Sta-Rite PLF-2L, Convertible Deep Well Jet Pump, PL Series, 1-1/2 HP, 115/230 Volts, 1 Phase, 1" NPT Discharge, 1-1/4" NPT Suction, Fiberglass Reinforced Thermoplastic Body, 54-64 PSI Shut-Off Pressure
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Sta-Rite PL Series Convertible Deep Weel Jet Pump
- Pump rustproof constructed body is Dura-Glas fiberglass reinforced thermoplastic—lightweight, rustproof and exceptionally strong. All components in contact with water are resistant to the corrosive and abrasive forces found in the most aggressive water conditions
- Precision-molded Noryl impeller gives perfect balance and ultra-smoothness for highest performance and efficiency
- Noryl Nozzle
- Noryl Venturi
-
Buna-N O-ringStainless steel heat sink provides maximum cooling of the mechanical shaft seal
- Heavy-duty motor has a dustproof canopy which completely encloses electrical components and provides dust, dirt and insect protection. Ventilating air cannot contaminate vital switching components. Permanently lubricated, heavy-duty ball bearings ensure smooth, quiet operation and extended motor life
- Precision Diffuser has a multi-port, reinforced polypropylene with brass wear ring design, primes faster and handles more air
- Shallow well jet is sold separately
- Pressure Switch Pre-Set at 30–50 PSI
- Suction-over-drive suction ports
- Performance-proven, simple, built-in pressure regulator is adjustable for best performance on all deep well installations. Pressure gauge included.
- Easy Serviceability: PL pumps are disassembled by removing the stainless steel clamp. Piping does not have to be disturbed. Seal replacement takes only a few minutes. “Control room” motor design makes all components easily accessible
- Water systems
- Sprinkling
- Homes
- Farms
- Cottages
Brand | Sta-Rite |
Mfg. Number | PLF-2L |
Series | PL Series |
Product Type | Convertible Deep Well Jet Pump |
Application | Water Systems & Sprinkling |
Horsepower | 1-1/2 HP |
Voltage | 115/230 volts |
Phase | 1 |
Frequency | 60 Hz |
Suction Connection | 1-1/4" NPT |
Discharge Connection | 1" NPT |
Impeller Material | Noryl |
Pump Casing Material | Dura-Glas, Fiberglass reinforced thermoplastic |
Motor Shaft Material | Stainless Steel |
Shaft Seal | Carbon-Ceramic/Stainless Steel |
Pressure Switch Setting | 30-50 PSI |
Shut-Off Pressure | 54-64 PSI |
The Sta-Rite PL series convertible jet pumps are corrosion resistant pumps built for water systems, sprinkling systems and various applications in homes, farms and cottages. Each pump is made of durable fiberglass reinforced thermoplastic, ensuring years of trouble-free installation. Features
- Pump rustproof constructed body is Dura-Glas fiberglass reinforced thermoplastic—lightweight, rustproof and exceptionally strong. All components in contact with water are resistant to the corrosive and abrasive forces found in the most aggressive water conditions
- Precision-molded Noryl impeller gives perfect balance and ultra-smoothness for highest performance and efficiency
- Noryl Nozzle
- Noryl Venturi
- Buna-N O-ring
- Stainless steel heat sink provides maximum cooling of the mechanical shaft seal
- Heavy-duty motor has a dustproof canopy which completely encloses electrical components and provides dust, dirt and insect protection. Ventilating air cannot contaminate vital switching components. Permanently lubricated, heavy-duty ball bearings ensure smooth, quiet operation and extended motor life
- Precision Diffuser has a multi-port, reinforced polypropylene with brass wear ring design, primes faster and handles more air
- Shallow well jet is sold separately
- Pressure Switch Pre-Set at 30–50 PSI
- Suction-over-drive suction ports
- Performance-proven, simple, built-in pressure regulator is adjustable for best performance on all deep well installations. Pressure gauge included.
- Easy Serviceability: PL pumps are disassembled by removing the stainless steel clamp. Piping does not have to be disturbed. Seal replacement takes only a few minutes. “Control room” motor design makes all components easily accessible
Please notethat if using this pump for NEW INSTALLATIONS, a jet assembly package must be purchased separately (see brochure in Manuals tab for choosing the appropriate jet assembly).
STA-RITE PL SERIES CONVERTIBLE JET PUMPS |
Model Comparison Chart
Model | Discharge | Suction | Drive | HP | Voltage | Phase | Shut-Off Pressure | Approx. Weight |
PLC-2L | 1" NPT | 1-1/4" NPT | 1" NPT | 1/2 | 115/230 | 1 | 62-72 PSI | 27 lbs. |
PLD-2L | 1" NPT | 1-1/4" NPT | 1" NPT | 3/4 | 115/230 | 1 | 52-62 PSI | 28 lbs. |
PLE-2L | 1" NPT | 1-1/4" NPT | 1" NPT | 1 | 115/230 | 1 | 52-62 PSI | 30 lbs. |
PLF-2L | 1" NPT | 1-1/4" NPT | 1" NPT | 1-1/2 | 115/230 | 1 | 54-64 PSI | 36 lbs. |
PERFORMANCE RATINGS |
TYPICAL INSTALLATION |
DIMENSIONAL DATA |
REPAIR PARTS |
SPECIFICATIONS |
Sta-Rite PL Series Specifications |
MANUAL |
Sta-Rite PL Series Manual |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*