Baldor VHECP3663T, Vertical P-Base Pump Motor, 5 HP, 230/460 Volts, 5.7 Amps, 3 Phase, 3490 RPM, 60 Hz, TEFC Enclosure, 184HP Frame, P-Base, 0632M Motor Type, Cast Iron Frame
FEATURES
Baldor Vertical P-Base Pump Motor
Baldor Reliance Vertical P-Base motors are designed and manufactured for normal, medium and high thrust in-line pump applications. Motor design includes severe duty construction with corrosion-resistant epoxy finish, cast-iron construction, designed for vertical mounting. Rotatable conduit box, stainless steel nameplates, shaft seals. Energy efficient windings. Two lifting lugs for balanced lifting. All Baldor-Reliance Vertical P-Base motors have 1.15 Service Factor and are Inverter-Ready. Normal thrust VHECP motors meet or exceed NEMA Premium efficiency levels. Baldor Reliance NEMA LP and VP motors are designed to meet the American Petroleum Institute Standard 610.
Features
- Aggregate Industry
- Cement Industry
- Chemical Industry
- Forest Industry
- Petroleum Industry
- Pulp & Paper Industry
Application
- Processing
- Fluid Handling
- Water Treatment
- Waste Water
- Agricultural Irrigation
Note: Picture is illustrative and may not reflect the actual product
Brand | Baldor |
Mfg. Number | VHECP3663T |
Product Type | Vertical P-Base Pump Motor |
Horsepower | 5 HP |
Voltage | 230/460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Synchronous Speed | 3600 RPM |
Speed | 3490 RPM |
Speed Code | Single Speed |
High Voltage Full Load Amps | 5.7 Amps |
Enclosure | TEFC |
Frame Size | 184HP |
Motor Type | 0632M |
Motor Standards | NEMA |
Number of Poles | 2 |
Pulley Face Code | P-Base |
Frame Material | Cast Iron |
Motor Lead Quantity/Wire Size | 9 @ 16 AWG |
Overall Length | 22.18 in |
Service Factor | 1.15 |
Efficiency @ 100% Load | 90.20% |
Duty Rating | CONT |
Inverter Code | Inverter ready |
Auxillary Box | No |
Base Indicator | No Mounting |
Bearing Grease Type | POLYREX EM (-20F +300F) |
Current | 12.5 A @ 208 V 11.4 A @ 230 V 5.7 A @ 460 V |
Design Code | A |
Drip Cover | Drip Cover |
Heater Indicator | No heater |
KVA Code | M |
Motor Lead Exit | KO Box |
Motor Lead Termination | Flying Leads |
Rodent Screen | No |
Shaft Diameter | 1.125 in |
Insulation Class | F |
Power Factor | 90 |
Pulley End Bearing Type | Ball Bearing |
Shaft Extension Location | Pulley End |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Starting Method | Direct on line |
Vibration Sensor Indicator | No Vibration Sensor |
Thermal Device - Bearing | No |
Thermal Device - Winding | No |
Ambient Temperature | 40 °C |
Agency Approvals | CSA, CSA, EEV, UR |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*