Sta-Rite SND-L, Self-Priming Shallow Well Jet Pump, SN Series, 3/4 HP, 115/230 Volts, 1 Phase, 1" NPT Discharge, 1-1/4" NPT Suction, 15 GPM Max., 162 ft. Max. Head, 70 PSI Shut-Off Pressure, Cast Iron Body
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Sta Rite ProJet SN Series Self-Priming Shallow Well Jet Pump
This is a self-priming shallow well pump that provides excellent performance with good pressure for wells to 25' deep. Selfpriming after the priming chamber has been filled with water.
Features
-
Quality constructed close-grained cast iron body. Drain port provided for easy winterizing
-
Built-in Jet: High-strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Cleanout plug provided for ease of service
-
Precision-molded, Noryl impeller for perfect balance and ultra-smooth for highest performance and efficiency
-
Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser
-
Mechanical shaft seal is precision lapped and highly polished carbon-ceramic, 416 grade stainless steel construction. Internal design guarantees continuous water lubrication
-
Motor windings are made of superior insulation materials protect against excessive moisture and contaminants, assuring prolonged motor life
-
Rotor is diecast under high pressures for uniform performance and greater efficiency, dynamically balanced
-
Heavy-duty ball bearings are shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation
-
Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment
-
All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components
-
Professional quality pressure switch, allows cut-in adjustments
-
Max. Liquid Temperature: 140°F
-
Max. Inlet Pressure: 50 PSI
-
Average Priming Time (in minutes) at 15 Feet:SNC = 2.3; SND = 1.7SNE = 1.3; SNF = 1.1
-
Average Priming Time (in minutes) at 25 Feet:SNC = 6.4; SND = 4.4SNE = 4.4; SNF = 2.6
-
Steel, 12 gauge base
- Water systems
- Sprinkling
- Homes
- Farms
- Cottages
Brand | Sta-Rite |
Mfg. Number | SND-L |
Series | SN Series |
Product Type | Shallow Well Jet Pump |
Application | Water Systems |
Horsepower | 3/4 HP |
Voltage | 115/230 volts |
Phase | 1 |
Frequency | 60 Hz |
Design | Self-priming |
Suction Connection | 1-1/4" NPT |
Discharge Connection | 1" NPT |
Maximum Capacity | 15 GPM Max. |
Maximum TDH | 162 ft. |
Shut-Off Pressure | 70 PSI |
Pressure Switch Setting | 30-50 PSI |
Max. Inlet Pressure | 50 PSI |
Impeller Material | Noryl |
Pump Casing Material | Cast Iron |
Motor Shaft Material | Stainless Steel |
Shaft Seal | Carbon-cereamic/stainless steel |
Max. Temperature | 140°F |
The Sta-Rite ProJet SN series pumps are corrosion and abrasion-resistant and are ideal for wells with pumping levels of 25' or less. These pumps are ideal for water and sprinkling systems in homes, farms and cottages. Self-priming after the pump housing is initially filled with water. Features:
-
Quality constructed close-grained cast iron body. Drain port provided for easy winterizing
-
Built-in Jet: High-strength Lexan nozzle and venturi for maximum resistance to corrosion and abrasion. Cleanout plug provided for ease of service
-
Precision-molded, Noryl impeller for perfect balance and ultra-smooth for highest performance and efficiency
-
Pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser
-
Mechanical shaft seal is precision lapped and highly polished carbon-ceramic, 416 grade stainless steel construction. Internal design guarantees continuous water lubrication
-
Motor windings are made of superior insulation materials protect against excessive moisture and contaminants, assuring prolonged motor life
-
Rotor is diecast under high pressures for uniform performance and greater efficiency, dynamically balanced
-
Heavy-duty ball bearings are shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation
-
Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive and alignment
-
All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate vital switching components
-
Professional quality pressure switch, allows cut-in adjustments
-
Max. Liquid Temperature: 140°F
-
Max. Inlet Pressure: 50 PSI
-
Average Priming Time (in minutes) at 15 Feet:SNC = 2.3; SND = 1.7SNE = 1.3; SNF = 1.1
- Average Priming Time (in minutes) at 25 Feet: SNC = 6.4; SND = 4.4< SNE = 4.4; SNF = 2.6
- Steel, 12 gauge base
STA-RITE SN SERIES SHALLOW WELL JET PUMPS |
Model Comparison Chart
Model | Discharge | Suction | HP | Voltage | Phase | Approx. Weight | Switch Setting |
SNC-5L | 1" NPT | 1-1/4" NPT | 1/2 | 115/230 | 1 | 45 lbs. | 30-50 PSI |
SNC-L | 1" NPT | 1-1/4" NPT | 1/2 | 115/230 | 1 | 45 lbs. | 30-50 PSI |
SNC-HF25L | 1" NPT | 1-1/4" NPT | 1/2 | 115/230 | 1 | 45 lbs. | 20-40 PSI |
SND-L | 1" NPT | 1-1/4" NPT | 3/4 | 115/230 | 1 | 47 lbs. | 30-50 PSI |
SNE-L | 1" NPT | 1-1/4" NPT | 1 | 115/230 | 1 | 55 lbs. | 30-50 PSI |
SNF-L | 1" NPT | 1-1/4" NPT | 1-1/2 | 115/230 | 1 | 60 lbs. | 30-50 PSI |
PERFORMANCE RATINGS |
TYPICAL INSTALLATION |
DIMENSIONAL DATA |
REPAIR PARTS |
BROCHURE |
Sta-Rite SN Series Brochure |
MANUAL |
Sta-Rite SN Series Owner's Manual |
INSTRUCTIONS |
Sta-Rite Well Pump Pressure Switch Instructions |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*