Baldor EIM3540A-P, Irrigation Tower Drive Motor, 1 HP, 380/ 460 Volts, 1.5 Amps, 3 Phase, 1740/ 1430 RPM, 50/60 Hz, TENV Enclosure, 56YZ Frame, No Endplate, 3524M Motor Type, Steel Frame
SKU #: EIM3540A-P
Brand: Baldor
Available For Order! (Ships in 1-2 Days)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FEATURES
Baldor Irrigation Tower Drive Motor
Irrigation tower drive motors. Three phase, totally enclosed non ventilated (TENV).
Features
- Sealed fit at endplates
- Sheds water
- Conduit box is cast into the opposite drive endplate
- High overload capabilities
- The ""P"" suffix indicates the motor comes less pulley endplate for integral mounting
- Capable of field modification for older designs with internal thru bolts
- Operable at 50/60 Hz.
- Tan epoxy paint for tough environments
- High temperature moisture resistant grease
- 1.0 service factor
- Class F insulation
Applications
- Irrigation tower drives
Note: Picture is illustrative and may not reflect the actual product
Brand | Baldor |
Mfg. Number | EIM3540A-P |
Product Type | Irrigation Tower Drive Motor |
Horsepower | 1 HP |
Voltage | 380 V @ 50 Hz 460 V @ 60 Hz |
Phase | 3 |
Frequency | 50/60 Hz |
Synchronous Speed | 1,500 rpm |
Speed | 1740/ 1430 RPM |
Speed Code | Single Speed |
High Voltage Full Load Amps | 1.5 Amps |
Enclosure | TENV |
Frame Size | 56YZ |
Motor Type | 3524M |
Motor Standards | NEMA |
Number of Poles | 4 |
Pulley Face Code | No Endplate |
Frame Material | Steel |
Motor Lead Quantity/Wire Size | 3 @ 18 AWG |
Overall Length | 11.02 in |
Service Factor | 1 |
Efficiency @ 100% Load | 85.50% |
Duty Rating | CONT |
Inverter Code | Inverter ready |
Auxillary Box | No Auxillary Box |
Base Indicator | No Mounting |
Bearing Grease Type | POLYREX EM (-20F +300F) |
Current | 1.7 A @ 380 V 1.5 A @ 460 V |
Design Code | B |
Drip Cover | No Drip Cover |
Heater Indicator | No heater |
KVA Code | M |
Motor Lead Exit | Lead Hole |
Motor Lead Termination | Flying Leads |
Rodent Screen | No |
Insulation Class | F |
Power Factor | 76 |
Pulley End Bearing Type | No Bearing |
Shaft Extension Location | Pulley End |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Starting Method | Direct on line |
Vibration Sensor Indicator | No Vibration Sensor |
Thermal Device - Bearing | No |
Thermal Device - Winding | No |
Ambient Temperature | 40 °C |
Agency Approvals | CSA CSA EEV UR |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*