Baldor UCC10150, Universal Crop Dryer Motor, 10 HP - 15 HP , 230 Volts, 41.0 Amps, 1 Phase, 3450 RPM, 60 Hz, OPEN Enclosure, 215Z Frame, Standard, 3740C Motor Type, Steel Frame
SKU #: UCC10150
Brand: Baldor
Available For Order! (Ships in 1-2 Days)This product is direct shipped from the manufacturer. The estimated shipping time may vary depending on the manufacturers stock, backlog or delay. If you would like to confirm the manufacturers lead time for this item, call our Pump Products sales team at 800-429-0800 between the hours of 7:30 A.M. - 4:30 P.M. E.S.T.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Baldor Universal Crop Dryer Motor
Single phase permanent split capacitor (switchless) design available in Open Air over(OPAO) and Totally enclosed air over (TEAO) designs.
Features
- High full load efficiency for reduced operating cost
- No mechanical switch to wear
- No noise and vibration from regeneration
- Less sensitive to voltage variations
- Soft start
- Thermostats come standard
- Tan epoxy paint for tough environments
- High temperature moisture resistant grease
- 1.0 service factor
- Class F insulation
Applications
- Specifically engineered for use on vane axial crop dryers
Note: Picture is illustrative and may not reflect the actual product
Brand | Baldor |
Mfg. Number | UCC10150 |
Product Type | Universal Crop Dryer Motor |
Horsepower | 10 HP - 15 HP |
Voltage | 230 Volts |
Phase | 1 |
Frequency | 60 Hz |
Synchronous Speed | 3600 RPM |
Speed | 3450 RPM |
Speed Code | Single Speed |
High Voltage Full Load Amps | 41.0 Amps |
Enclosure | OPEN |
Frame Size | 215Z |
Motor Type | 3740C |
Motor Standards | NEMA |
Number of Poles | 2 |
Pulley Face Code | Standard |
Frame Material | Steel |
Motor Lead Quantity/Wire Size | 2 @ 8 AWG, A PH |
Overall Length | 18.57 in |
Service Factor | 1 |
Efficiency @ 100% Load | 83.00% |
Duty Rating | CONT |
Inverter Code | Not inverter |
Auxillary Box | No Auxillary Box |
Base Indicator | Rigid |
Bearing Grease Type | POLYREX EM (-20F +300F) |
Current | 41.0 A |
Drip Cover | No Drip Cover |
Heater Indicator | No heater |
KVA Code | C |
Motor Lead Exit | Pipe or Pipe Adaptor |
Motor Lead Termination | Flying Leads |
Rodent Screen | No |
Shaft Diameter | 1.125 in |
Insulation Class | F |
Power Factor | 98 |
Pulley End Bearing Type | Sealed |
Shaft Extension Location | Pulley End |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Starting Method | Direct on line |
Vibration Sensor Indicator | No Vibration Sensor |
Thermal Device - Bearing | No |
Thermal Device - Winding | No |
Ambient Temperature | 40 ?C |
Agency Approvals | CSA UR |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
"Ask Inspector PumpHead"
*Note: Picture is illustrative and may not reflect the actual product.*