Goulds J7S, Shallow Well Jet Pump, JS+ Series, 3/4 HP, 115/230 Volts, 1 Phase, 1-1/4" NPT Suction, 1" NPT Discharge, 21.3 GPM at 5 ft (30 psi), Cast Iron Body
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds J+ Convertible Jet Pump
This pump may be used on shallow or deep well applications using appropriate Goulds fittings. It is engineered with a back pullout design for easy service without disturbing piping.
Includes:
- Pump and motor
- Pressure gauge and bushing
- Pressure switch (Part# AS4)
- Tubing and fittings
Please note that if using this pump for NEW INSTALLATIONS in deep well applications, a deepwell jet assembly package in either twin pipe or packer style must be purchased separately (see brochure in Manuals tab for choosing the approprate jet assembly). In addition, a JDW fitting package or an AV22KIT is required to make the pressure switch connection.
Features
- Two compartment motor for access to wiring and replaceable components
- Nozzle clean out plug in shallow well adapter
- Corrosion resistant, plastic tubing and fittings are easily removed for cleaning
- Premium O-ring design fittings need only be hand tight to seal
- Corrosion and abrasion resistant glass filled noryl impeller, F.D.A. compliant
- Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions
- Powered for continuous operation
- Rated within the motor manufacturer’s recommended working limits
- Can be operated continuously without damage
- Corrosion resistant electro-coat paint is baked on
- Diaphragm retains water in the casing to ensure the mechanical seal can never run dry
- Excellent air handling ability - after initial priming the pump has the ability to re-prime itself
- Built-in overload with automatic reset
- Stainless steel shaft
- Clockwise rotation when viewed from motor end
Applications
- Homes
- Farms
- Cottages
- Booster service
"
Jet_Pump_Repair_Parts.pdf
Jet_Pump_Series_Brochure.pdf
Jet_Pumps_Brochure.pdf
JS_J5S_J5SH_J7S_J10S_J15S_Shallow_Well_Jet_Pumps_Technical_Brochure.pdf
Motor_Application_and_Installation_Data_Manual.pdf
Submersible_Jet_Pumps_Service_Manual.pdf
Water_Products_Technical_Data_and_Pump_Fundamentals.pdf
The Goulds JS+ Shallow Well Pump series is deal for use in homes, cottages and for general booster service applications. Each JS+ pump has an integral shallow well jet built into the casing, eliminating the need for a separate shallow well adapter. The units here include the pump, shallow well jet adapter (Nozzle and venturi), an AS4 preset (30-50 PSI) pressure switch and a motor. Another key feature of the Goulds JS+ Shallow Well Pump is the air handling ability, meaning the pump can automatically reprime itself after the initial prime, even when air gets into the system. Pumping will simply resume as soon as the water level rises above the foot valve. In addition, the pump is powered for continuous operation within the motor limits, corrosion resistant (with baked on electro-coat paint) and easy to service, featuring a nozzle clean-out plug and back pull-out design. The two component motor compartment allows for easy access to the wiring and replaceable components. The protected mechanical seal is a of a special diaphragm design that retains water in the casing at all times to ensure that the mechanical seal will never be run dry. The impeller is FDA compliant, corrosion and abrasion resistant glass filled Noryl, while the tubings and fittings are FDA compliant engineered plastic that is corrosion and UV resistant. The bolt down diffuser provides positive alignment with the impeller and includes a stainless steel wear ring, as well as FDA compliant, injection molded, glass filled Lexan for extended performance in abrasive conditions.
GOULDS JS+ SHALLOW WELL JET PUMP |
Model Comparison Chart
Model | Suction | Discharge | HP | Voltage | Phase | GPM |
J5SH | 1-1/4" NPT | 1" NPT | 1/2 | 115/230 | 1 | 11.3 GPM @ 5' (30 PSI) |
J5S | 1-1/4" NPT | 1" NPT | 1/2 | 115/230 | 1 | 16.5 GPM @ 5' (30 PSI) |
J10S | 1-1/4" NPT | 1" NPT | 1 | 115/230 | 1 | 24.8 GPM @ 5' (30 PSI) |
J15S | 1-1/4" NPT | 1" NPT | 1-1/2 | 115/230 | 1 | 26.6 GPM @ 5' (30 PSI) |
PERFORMANCE RATINGS |
COMPONENTS |
INSTALLATION |
BOOSTER SYSTEMS |
DIMENSIONS AND WEIGHTS |
REPAIR PARTS |
BROCHURE |
Goulds JS+ Jet Pump Brochure |
INSTALLATION MANUAL |
Goulds JS+ Jet Pump Installation Manual |
REPAIR PARTS |
Goulds JS+ Jet Pump Repair Parts |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*