Sta-Rite DPC, Self-Priming Utility Pump, DPC Series, 1/2 HP, 115 Volts, 1 Phase, 1-1/4" NPT Discharge, 1-1/4" NPT Suction, Polycarbonate Impeller, 43 GPM Max., 62 ft. Max. Head, Cast Iron Body, 10 ft. Cord
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Sta-Rite DPC Series Self-Priming Centrifugal Pump
This is a rugged cast iron pump is capable of priming up to 20 ft. vertically and will handle solids up to 0.225" diameter. The unit is equipped with a 1/2 HP 115-volt motor and features 1-1/4" suction and discharge.
Features
-
Cast iron volute
-
Polycarbonate impeller
-
Thermoset diffuser
-
One-piece threaded stainless steel shaft
-
Steel 12 gauge base
-
Maximum liquid temperature limit of 130°F (55°C)
-
Motor is 1/2 HP, 3450 RPM, 115-volt split phase, 60 Hz. Built-in thermal overload protection with automatic reset
-
Mechanical seal is made of Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal part
-
Shielded, permanently lubricated, heavy-duty bearings, extensively tested to ensure extended life and smooth, quiet operation
-
Comes complete with built-in overload protection with automatic reset and a built-in check valve
-
10 ft., 115 volt power cord
-
Effluent removal
-
Wastewater removal
-
Sump drainage
-
Dewatering
-
Circulation
-
Fountains
Brand | Sta-Rite |
Mfg. Number | DPC |
Series | DPC Series |
Product Type | Utility pump |
Application | Effluent/wastewater/dewater |
Horsepower | 1/2 HP |
Voltage | 115 volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 3450 RPM |
Design | Self-priming |
Suction Connection | 1-1/4" NPT |
Discharge Connection | 1-1/4" NPT |
Maximum Capacity | 43 GPM |
Maximum TDH | 62 ft. |
Max. Solid Size | 0.225" |
Impeller Material | Polycarbonate |
Pump Casing Material | Cast iron |
Motor Shaft Material | Stainless steel |
Shaft Seal | Carbon-ceramic/Stainless steel/Buna-N |
Overload Protection | Yes |
Max. Temperature | 130°F |
Cord Length | 10 ft. |
The Sta-Rite DPC series lawn/irrigation centrifugal pumps are designed for use in effluent/wastewater removal, sump drainage, dewatering, circulation and fountain applications. Each pump is self-priming and can handle solids up to 0.225" in diameter. Features:
-
Cast iron volute
-
Polycarbonate impeller
-
Thermoset diffuser
-
One-piece threaded stainless steel shaft
-
Steel 12 gauge base
-
Maximum liquid temperature limit of 130°F (55°C)
-
Motor is 1/2 HP, 3450 RPM, 115-volt split phase, 60 Hz. Built-in thermal overload protection with automatic reset
-
Mechanical seal is made of Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal part
-
Shielded, permanently lubricated, heavy-duty bearings, extensively tested to ensure extended life and smooth, quiet operation
-
Comes complete with built-in overload protection with automatic reset and a built-in check valve
-
10' 115 volt power cord
STA-RITE DPC SERIES LAWN AND IRRIGATION PUMPS |
Model Comparison Chart
Model | Suction | Discharge | HP | Voltage | Phase | Max. GPM | Max. Head | Impeller | Cord |
DPC | 1-1/4" NPT | 1-1/4" NPT | 1/2 | 115 | 1 | 43 | 62' | Polycarbonate | 10' |
PUMP PERFORMANCE |
RECOMMENDED INSTALLATIONS |
REPAIR PARTS |
MANUAL |
Sta-Rite DPC Series Owner's Manual |
SPECIFICATIONS |
Sta-Rite DPC Series Specifications |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*