Zoeller 189-0004, Model E189 High Head Effluent Pump, 2 HP, 230 Volts, 1 Phase, 17.1 Amps, 1-1/2" Discharge, 145 GPM Max, 110 ft Max Head, 20 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
FEATURES
Zoeller "Flow Mate" Submersible Effluent Pump
- Corrosion-resistant, powder coated epoxy finish
- Durable cast iron switch case, base, motor and pump housing
- Bronze non-clogging vortex impeller design
- Stainless steel carbon and ceramic rotary shaft seal
- Oil filled, hermetically sealed, automatic reset thermal overload protection
- Neoprene square ring & gasket
- Upper and lower ball bearing running in bath of oil
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Maximum temperature for effluent or dewatering: 130°F
- 1-1/2" NPT discharge
- Passes 3/4" spherical solids
- Stainless steel handle for easy installation and removal
- Hermetically sealed to be watertight and dust tight
- For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Control Panel Options
Below are the control panels that can be used with this pump:
Note: Image is illustrative and may not reflect details of actual product.
The Zoeller 180,190 series high head "Flow-Mate" effluent/sump pumps are designed for high head effluent, groundwater, and general dewatering applications. They can pump effluent or groundwater. The Zoeller 180,190 series pumps are typically used in a septic tank, low pressure pipe (LPP), and in a enhanced flow step system settings. The Zoeller 180,190 series pumps are made of rugged cast iron, with an epoxy powder coated finish for extra corrosion protection. The impeller is a non-clogging bronze vortex. The upper and lower sleeve bearings run in a bath of oil, the shaft seal is made of carbon and ceramic, the bolts, screws, handle, guard, arm and seals are all stainless steel. There are no sheet metal parts to rust or corrode in the pump. The motor is 60 Hz, 3450 RPM, oil-filled, and hermetically-sealed with automatic reset thermal overload protection (in single phase models). Each pump can operate at water temperatures up to 130°F for effluent applications. This pump can pass up to ¾” spherical solids. Automatic models include a 2-pole mechanical float switch. All models include a standard 20 ft. UL listed 3-wire neoprene power cord with options for 25, 35 and 50 ft. The standard discharge size is 1-1/2" NPT with 2" and 3" flanges available. Pumps with the "185-186-188-189" prefix are single seal while pumps with the "41851-4186-4188-4189" prefix are double seal with improved bearing lubrication. The pumps in this grouping can pass ¾” spherical solids. Also included with this family is the Zoeller 191 single seal drip pump. The 191 has an enclosed impeller design which allows the pump to pass ⅝” spherical solids.Please note that automatic models are not recommended for use in effluent systems.
Zoeller 180 & 190 Series Effluent Pump |
Model Comparison Chart
Model | HP | Voltage | Phase | GPM | Head | Amps | Type |
D185 185-0003 | 1 | 230 | 1 | 85 | 73' | 9.8 | Auto |
E185 185-0004 | 1 | 230 | 1 | 85 | 73' | 9.8 | Non |
BE185 185-0015 | 1 | 230 | 1 | 85 | 73' | 9.8 | Auto |
D186 186-0003 | 1.5 | 230 | 1 | 58 | 114' | 13.7 | Auto |
E186 186-0004 | 1.5 | 230 | 1 | 58 | 114' | 13.7 | Non |
BE186 186-0010 | 1.5 | 230 | 1 | 58 | 114' | 13.7 | Auto |
D188 188-0003 | 1.5 | 230 | 1 | 145 | 91' | 14.0 | Auto |
E188 188-0004 | 1.5 | 230 | 1 | 145 | 91' | 14.0 | Non |
F188 188-0005 | 1.5 | 230 | 3 | 145 | 91' | 8.9 | Non |
G188 188-0006 | 1.5 | 460 | 3 | 145 | 91' | 4.6 | Non |
J188 188-0008 | 1.5 | 200-208 | 3 | 145 | 91' | 10.3 | Non |
BE188 188-0018 | 1.5 | 230 | 1 | 145 | 91' | 14.0 | Auto |
I188 188-0025 | 1.5 | 208 | 1 | 145 | 91' | 16.8 | Non |
D189 189-0003 | 2 | 230 | 1 | 145 | 110' | 17.1 | Auto |
E189 189-0004 | 2 | 230 | 1 | 145 | 110' | 17.1 | Non |
G189 189-0009 | 2 | 460 | 3 | 145 | 110' | 6.0 | Non |
I189 189-0012 | 2 | 230 | 1 | 145 | 110' | 20.5 | Non |
WD189 189-0027 | 2 | 230 | 1 | 145 | 110' | 17.1 | Auto |
E4185 4185-0004 | 1 | 230 | 1 | 85 | 73' | 9.8 | Non |
E4186 4186-0004 | 1.5 | 230 | 1 | 58 | 114' | 13.7 | Non |
E4188 4188-0004 | 1.5 | 230 | 1 | 145 | 91' | 14.0 | Non |
E4189 4189-0004 | 2 | 230 | 1 | 145 | 110' | 17.1 | Non |
E191 191-0004 | 2 | 230 | 1 | 45 | 137' | 14.5 | Non |
Performance Curve |
Dimensions |
BROCHURES |
Zoeller 180,190 Series Brochure |
INSTRUCTIONS |
Zoeller 180,190 Series Installation Instructions |
SPECIFICATIONS |
Zoeller 180,190 Series Specifications Sheet |
REPAIR PARTS |
Zoeller 180,190 Series Repair Parts List |
Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800 to speak to an expert today.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An Order
Inspector Pumphead & Our Customer Service Representatives Are AvailableMon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*