Sta-Rite DSS4HG3T, Multi-Stage Centrifugal Pump, DSS Series, 2 HP, 230/460 Volts, 3 Phase, 4 Stages, 1-1/4" NPT Discharge, 1-1/2" NPT Suction, Noryl Impeller, 55 GPM Max., 223 ft. Max. Head, Cast Iron Body
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Call Toll Free: 800-429-0800
FEATURES
Sta-Rite PRO-Storm DSS Series Multi-Stage Sprinkler Pump
This pump delivers high-performance without priming problems and delays. This series is designed for minimal electrical consumption and quiet operation from the professional-grade motor. The new series offers first-in-class priming capabilities of up to 15 foot lifts!
Features
- Close-grained cast iron motor bracket and integral pump base with 1-1/2" NPT inlet connection, stable heavy-duty design for rigid pipe and solid base mountings
- Close-grained cast iron, 1-1/4" NPT discharge connection, with easy-access drain port for end of season draining and winterization
- Noryl precision-molded impellers and diffusers have extra-smooth ports to maximize efficiency and performance
- Polished 304 stainless steel outer shell
- 303 stainless steel shaft
- Special brass priming valve for trouble-free operation during the initial pump priming
- High-pressure seal, carbon-ceramic seal faces, Buna-N elastomers
- 2 HP, three-phase, 3450 RPM, 230/460 volt, high-service factor, capacitor-start/capacitor-run, total enclosed fan cooled motor, rated for continuous-duty operation
- Maximum inlet pressure of 20 PSI
- Maximum discharge pressure of 130 PSI
- Maximum operating temperature of 120°F (49°C)
- Maximum suction lift of 15 feet
- Four stages
Applications
- Residential and commercial turf irrigation
- Residential water systems
- Shower and washing systems
- Water transfer
- Heating and air conditioning systems
- Water features and fountains
| Brand | Sta-Rite |
| Mfg. Number | DSS4HG3T |
| Series | DSS3/DSS4 Series |
| Product Type | Centrifugal pump |
| Application | Irrigation & water systems |
| Horsepower | 2 HP |
| Voltage | 230/460 volts |
| Phase | 3 |
| Frequency | 60 Hz |
| Speed | 3450 RPM |
| Design | Multi-stage |
| Suction Connection | 1-1/2" NPT |
| Discharge Connection | 1-1/4" NPT |
| Maximum Capacity | 55 GPM |
| Maximum TDH | 223 ft. |
| Stages | 4 |
| Impeller Material | Noryl |
| Pump Casing Material | Cast iron |
| Motor Shaft Material | Stainless steel |
| Shaft Seal | Carbon-ceramic/Buna-N |
| Enclosure | TEFC |
| Max. Working Pressure | 130 PSI |
| Max. Suction Pressure | 20 PSI |
| Max. Temperature | 120°F |
The Sta-Rite PRO-Storm DSS series lawn/irrigation centrifugal pumps are designed for use in residential and commercial turf irrigation, residential water systems, shower and washing systems, water transfer, HVAC systems, water features and fountain applications. This pump delivers high-performance without priming problems and delays. This series is designed for minimal electrical consumption and quiet operation from the professional-grade motor. The PRO-Storm DSS series offers first-in-class priming capabilities of up to 15 foot lifts. Features:
-
Close-grained cast iron motor bracket and integral pump base with 1-1/2" NPT inlet connection, stable heavy-duty design for rigid pipe and solid base mountings
-
Close-grained cast iron, 1-1/4" NPT discharge connection, with easy-access drain port for end of season draining and winterization
-
Noryl precision-molded impellers and diffusers have extra-smooth ports to maximize efficiency and performance
-
Polished 304 stainless steel outer shell
-
303 stainless steel shaft
-
Special brass priming valve for trouble-free operation during the initial pump priming
-
High-pressure seal, carbon-ceramic seal faces, Buna-N elastomers
-
2 HP, single-phase, 3450 RPM, 230-volt, high-service factor, capacitor-start/capacitor-run, open dripproof motor, rated for continuous-duty operation
-
Maximum inlet pressure of 20 PSI
-
Maximum discharge pressure of 130 PSI
-
Maximum operating temperature of 120°F (49°C)
- Multiple stages
| STA-RITE DSS SERIES LAWN AND IRRIGATION PUMPS |
Model Comparison Chart
| Model | Suction | Discharge | HP | Voltage | Phase | Max. GPM | Max. Head | Stages |
| DSS3HG | 1-1/2" NPT | 1-1/4" NPT | 2 | 230 | 1 | 55 | 170' | 3 |
| DSS4HG-01 | 1-1/2" NPT | 1-1/4" NPT | 2 | 230 | 1 | 55 | 223' | 4 |
| DSS3HG3T | 1-1/2" NPT | 1-1/4" NPT | 2 | 230/460 | 3 | 55 | 170' | 3 |
| DSS4HG3T | 1-1/2" NPT | 1-1/4" NPT | 2 | 230/460 | 3 | 55 | 223' | 4 |
| PUMP PERFORMANCE |
| RECOMMENDED INSTALLATIONS |
| DIMENSIONAL DATA |
| REPAIR PARTS |
| MANUAL |
| Sta-Rite DSS Series Owner's Manual |
| SPECIFICATIONS |
| Sta-Rite DSS Series Specifications |
| INSTRUCTIONS |
| Sta-Rite DSS4HG Rebuild Kit Instructions |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*
