Zoeller 161-0011, Model F161, Series 160, Flow-Mate High Head Sump & Effluent Pump, 1/2 HP, 230 Volts, 3 Phase, 1-1/2 Inch NPT Discharge, Single Seal, 20 ft Cord, Manual

SKU #: 161-0011
Brand: Zoeller
In Stock! (Ships Today !) This item is In Stock at our warehouse distribution center. Stock orders placed Monday through Friday by 1:00 pm EST. will be shipped the same day. Orders placed Friday after 1:00 pm through Sunday will be shipped on Monday.
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
$1,311.88
Call Sales Counter !
Order By Phone
Calculate Shipping Ship Weight (82.00 lbs)

FEATURES

Zoeller "Flow-Mate" High Head Effluent Pump

This submersible pumpis designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. This non-automatic unit is ideal for use in septic systems, low pressure pipe (LPP), and enhanced flow STEP systems.  As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance!

Features

  • Corrosion-resistant, powder coated epoxy finish
  • Durable, cast iron constructed switch case, base, motor and pump housing
  • Cast iron Class 25-30 (25,000X tensile strength)
  • Impeller - bronze class 85-5-5-5
  • Upper and lower ball bearing running in bath of oil
  • Carbon and ceramic shaft seal
  • SAE 1117 carbon steel motor shaft 
  • No screens to clog
  • Neoprene square ring & gasket
  • Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  • Stainless steel handle for easy installation and removal
  • Hermetically sealed to be watertight, dust-tight and completely submersible
  • Passes 3/4" spherical solids
  • 1-1/2" NPT discharge 
  • Maximum temperature for effluent or dewatering: 130° F 
  • 100% of units are computerized tested

Control Panel Options

Below are the control panels that can be used with this pump:

Note: Image is illustrative and may not reflect details of actual product. 

Please see the manuals for specifications on this item

The Zoeller 160 series high head "Flow-Mate" effluent/sump pumps are designed for high head effluent, groundwater and general dewatering applications. They can pump effluent or groundwater. The Zoeller 160 series pumps are typically used in a septic tank, low pressure pipe (LPP) and an enhanced flow step system settings.

These pumps are rugged cast iron, with an epoxy powder coated finish for extra corrosion protection. The impeller is non-clogging bronze vortex. The upper and lower sleeve bearings run in a bath of oil, the shaft seal is made of carbon and ceramic, the bolts, screws, handle, guard, arm and seals are all stainless steel. There are no sheet metal parts to rust or corrode in the pump. The motor is 60 Hz, 3450 RPM, oil-filled and hermetically-sealed with automatic reset thermal overload protection (in single phase models).

Each pump can operate at water temperatures up to 130°F for effluent applications.  This pump can pass up to ¾” spherical solids. Automatic models include a 2-pole mechanical float switch. All models include a standard 20 ft. UL listed 3-wire power cord with options for 25, 35 and 50 ft. The standard discharge size is 1-1/2" NPT with 2" and 3" flanges available.

Pumps with the "161-163-165" prefix are single seal while pumps with the "4161-4163-4165" prefix are double seal with improved bearing lubrication.

Please note that automatic models are not recommended for use in effluent systems.

Zoeller 160 Series Effluent Pump

Model Comparison Chart

Model Discharge HP Volt. Phase GPM Head Amps Type
161-0001 M161 1.5" NPT 1/2 115 1 100 56' 15.5 Auto
161-0002 N161 1.5" NPT 1/2 115 1 100 56' 15 Non
161-0003 D161 1.5" NPT 1/2 230 1 100 56' 7.5 Auto
161-0004 E161 1.5" NPT 1/2 230 1 100 56' 7.5 Non
161-0011 F161 1.5" NPT 1/2 230 3 100 56' 5.2 Non
161-0012 J161 1.5" NPT 1/2 200-208 3 100 56' 6.4 Non
161-0026 BN161 1.5" NPT 1/2 115 1 100 56' 15.5 Auto
161-0027 BE161 1.5" NPT 1/2 230 1 100 56' 7.5 Auto
161-0078 H161 1.5" NPT 1/2 200-208 1 100 56' 8.8 Auto
161-0085 N161 1.5" NPT 1/2 115 1 100 56' 15.5 Non
4161-0002 N4161 1.5" NPT 1/2 115 1 100 56' 15.5 Non
4161-0004 E4161 1.5" NPT 1/2 230 1 100 56' 7.5 Non
163-0001 M163 1.5" NPT 1/2 115 1 61 66' 15.0 Auto
163-0002 N163 1.5" NPT 1/2 115 1 61 66' 15.0 Non
163-0003 D163 1.5" NPT 1/2 230 1 61 66' 7.5 Auto
163-0004 E163 1.5" NPT 1/2 230 1 61 66' 7.5 Non
163-0008 J163 1.5" NPT 1/2 200-208 3 61 66' 6.0 Non
163-0009 F163 1.5" NPT 1/2 230 3 61 66' 4.8 Non
163-0033 BE163 1.5" NPT 1/2 230 1 61 66' 7.5 Non
163-0034 BN163 1.5" NPT 1/2 115 1 61 66' 15.0 Auto
163-0078 J163 1.5" NPT 1/2 200-208 3 61 66' 6.0 Non
4163-0002 N4163 1.5" NPT 1/2 115 1 61 66' 15.0 Non
4163-0004 E4163 1.5" NPT 1/2 230 1 61 66' 7.5 Non
165-0003 D165 1.5" NPT 1 230 1 61 86' 10.2 Auto
165-0004 E165 1.5" NPT 1 230 1 61 86' 10.2 Non
165-0008 G165 1.5" NPT 1 460 3 61 86' 10.2 Non
165-0009 J165 1.5" NPT 1 200-208 3 61 86' 7.5 Non
165-0030 BE165 1.5" NPT 1 230 1 61 86' 10.2 Auto
4165-0004 E4165 1.5" NPT 1 230 1 61 86' 10.2 Auto
Performance Curve

Dimensions

BROCHURES
Zoeller 160 Series Brochure
 
 
INSTRUCTIONS
Zoeller 160 Series Installation Instructions
 
 
SPECIFICATIONS
Zoeller 160 Series Specifications Sheet
 
 
REPAIR PARTS
Zoeller 160 Series Repair Parts List
 
 

Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.

Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order

Inspector Pumphead & Our Customer Service Representatives Are Available

Mon-Fri 7:30 am to 5:00 pm EST

Call Toll Free: 800-429-0800

"Ask Inspector PumpHead"

*Note: Picture is illustrative and may not reflect the actual product.*