Goulds PE41P1, Submersible Effluent Pump, Model PE41, 4/10 HP, 115 Volts, 1 Phase, 1-1/2" NPT Discharge, 61 GPM Maximum, Automatic, With Piggyback Float Switch, 20 ft. Cord
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds PE Submersible Effluent Pump
Heavy duty, portable and compact effluent pump capable of handling up to 1/2" solids.
Features and Benefits
- Corrosion resistant construction
- Cast iron body
- Thermoplastic impeller and cover
- Upper sleeve and lower heavy duty ball bearing construction
- Motor is permanently lubricated for extended service life
- Powered for continuous operation
- All ratings are within the working limits of the motor
- Quick disconnect power cord, 20′ standard length, heavy duty 16/3 SJTW with NEMA 5-15P, three prong, 115 volt grounding plug
- Complete unit is heavy duty, portable and compact
- Mechanical seal is carbon, ceramic, BUNA and stainless steel
- Stainless steel fasteners
- Built-in thermal overload protection with automatic reset
- Class B insulation
- Oil-filled design motor
- High strength carbon steel shaft
Applications
Specially designed for the following on-site wastewater treatment uses:
- Mound systems
- Effluent/Dosing systems
- Low pressure pipe systems
- Basement draining
- Heavy duty sump/dewatering
Brand | Goulds |
Mfg. Number | PE41P1 |
Model Number | PE41 |
Series | PE |
Product Type | Submersible effluent pump |
Application | Wastewater treatment |
Horsepower | 4/10 HP |
Voltage | 115 Volts |
Phase | 1 |
Frequency | 60 Hz |
Speed | 3400 rpm |
Operation | Automatic |
Float Switch Style | Piggyback Float Switch |
Pump Body | Cast iron |
Impeller Material | Thermoplastic |
Discharge Size | 1-1/2" NPT |
Maximum Flow | 61 gpm |
Maximum Head | 29 ft |
Flow at 5 ft | N/A |
Flow at 10 ft | 57 gpm |
Flow at 15 ft | 46 gpm |
Flow at 20 ft | 33 gpm |
Flow at 25 ft | 16 gpm |
Maximum Solids Handling | 1/2" |
Minimum Basin Diameter | 18" |
Motor Design | PSC (Permanent Split Capacitor) |
Motor Insulation | Class B |
Thermal Protection | Yes |
Current | 7.5 Amps |
Minimum Circuit Breaker | 15 |
Maximum Temperature | 104°F |
Cord Length | 20 ft |
The Goulds PE series effluent pumps are heavy duty graywater pumps which are able to pass water with up to 1/2" solids. These pumps are specifically designed for use in on-site wastewater treatment application settings, such as mound systems, dosing systems, low pressure pipe systems, basement draining and heavy duty dewatering applications. Each pump is comprised of a variety of construction materials to ensure corrosion resistance and long lasting performance. The volute is cast iron, the impeller is thermoplastic and the mechanical seal is a mix of carbon, ceramic, BUNA and stainless steel. The fasteners are stainless steel and the shaft is carbon steel as well. The motor is oil filled and permanently lubricated with built in thermal overload protection with an automatic reset. These Goulds PE pumps are rated for continuous operation and include an integral carry handle for added convenience on job sites. All pumps listed below include a 20 ft. power cord. Automatic models include a piggyback float switch.
Goulds PE Series Effluent Pumps |
Goulds PE Series Pump Model Comparison Chart
Model | Discharge | HP | Voltage | Phase | GPM | Max. Head | Type |
PE31M | 1.5" NPT | 1/3 | 115 | 1 | 53 | 25' | Manual |
PE41M | 1.5" NPT | 4/10 | 115 | 1 | 61 | 29' | Manual |
PE31P1 | 1.5" NPT | 1/3 | 115 | 1 | 53 | 25' | Auto |
PE42M | 1.5" NPT | 4/10 | 230 | 1 | 61 | 29' | Manual |
PE41P1 | 1.5" NPT | 4/10 | 115 | 1 | 61 | 29' | Auto |
PE51M | 1.5" NPT | 1/2 | 115 | 1 | 70 | 37' | Manual |
PE52M | 1.5" NPT | 1/2 | 230 | 1 | 70 | 37' | Manual |
PE42P1 | 1.5" NPT | 4/10 | 230 | 1 | 61 | 29' | Auto |
PE51P1 | 1.5" NPT | 1/2 | 115 | 1 | 70 | 37' | Auto |
PE52P1 | 1.5" NPT | 1/2 | 230 | 1 | 70 | 37' | Auto |
Performance Curve |
Dimensions |
TECHNICAL BROCHURES |
Goulds PE Series Brochure |
MANUALS |
Goulds PE Series Instruction Manual |
PARTS LISTS |
Goulds PE Series Repair Parts List |
SPECIFICATIONS |
N/A |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*