Zoeller 818-0008, Model WH818, Grinder Pump, 1 HP, 200-208 Volts, 1 Phase, 1-1/4" Discharge, 42 GPM Max, 52 ft Max Head, 20 ft Cord, Automatic
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller Model WH818 Grinder Pump
"The Shark", is a uniquely designed single directional grinder pump with integral control.
Features
- Automatic model with Integral Control
- cCDAus listed
- Durable heavy-duty, finned cast iron construction
- Legs provided for free-standing installation
- Oil-filled, hermetically sealed motor with Class B insulation, automatic reset thermal overload protected
- Upper and lower ball bearings running in bath of oil
- Hardened stainless steel cutter and disc
- Cutters protected from abrasive solids
- Stainless steel lifting handle, screws and bolts
- Easily adapts to rail systems
- Mechanical shaft seal - carbon/ceramic
- Control panels not required
- Simplex grinder package systems (unassembled and job ready/assembled) available
- Corrosion-resistant, powder coated epoxy finish
- Maximum operating temperature: 130°F (54°C)
- 1 ¼” NPT vertical discharge
- Carbon/ceramic seal
- Thermal overload protection
- Balanced bronze impeller
- Stainless steel cutter plate/cutter
- Stainless steel shaft
- Stainless steel hardware
- 20' (6m) power cord
Applications
- Residential
- Commercial wastewater
- Wastewater transfer
- Unscreened raw sewage
Note: Image is illustrative and may not reflect details of actual product.
Brand | Zoeller |
Mfg. Number | WH818 |
Series | Shark 818 |
Product Type | Grinder pump |
Application | Wastewater applications |
Voltage | 200-208 Volts |
Operation | Automatic |
Horsepower | 2 HP |
Phase | 1 |
Current | 7.7 Amps |
Frequency | 60 Hz |
Speed | 3450 RPM |
Discharge Connection | 1-1/4" |
Insulation Class | Class B |
Maximum Flow | 42 GPM |
Maximum Total Head | 52 ft |
Impeller Design | Vortex |
Impeller Material | Engineered plastic |
Power Cord Length | 20 ft |
Overload Protections | Yes |
Maximum Fluid Temperature | 130°F |
The Zoeller 800 Series (or “The Shark” series) grinder pumps are light, efficient models used in residential systems. They can handle typical household waste solids such as sanitary products and handwipes. Some models include the “Tri-Slice” cutter technology with three independent cutting channels that provides over 250,000 cuts per minute. The hardened stainless steel Tri-Slice cutter provides scissor action style cutting that helps eliminate binding and roping of material around the cutter.
"The Shark", is a uniquely designed single directional grinder pump with integral control. These pumps are constructed of corrosion-resistant cast iron with a powder coated epoxy finish and stainless steel hardware. The thermally protected, oil-filled motors and external cooling fins allow the pumps to run cooler. This series is available in single phase and three phase configurations.
- Automatic model with integral control, nonautomatic available
- cCSAus listed
- Durable, heavy-duty, finned cast iron construction
- Legs provided for free-standing installation
- Oil-filled, hermetically-sealed motor with Class B insulation, automatic reset thermal overload protected
- Upper and lower ball bearings running in bath of oil
- Hardened stainless steel cutter and disc
- Cutters protected from abrasive solids
- Stainless steel lifting handle, screws and bolts
- Easily adapts to rail systems
- Mechanical shaft seal - carbon/ceramic
- Control panels not required
- Simplex grinder package systems (unassembled and job ready/assembled) available
- Corrosion-resistant, powder coated epoxy finish
- Maximum operating temperature: 130 °F (54 °C)
- Patent 8,562,287
Standard Features
- 1-1/4” NPT vertical discharge
- Carbon/ceramic seal
- Thermal overload protection
- Engineered plastic impeller
- Stainless steel cutter plate/cutter
- Stainless steel shaft
- Stainless steel hardware
- 20' (6 m) power cord, extra lengths available (consult factory)
ZOELLER 818, 819, 820 SERIES GRINDER PUMPS |
Model Comparison Chart
Model | Discharge (NPT) | HP | Voltage | Phase | GPM | Max. Head |
N818 | 1-1/4" | 2 | 115 | 1 | 42 | 52' |
E818 | 1-1/4" | 2 | 230 | 1 | 42 | 52' |
I818 | 1-1/4" | 2 | 200-208 | 1 | 42 | 52' |
BE818 | 1-1/4" | 2 | 230 | 1 | 42 | 52' |
WH818 | 1-1/4" | 2 | 200-208 | 1 | 42 | 52' |
WM818 | 1-1/4" | 2 | 115 | 1 | 42 | 52' |
WD818 | 1-1/4" | 2 | 230 | 1 | 42 | 52' |
BN818 | 1-1/4" | 2 | 115 | 1 | 42 | 52' |
E819 | 1-1/4" | 2 | 230 | 1 | 42 | 80' |
I819 | 1-1/4" | 2 | 200-208 | 1 | 42 | 80' |
WD819 | 1-1/4" | 2 | 230 | 1 | 42 | 80' |
WH819 | 1-1/4" | 2 | 200-208 | 1 | 42 | 80' |
BE819 | 1-1/4" | 2 | 230 | 1 | 42 | 80' |
E820 | 1-1/4" | 2 | 230 | 1 | 46 | 106' |
I820 | 1-1/4" | 2 | 200-208 | 1 | 46 | 106' |
WD820 | 1-1/4" | 2 | 230 | 1 | 46 | 108' |
WH820 | 1-1/4" | 2 | 200-208 | 1 | 46 | 106' |
PERFORMANCE COVERAGE |
CONTROL PANELS |
DIMENSIONS |
SPECIFICATIONS |
BROCHURE |
Zoeller 818, 819, 820 Series Grinder Pump Brochure |
OWNER'S MANUAL |
Zoeller 818, 819, 820 Series Grinder Pump Owner's Manual |
SPECIFICATIONS |
Zoeller 818, 819, 820 Series Grinder Pump Specifications |
TECHNICAL DATA |
Zoeller 818, 819, 820 Series Grinder Pump Technical Data |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*