Baldor VJPFPM2514T-2/4, Fire Pump Motor, 20 HP, 200/400 Volts, 26.5 Amps, 3 Phase, 60 Hz, 3450 RPM, OPSB Enclosure, 254JP Frame, Standard, 3742M Motor Type, Steel Frame
SKU #: VJPFPM2514T-2/4
Brand: Baldor
Available For Order! (Ships in 1-2 Days)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FEATURES
Fire Pump motor is for use on fire pumps installed per NFPA-20. All motors meet UL requirements in open slotted band enclosures designed for relatively clean and dry environments.
Features
- UL File E481231
- 50/60 Hertz
- 200/400V, 230/460V, 460V
- Rolled Steel and Cast Iron Frames
- Exterior Red Paint RAL3002
- Class F Insulation system
- 1.15 Service Factor, 40° C ambient continuous
Applications
- Fire Suppression
- Fire Pumps installed per NFPA-20
Note: Picture is illustrative and may not reflect the actual product
Brand | Baldor |
Mfg. Number | VJPFPM2514T-2/4 |
Product Type | Fire Pump Motor |
Horsepower | 20 HP |
Voltage | 200/400 Volts |
Phase | 3 |
Frequency | 60 Hz |
Synchronous Speed | 3600 RPM |
Speed | 3450 RPM |
Speed Code | Single Speed |
High Voltage Full Load Amps, mps | 26.5 Amps |
Enclosure | OPSB |
Frame Size | 254JP |
Motor Type | 3742M |
Motor Standards | NEMA |
Number of Poles | 2 |
Pulley Face Code | Standard |
Frame Material | Steel |
Motor Lead Quantity/Wire Size | 12 @ 12 AWG |
Overall Length | 27.66 in |
Service Factor | 1.15 |
Efficiency @ 100% Load | 90.20% |
Duty Rating | CONT |
Inverter Code | Inverter ready |
Mounting Type | Foot |
Auxillary Box | No |
Base Indicator | Rigid |
Bearing Grease Type | POLYREX EM (-20F +300F) |
Current | 53.0 A @ 200 V 26.5 A @ 400 V |
Design Code | B |
Drip Cover | Drip Cover |
Heater Indicator | No heater |
KVA Code | F |
Motor Lead Exit | KO Box |
Motor Lead Termination | Flying Leads |
Rodent Screen | No |
Shaft Diameter | 1.250 in |
Insulation Class | F |
Power Factor | 90 |
Pulley End Bearing Type | Ball Bearing |
Shaft Extension Location | Pulley End |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Starting Method | Wye Start - Delta Run |
Vibration Sensor Indicator | No Vibration Sensor |
Thermal Device - Bearing | No |
Thermal Device - Winding | No |
Ambient Temperature | 40 °C |
Agency Approvals | CSA, EEV, UL |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*