Zoeller 282-0071, Model DX282, X280 Series, Explosion Proof Sewage Pump with Mechanical Float Switch, 1/2 HP, 230 Volts, 1 Phase, 2" NPT Flange Vertical Discharge, 127 GPM Max, 26 ft Max Head, 20 ft Cord, Automatic
Zoeller 282-0071, Model DX282, X280 Series, Explosion Proof Sewage Pump with Mechanical Float Switch, 1/2 HP, 230 Volts, 1 Phase, 2" NPT Flange Vertical Discharge, 127 GPM Max, 26 ft Max Head, 20 ft Cord, Automatic
SKU #: 282-0071
Brand: Zoeller
Available For Order! ((Usually Ships 3-5 Days))This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T. FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Some manufacturers require internet retailers to display a price at or above manufacturers established MAP ("Minimum Advertised Price").
Since our price for this product is lower than MAP, the manufacturer does not allow us to display our lowest price until you place the product in the shopping cart. This allows us to continue offering our lowest prices while staying consistent with product manufacturers policy.
This process does not require you to purchase the product - it can be easily removed from shopping cart if needed.
Mon-Fri 7:00 am to 6:00 pm EST
Sat 8:00 am to 4:30 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
Our Friendly Staff At PumpProducts.com Can Assist You In Placing Your Order.
Sales Representatives Available!
Mon-Fri 7:00 am to 6:00 pm EST
Sat 8:00 am to 4:30 pm EST
This submersible pump is designed for use in residential or commercial wastewater applications in Class I, Division 1, Group and D locations. Each pump is FM/CSA approved and features innovative motor and
electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosure become ignited, the enclosure is engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions.
WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres.
Features
Corrosion-resistant, powder coated epoxy finish
Durable cast iron cover, motor adapter and pump housing
Stainless steel bolts, handle, guard and float rod guide, switch arm and actuator assembly
Stainless steel rotor shaft
Shaft Seal: stainless steel wetted parts, carbon and ceramic rotary face seal
Includes a stainless steel lifting bracket for easy installation and removal.
FM listed motor for Class I, Division 1, Group C & D environments
This series of submersible pumps is designed for use in residential or commercial wastewater applications in Class I, Division 1, Group and D environments. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosure become ignited, the enclosure is engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions.
WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres.
Features
Corrosion-resistant, powder coated epoxy finish
Durable cast iron cover, motor adapter and pump housing
Stainless steel bolts, handle, guard and float rod guide, switch arm and actuator assembly
Stainless steel rotor shaft
Includes a stainless steel lifting bracket for easy installation and removal
FM listed motor for Class I, Division 1, Group C & D environments
Motor - 1750 RPM, oil-filled, hermetically sealed, overload protection needs to be provided in control panel
Moisture sensors prewired in motor housing (functionality requires indicator circuit in panel)
Non-clogging cast iron vortex impeller design
Upper ball bearing and lower ball bearing running in bath of oil
Neoprene square ring seals used throughout
20 ft UL listed 8-wire neoprene cord
Sensor leads & power leads in one cord for easy installation
Maximum temperature for sewage or dewatering is104°F
Passes 2" spherical solids
Major width: 13-5/16"
Major height: 23-17/32"
100% computerized testing and 100% tested submerged in water
This model is also available with 25, 35 and 50 ft cord lengths
Control panel with intrinsically safe relays and moisture indicator is required
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are Available
Mon-Fri 7:30 am to 5:00 pm EST
Call Toll Free:
800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*
