Goulds RGS2012, RGS Series, Grinder Pump, 2 HP, 208/230 Volts, 1 Phase, 1-1/4" NPT, 41 GPM Max, 95 ft Max Head, 20 ft Cord
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Goulds RGS2012 Residential Grinder Pump
The pump is capable of grinding domestic and raw sewage containing small quanitities of plastic, rubber, cloth, paper and other non-abrasive solids. It is designed for high head sewage applications where a gravity system is not practical. Ideal for pressure sewage systems.
Features
- Capable of grinding domestic sewage in individual residential applications
- Anti-roping design cutter system with two blade rotary cutter threaded to shaft. Stationary cutter ring is reversible for extended service
- Silicon bronze semi-open impeller with non-overloading two vane design and pump-out vanes for mechanical seal protection
- Cast iron volute type casing for high efficiency
- High grade turbine oil surrounds motor for more efficient heat dissipation, permanent lubrication of bearings and mechanical seal, and protection against outside environment
- 300 series stainless steel motor shaft, short overhang for minimum shaft deflection
- Designed for continuous operation
- Upper and lower ball bearings for precision positioning of parts and to carry all radial and thrust loads
- Mechanical seal with hardfaced silicon carbide for longer life, stainless steel metal parts, BUNA-N elastomers
- Power cable is severe duty rated, oil and water resistant
- Epoxy seal on motor end provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking
- O-ring assures positive sealing against contaminants and oil leakage
- Electro-coat paint process protects all casting surfaces
- Capacitor start with on winding thermal protector. No external capacitor kit required
Instructions For Changing A Grinder Pump Cutter-Cutter Ring Installation-Operation Manuals.pdf
RGS Submersible Grinder Pumps Specifications.pdf
RGS2012 Submersible Grinder Pump Technical Brochure.pdf
Submersible Grinder Pumps Specifications.pdf
Single_Phase_Single_Seal_Grinder_Pump_Installation-Operation_Manual.pdf
Sump_Effluent_and_Sewage_Pump_Repair_Parts.pdf
Brand | Goulds |
Mfg. Number | RGS2012 |
Product Type | Grinder pump |
Series | RGS |
Application | Pressure sewage |
Horsepower | 2 HP |
Voltage | 208/230 Volts |
Phase | 1 |
Pump Casing | Cast iron |
Frequency | 60 Hz |
Speed | 3450 RPM |
Discharge Connection | 1-1/4" NPT |
Impeller Design | Semi-open, non-clog |
Impeller Material | Cast silicon bronze |
Motor Design | NEMA 48 frame |
Maximum Total Head | 94 ft |
Motor Insulation | Class F |
Maximum Flow | 42 GPM |
Maximum Temperature (Intermittent) | 140°F |
Power Cord Length | 20 ft |
Maximum Current | 15.0 Amps |
Overload Protection | Yes |
Maximum Submergence | 50 ft |
Maximum Working Pressure | 50 PSI |
Maximum Temperature (Continuous) | 104°F |
Goulds RGS2012 series submersible grinder pumps are specifically designed for high head sewage applications where installing a gravity system is not practical. They are ideal for grinding in pressure sewage applications. The cutting system is a unique anti-roping design with a two blade rotary cutter threaded to the shaft. The stationary cutter ring is reversible allowing you to extend the service life. Both the rotater and ring are made with 440 C hardened stainless steel to handle the toughest waste solids.
The pump casing itself is rugged cast iron and can be adapted to fit with the proper guide rail system. The motor shaft is 300 series stainless steel. The pump and motor are designed for continuous operation when fully submerged. The main difference among the models listed here is the type of power cord included with each; some have bare leads for use in connection with a control panel or junction box while other have three prong grounding plugs. All models are single phase.
Goulds RGS2012 Series Grinder Pumps |
Model Comparison Chart
Model Number | Discharge | HP | Voltage | GPM | Max. Head | Cord | Operation |
RGS2012P | 1-¼” NPT | 2 | 208/230 | 41 | 95 | 20 ft. w/Bare Leads | Manual |
RGS2012 | 1-¼” NPT | 2 | 208/230 | 41 | 95 | 20 ft. w/230V Plug | Manual |
RGS2012PA | 1-¼” NPT | 2 | 208/230 | 41 | 95 | 20 ft. w/230V Plug and Piggyback Float | Automatic |
RGS2012PS | 1-¼” NPT | 2 | 208/230 | 41 | 95 | 30 ft. w/230V Plug | Manual |
RGS2012E1S | 1-¼” NPT | 2 | 208/230 | 42 | 94 | 6 ft. | Manual |
Performance Curve |
TECHNICAL BROCHURES |
Goulds RGS2012 Brochure |
INSTALLATION/OPERATION MANUALS |
Goulds RGS2012 Instruction Manual |
Cutter Replacement Instructions |
PARTS LISTS |
Goulds RGS2012 Repair Parts List |
SPECIFICATIONS |
Goulds RGS2012 Specifications Sheet |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*