Myers QD75S, Shallow Well Jet Pump, QD Series, 3/4 HP, 115/230 Volts, 1 Phase, 1" NPT Discharge, 1-1/4" NPT Suction, 20 GPM Max, 150 ft. Max Head, 65 PSI Shut-Off Pressure, Cast Iron Body
SKU #: QD75S
Brand: Myers
Available For Order! ((Usually Ships 3-5 Days))This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
LIST PRICE 1,108.00
Disclaimer: "See final price in cart"
Call Sales Counter !
Calculate Shipping
Ship Weight (49.00 lbs)
FEATURES
Myers QD Series Shallow Well Jet Pump
This shallow well jet pump primes quickly, delivers strong performance, and features a moisture and insect proof motor for optimum reliable service. This pump features a large capacity top suction case and internal priming plate for quick and reliable priming. The motor provides dependable long life to all critical bearings with electrical connections enclosed and protected from potential moisture and insect problems.
Features
-
Improved shallow well design
-
Cast iron construction
-
Corrosion resistant engineered reinforced thermoplastic impeller
-
Thermoset diffuser with stainless steel wear ring
-
Maximum pressures to 65 PSI
-
Quick and easy priming
-
Large capacity, top suction case
-
Internal priming plate
-
Separate priming plug on case
-
Long life motor
-
115/230 volt with dual voltage selector switch
-
Prevents moisture, insect or dirt damage to critical electrical components
-
Provides clean, dry environment to electrical components for maximum motor life
-
Permanently lubricated double-ball bearings
-
Strong capacitor starting torque
-
Non-overloading, continuous duty rating
-
Internal thermal overload protection
-
1-1/4” suction, 1” discharge on all models
-
Convenient back pullout design
-
Nozzle clean-out and priming fitting
-
Precision lapped and polished carbon/ceramic faces, buna elastomers, and stainless steel components
-
Pre-set at 30/50 psi setting
Applications
-
Water systems:
-
Home
-
Farm
-
Commercial
-
Industrial
-
Brand | Myers |
Mfg. Number | QD75S |
Series | QD Series |
Product Type | Shallow well jet pump |
Application | Water systems |
Horsepower | 3/4 HP |
Voltage | 115/230 volts |
Phase | 1 |
Frequency | 60 Hz |
Suction Connection | 1-1/4" NPT |
Discharge Connection | 1" NPT |
Maximum Capacity | 20 GPM |
Maximum TDH | 150 ft. |
Shut-Off Pressure | 65 PSI |
Pressure Switch Setting | 30/50 PSI |
Impeller Material | Engineered Reinforced Thermoplastic |
Pump Casing Material | Cast iron |
Shaft Seal | Carbon-ceramic/stainless steel/buna |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*