Zoeller 266-0004, Model E266, Waste-Mate 260 Series, Sewage Pump, 1/2 HP, 230 Volts, 1 Phase, 5.5 Amps, 2" NPT Discharge, 115 GPM Max, 20ft Max Head, 15 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Zoeller "Waste-Mate" E266 Sewage Pump
This submersible pump is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater, effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2" spherical solids. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
- Corrosion resistant powder coated epoxy finish
- Durable cast iron, switch case and pump housing
- Engineered plastic base
- Engineered plastic non-clogging impeller with metal inserts
- Stainless steel screws, bolts, handle, guard and arm and seal assembly
- Neoprene square ring & gasket
- Oil-filled, hermetically sealed motor
- Automatic reset thermal overload protection
- Oil lubricated bearings
- Carbon and ceramic shaft seal
- Passes 2" spherical solids
- 2 " NPT vertical discharge
- 15 ft, UL listed 3-wire neoprene cord and plug
- Completely submersible, watertight and dust tight
- For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Control Panel Options
Below are the control panels that can be used with this pump:
Note: Image is illustrative and may not reflect details of actual product.
|Product Type||Sewage Pump|
|Discharge Connection||2" NPT vertical|
|Pump Housing Material||Cast iron|
|Impeller Material||Engineered Plastic|
|Impeller Type||Non-clogging vortex|
|Maximum Flow||125 GPM|
|Maximum Head||22 ft|
|Maximum Solids Handling||2"|
|Cord Length||15 ft|
|Maximum Fluid Temperature||130°F|
Pump Products is now distributing the Zoeller 260 series "Waste-Mate" sewage/effluent pumps. There are three main sub types in the Zoeller Waste-Mate family: the Zoeller 266 series, the Zoeller 267 series and the Zoeller 268 series. Each pump is designed to operate in residential or light commercial application settings and is capable of moving raw sewage, groundwater (for general dewatering purposes) or effluent.
The Zoeller 266 series pumps have an engineered plastic base, while Zoeller 267 and Zoeller 268 models have a cast iron base. Impellers are non-clogging vortex design to pass solids. Impellers can either be engineered plastic (1 phase) or cast iron (3 phase). The Zoeller 267 models also have the option for a cast iron impeller. Other components, such as the screws, bolts, handle guard and seal assembly are all stainless steel. The shaft seal itself is carbon and ceramic, while the gasket is Neoprene. All in all, these pumps are extremely tough, corrosion resistant and able to handle any sewage commonly found in residential systems.
All pumps are completely submersible and hermetically sealed to be watertight and dust tight. Each close coupled motor runs at 1/2 horsepower. Most models have a 2" NPT discharge; Zoeller 268 models have a dual 2" NPT Female discharge and a 3" NPT Male discharge. Manual and automatic models are both available.
|Zoeller 260 Series "Waste-Mate" Sewage Pumps|
Model Comparison Chart
|Zoeller 260 Series Waste-Mate Brochure|
|Zoeller 260 Series Waste-Mate Installation Instructions|
|Zoeller 266 Repair Parts List|
|Zoeller 267 Repair Parts List|
|Zoeller 267 Repair Parts List II|
|Zoeller 268 Repair Parts List|
|Zoeller 260 Series Waste-Mate Specifications Sheet|
[caption id="attachment_3398" align="alignleft" width="150"] Zoeller 267 with tethered float switch[/caption] [caption id="attachment_3397" align="alignleft" width="150"] Zoeller 267[/caption] Pump Products application engineers are standing by to help you find the right pump, as well as to provide price quotes, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An OrderInspector Pumphead & Our Customer Service Representatives Are Available
Mon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*