS series stainless steel booster pumps are built for car wash, filtration, reverse osmosis, pressure washing (residential, commercial or agricultural), booster and spray systems, HVAC systems and general purpose pumping applications. These pumps are among the most durable booster pumps available. The SignaSealTM floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal, or pump hydraulic components. Not rated for domestic water use. Features:
- Proven SignaSeal staging system utilizes a ceramic wear surface that dominates with 1st-in-class performance.
- Superior sand-handling and thrust management staging system
- Precision-molded acetal impellers for perfect balance. Ultra-smooth for highest performance and efficiency
- Precision-molded diffusers offer superior performance with high resistance to corrosion and abrasion
- Precision lapped and highly polished carbon-ceramic mechanical shaft seal with stainless steel parts guarantees continuous water lubrication
- Superior motor winding insulation materials protect against excessive moisture and contaminants assuring prolonged motor life
- Precision rotor is die-cast under high pressures for uniform performance and greater efficiency
- All electrical components are protected from dirt, dust, and insects by a dustproof canopy which the ventilating air cannot contaminate
STA-RITE HPS SERIES BOOSTER PUMPS |
Model Comparison Chart
Model | HP | Voltage | Phase | GPM | Max. Working PSI | Stages |
HPS10C-0 | 1/2 | 115/230 | 1 | 10 | 315 | 6 |
HPS7C-01 | 1/2 | 115/230 | 1 | 7 | 315 | 7 |
HPS20E3-01 | 1 | 208-230/460 | 3 | 20 | 315 | 7 |
HPS10C3-01 | 1/2 | 208-230/460 | 3 | 10 | 315 | 6 |
HPS10D-01 | 3/4 | 115230 | 1 | 10 | 315 | 8 |
HPS7D-01 | 3/4 | 115230 | 1 | 7 | 315 | 12 |
HPS20E-01 | 1 | 115230 | 1 | 20 | 315 | 7 |
HPS7C3-01 | 1/2 | 208-230/460 | 3 | 7 | 315 | 9 |
HPS10E-01 | 1 | 115/230 | 1 | 10 | 315 | 10 |
HPS7D3-01 | 3/4 | 208-230/460 | 1 | 7 | 315 | 12 |
HPS10D3-01 | 3/4 | 208-230/460 | 3 | 10 | 315 | 8 |
HPS7E-01 | 1 | 115/230 | 1 | 7 | 315 | 16 |
HPS10E3-01 | 1 | 208-230/460 | 3 | 10 | 315 | 10 |
HPS7E3-01 | 1 | 208-230/460 | 3 | 7 | 315 | 16 |
HPS20F-01 | 1-1/2 | 230 | 1 | 20 | 315 | 9 |
HPS20F3-01 | 1-1/2 | 208-230/460 | 3 | 20 | 315 | 9 |
HPS30F-0 | 1-1/2 | 230 | 1 | 30 | 315 | 6 |
HPS30F3-01 | 1-1/2 | 208-230/460 | 3 | 30 | 315 | 6 |
HPS10F-01 | 1-1/2 | 230 | 1 | 10 | 315 | 14 |
HPS10F3-01 | 1-1/2 | 208-230/460 | 3 | 10 | 315 | 14 |
HPS20HG3-01 | 1-1/2 | 208-230/460 | 3 | 20 | 315 | 15 |
HPS20G-01 | 2 | 230 | 1 | 20 | 315 | 9 |
HPS30G-01 | 2 | 230 | 1 | 30 | 315 | 7 |
HPS20G3-01 | 2 | 208-230/460 | 3 | 20 | 315 | 11 |
HPS10G-01 | 2 | 230 | 1 | 10 | 315 | 16 |
HPS30G3-01 | 2 | 230 | 3 | 30 | 315 | 7 |
HPS20HG-01 | 2-1/2 | 230 | 1 | 20 | 315 | 15 |
HPS10G3-01 | 2 | 208-230/460 | 3 | 10 | 315 | 16 |
HPS30HG3-01 | 2-1/2 | 208-230/460 | 3 | 30 | 315 | 11 |
HPS30HG-01 | 2-1/2 | 230 | 1 | 30 | 315 | 11 |
HPS20H-01 | 3 | 208-230 | 1 | 20 | 315 | 15 |
HPS30H-01 | 3 | 208-230 | 1 | 30 | 315 | 11 |
HPS20H3-01 | 3 | 200-230/460 | 3 | 20 | 315 | 15 |
HPS30H3-01 | 3 | 200-230/460 | 3 | 30 | 315 | 11 |
PUMP PERFORMANCE |
CISTERN/SHALLOW WELL INSTALLATION |
WALL-MOUNTED INSTALLATION |
IMPELLER STACK CHANGEOUT |
MECHANICAL SEAL CHANGEOUT |
DIMENSIONAL DATA |
REPAIR PARTS |
OPERATION |
MANUAL |
Sta-Rite HPS Series Owner's Manual |
SPECIFICATIONS |
Sta-Rite HPS Series Specifications |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*