Zoeller 161-0105, Model GX161, X160 Series, Explosion Proof High Head Effluent Pump, 1/2 HP, 460 Volts, 3 Phase, 1-1/2" NPT Vertical Flange, 100 GPM Max, 56 ft Max Head, 25 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller GX161 High Head Explosion Effluent Proof Pump
This submersible pump is designed for use in residential or commercial dewatering and effluent applications in Class I, Division 1, Group C and D environments. Each pump is FM/CSA approved and features innovative motor and electrical enclosures that are designed to reduce the risk of vapor ignition both inside and outside the pump. Should vapors inside the electrical enclosures become ignited, the enclosures are engineered to contain the event and prevent escalation. Each pump is constructed of hardware that will allow it to operate safely and efficiently in extreme conditions.
This pump is NOT for use in acidic, methanol, or ethyl acetate atmospheres.
Features
- FM listed motor for Class I, Division 1, Group C & D environments
- Non-clogging vortex impeller design, bronze class 88-8-0-4
- Stainless steel rotor shaft
- Durable, cast construction: cast iron cover, motor adapter and pump housing
- 25 ft UL listed, 8-wire neoprene cord. Sensor leads and power leads in one cord for easy installation
- Stainless steel plate, bolts, handle, guard and float rod, guide, switch arm and actuator assembly
- Threaded conduit connection for protecting cords in extra heavy-duty applications
- Moisture sensors pre-wired in motor housing (functionality requires indicator in panel)
- Motor: 3450 RPM, oil-filled, hermetically-sealed, thermal overload protection needs to be provided in control panel
- Maximum temperature for effluent or dewatering: 104° F
- Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
- Upper ball bearing and lower ball bearing running in bath of oil
- Neoprene square ring seals
- Passes 3/4" spherical solids
- Major width: 13-5/16"
- Major height: 23-9/32"
- 100% computerized testing and 100% tested submerged in water
- Corrosion-resistant, powder coated epoxy finish with stainless steel screws and handle
- Control panel is required with this nonautomatic unit
Control Panel Options
Below are Zoeller control panels that can be used with this pump.
Brand | Zoeller |
Mfg. Number | 161-0105 |
Series | X160 |
Model | GX161 |
Product Type | Explosion proof high head effluent pump |
Application | Effluent/Dewatering |
Operation | Manual |
Horsepower | 1/2 HP |
Voltage | 460 Volts |
Phase | 3 |
Frequency | 60 Hz |
Speed | 3450 RPM |
Pump Casing | Cast iron |
Maximum Flow | 100 GPM |
Maximum Total Head | 56 ft |
Discharge Connection | 1-1/4" NPT vertical flange |
Maximum Current | 2.9 Amps |
Impeller Design | Non-clogging |
Power Cord Length | 25 ft |
Impeller Material | Bronze |
Maximum Temperature (Continuos) | 104°F |
Overload Protection | Control panel required |
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*