Goulds A2N53, Narrow Angle Control Switch Without Plug, Normally Open, 30 ft. Cord, Clamp Mounted, 125/250 Volts, 5 Amps Max.

FEATURES

Goulds A2N53 SJE SignalMaster Control Switch

This mechanically-activated, narrow-angle float switch is designed to activate pump control panels and alarms. Normally Open (high level) switch turns on (closes) when the float tips slightly above horizontal signaling a high level and turns off (opens) when the float drops slightly below horizontal.

Applications

Normally open to pump down or empty in:

• Potable water
• Non-potable water
• Sewage

Features

• 5 amp, 125/250 VAC, 50/60 Hz
• Mechanically-activated, snap action contacts
• 30 feet maximum water depth (30 psi)
• Not designed for direct connection to pump
• Not sensitive to rotation
• Control differential is 1.5" above or below horizontal
• Normally open comes with yellow cap for easy identification
• Cable is flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
• Float is 2.74" diameter x 4.83", high impact, corrosion resistant, polypropylene housing for use in sewage and water up to 140°F
• Clamp mounted for applications where the switch can be attached to a discharge pipe or similar mounting device
• UL Listed for use in water and sewage
• CSA Certified

Note: This switch is not recommended for controlling electric loads less than 100 milliamps, 12 VAC and non-arcing electric load.