Goulds GT103, IRRI-GATOR Self-Priming Centrifugal Pump, 53 GPM, 1 HP, 230/460 Volts, 3 Phase, 1-1/2" NPT Suction, 1-1/2" NPT Discharge
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds GT Irrigator Self Priming Centrifugal Pump
This GT centrifugal pump, capable of repriming up to 25 feet suction lift, is engineered with a back pull out design that allows for easy service,
Features
- Self-priming design - once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe
- Back pullout design allows disassembly of pump for service without disturbing piping
- Two compartment motor for easy access to motor wiring and replaceable components
- Bolt down diffuser (guidevane) provides positive alignment with impeller. F.D.A. compliant, injection molded, glass filled Lexan for durability and abrasion resistance
- Corrosion and abrasion resistant, glass filled Noryl impeller, F.D.A. compliant
- Electro-coat paint process is applied inside and out, then baked on for corrosion resistance
- Cast iron casing, 4-bolt, back pull-out design. Openings for vacuum gauge and casing drain
- Powered for continuous operation
- Rated within the motor manufacturer’s recommended working limits
- Can be operated continuously without damage
- Mechanical seal with carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts
- Diaphragm prevents the seal from running dry
- NEMA standard open drip proof motor
- Stainless steel shaft
- Overload protection must be provided in starter unit
- Starter and heaters (3) must be ordered separately
Applications
- Lawn sprinkling
- Irrigation
- Air conditioning systems
- Heat pumps
- Water transfer
- De-watering
GT_IRRI-GATOR_Self-Priming_Centrifugal_Pumps_Technical_Brochure.pdf
GT_IRRI-GATOR_Series_Repair_Parts.pdf
GT_IRRI-GATORSelf-Priming_Centrifugal_Pumps_Sales_Sheet_Brochure.pdf
IRRI-GATOR_Self_Priming_Model_GT_Installation-Operations_Manuals.pdf
Brand | Goulds |
Mfg. Number | GT103 |
Series | GT Irri-gator |
Product Type | Centrifugal Pump |
Application | Residential water systems |
Horsepower | 1 HP |
Voltage | 230/460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 3500 rpm |
Suction Connection | 1-1/2" NPT |
Flow at 5 ft (20 psi) | 53 gpm |
Flow at 10 ft (20 psi) | 51 gpm |
Flow at 15 ft (20 psi) | 49 gpm |
Flow at 20 ft (20 psi) | 46 gpm |
Pump Casing | Cast iron |
Flow at 25 ft (20 psi) | 41 gpm |
Impeller Material | Glass filled noryl |
Discharge Connection | 1-1/2" NPT |
Maximum Flow | 60 gpm |
Maximum Head | 118 ft |
Maximum Water Temperature | 140°F |
Thermal Protection | No |
Length | 19-3/4" |
Width | 8-1/4" |
Height | 9-1/4" |
The Goulds GT Irri-Gator series of self-priming centrifugal pumps is built for dependability, efficiency, and easy maintenance. In addition to lawn sprinkling, Irri-Gator pumps can be used for irrigation, air conditioning and heating systems, water transfer and dewatering applications. Discharges for this series are 1-1/2" NPT in size.
The Goulds GT series is constructed with solid cast iron frame. In addition, an “electro-coat” paint finish is applied to both the interior and exterior of the pump housing. Electro-coating simply uses electrical current to deposit the paint finish on the item, which is then baked in a curing oven. The process reinforces the casing for corrosion and abrasion resistance.
The impeller is a FDA-compliant, glass-filled Noryl impeller which is also corrosion resistant. Since the pump could be exposed to corrosive elements such as wind, rain, dirt and groundwater, corrosion-resistance is especially important. Thus, the Goulds GT series is perhaps the most reliable irrigation pump option for years of continued good service.
Self-Priming The Goulds GT series is built with a centrifugal self-priming design. Once the initial priming is performed, the pumps will reprime once the water level rises above the level of the suction pipe. The self-priming action makes it a convenient pump for lawn sprinkler systems designed to operate at certain pre-timed intervals. The pumps are also powered for continuous use off of the self-priming action. They can reach up to 25 ft. of suction lift after repriming.
Easy ServiceabilityA back pullout design allows for the ‘back end’ of the pump to be separated from the ‘wet end,’ which remains attached to the piping. Certain back end components, such as seals and bearings can thus be easily removed from the pump. This is of great convenience if a specific part needs to be cleaned, serviced or replaced but you don’t want to detach the wet end from your piping. The motor casing is also constructed with a two compartment design for easy access to the motor wiring. You can maintain parts of the pump when they need to be maintained without disrupting the whole of your system. Customers are more likely to take proper care of the pump and perform preventive maintenance because of the convenience of the back pullout design. And preventive maintenance is the best way to ensure consistent performance over the life of the pump.
GOULDS GT IRRIGATOR SERIES CENTRIFUGAL PUMPS |
Model Comparison Chart
Model | Discharge (NPT) | HP | Voltage | Phase | GPM | Max. Head |
GT07 | 1-1/2" | 3/4 | 115/230 | 1 | 46 | 109' |
GT10 | 1-1/2" | 1 | 115/230 | 1 | 60 | 118' |
GT15 | 1-1/2" | 1-1/2 | 115/230 | 1 | 64 | 121' |
GT073 | 1-1/2" | 3/4 | 230/460 | 3 | 46 | 109' |
GT103 | 1-1/2" | 1 | 230/460 | 3 | 60 | 118' |
GT153 | 1-1/2" | 1-1/2 | 230/460 | 3 | 64 | 121' |
GT20 | 1-1/2" | 2 | 230 | 1 | 88 | 126' |
GT203 | 1-1/2" | 2 | 230/460 | 3 | 88 | 126' |
GT30 | 1-1/2" | 3 | 230 | 1 | 110 | 128' |
GT303 | 1-1/2" | 3 | 230/460 | 3 | 110 | 128' |
PERFORMANCE CURVES |
DIMENSIONS |
EXPLODED VIEW |
REPAIR PARTS |
BROCHURE |
Goulds GT Irrigator Series Centrifugal Pump Brochure |
INSTRUCTIONS |
Goulds GT Irrigator Series Centrifugal Pump Instructions |
REPAIR PARTS |
Goulds GT Irrigator Series Centrifugal Pump Repair Parts |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*