Goulds A2G63, Wide Angle Pump Switch Without Plug, Normally Open, 50 ft. Cord, Clamp Mounted, 125/250 Volts, 20 Amps Max.

FEATURES

Goulds A2G63 SJE AmpMaster Pump Switch

This mechanically-activated, wide-angle, 20 amp rated, pump switch is designed for direct control of grinder and high head sewage pumps up to 1-1/2 HP at 125 VAC or up to 3 HP at 250 VAC in grinder and lift station applications, as well as septic tank effluent pump (STEP) systems. The SJE AmpMaster pump switch is not sensitive to rotation or turbulence allowing it to be used in both calm and turbulent applications.

Applications

Normally open to pump down or empty in:

• Non-potable water
• Sewage

Features

• For direct wiring in 125 VAC or 250 VAC within specified amp ratings
• 20 Amps maximum pump run current
• 120 Amps maximum pump start current
• 9 to 24" adjustable pumping range
• Heavy-duty contacts mounted on high-conductivity copper substrates
• Second set of non-conductive contacts enhance switch activation
• Wide angle design allows the float switch to operate over a range of approximately 70º to 90º
• Cable is flexible 12 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
• Float is 3.05" diameter x 3.56" long, high impact, corrosion resistant, PVC housing for use in sewage and non-potable water up to 120°F
• Includes standard mounting clamp and boxed packaging
• UL Recognized for use in non-potable water and sewage
• CSA Certified

Note: This switch must be used with pumps that provide integral thermal overload protection.