Grundfos 97534558, CR 32 H Series, Model CR 32-6-2 H, Horizontal End-Suction Multistage Centrifugal Pump End Only, 25 HP Required, 6 Stages, 3521 RPM, 1-1/2" NPT Suction, 1" NPT Discharge, 212.78 GPM Max., 462.21 ft Max. Head, Cast Iron, HQQE Shaft Seal,
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Grundfos CR 32 H Horizontal End Suction Multistage Centrifugal Pump End Only
The Grundfos CR-H pumps are horizontal end suction pumps typically mounted on base plates. The end suction design enables the pump to be installed horizontally in traditional, end suction design piping where the pump has an axial suction port and a radial centerline discharge port. This design allows “back pull-out” capability. This means the pump usually can be easily serviced without removing the volute from the pipe system. The benefit of the CR-H pump is a significant reduction in energy costs, maintenance effort, and downtime along with increased pump life.
Please note that this is a pump end only. The motor is not included.
Features:
- Reliability
- High efficiency
- Service-friendly
- Suitable for slightly aggressive liquids
- High corrosion resistance
- Single-pump solution making high pressures possible
Applications:
- Industrial / Chemical Processing systems
- Washing and cleaning systems
- Pumping of acids and alkalis
- Filtration systems
- Water Pressure Boosting
- Water Treatment
- HVAC
- Irrigation
Note: Picture is illustrative and may not reflect the actual product.
Brand | Grundfos |
Mfg. Number | 97534558 |
Model | CR 32-6-2 H |
Series | CR 32 H |
Connection | GA |
Product Type | Horizontal?End-Suction?Multistage Centrifugal?Pump End Only |
Application | Water treatment, irrigation |
Horsepower Required | 25 HP |
Stages | 6 |
Bearing Material | SIC |
NEMA Size | 284TC |
RPM | 3521 RPM |
Shaft Seal Type | HQQE |
Construction Material | Cast Iron |
Impeller Material | 304 Stainless Steel |
Motor Standard | NEMA |
Max. Water Temperature | 250°F |
Suction | 1-1/2" NPT |
Discharge | 1" NPT |
Maximum Total Head | 462.21 ft |
Maximum Flow | 212.78 GPM |
Weight | 171 lb |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*