Zoeller 270-0004, Model E270, Waste-Mate 270 Series, Sewage Pump, 1 HP, 230 Volts, 1 Phase, 7.5 Amps, 2" NPT Discharge, 132 GPM Max, 29 ft Max Head, 20 ft Cord, Manual
FREE SHIPPING ON THIS ITEM ! Offer applies to the lower 48 states and excludes Alaska, Hawaii, APO/FPO and international orders. Free standard shipping applies to U.S. orders only and to select items that meet UPS Standard Ground container/cube requirements. Free Shipping
Zoeller "Waste-Mate" E270 Sewage & Dewatering Pump
This submersible pump is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater, effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2" spherical solids. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
- Corrosion-resistant powder coated epoxy finish
- Durable cast iron motor housing, cap, and pump housing
- Engineered plastic base
- Engineered plastic non-clogging vortex impeller
- Stainless steel screws, bolts, and handle
- Motor - 1 HP, 60 Hz, 3450 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected
- Neoprene square ring & gasket
- Carbon and ceramic shaft seal
- Upper sleeve bearing and lower ball bearing running in a bath of oil
- 2" NPT vertical discharge
- Passes 2" spherical solids
- Maximum operating temperature 130° F
- 20 ft. UL Listed 3-wire neoprene cord and plug
- For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Control Panel Options
Below are the control panels that can be used with this pump:
Note: Image is illustrative and may not reflect details of actual product.
|Product Type||Sewage/Effluent pump|
|Discharge Connection||2" NPT vertical|
|Pump Housing Material||Cast iron|
|Impeller Material||Engineered plastic|
|Impeller Type||Non-clogging vortex|
|Maximum Flow||132 GPM|
|Maximum Head||28 ft|
|Maximum Solids Handling||2"|
|Cord Length||20 ft|
|Maximum Fluid Temperature||130°F|
Pump Products is now distributing the Zoeller 270 series and Zoeller 4270 series sewage pumps. Each pump in this series is submersible and designed to move sewage in residential or light commercial applications. These pumps can also move groundwater and effluent as well.
Each pump in the Zoeller 270/4270 series features a rugged cast iron volute and motor housing covered with a corrosion resistant powder coated epoxy finish, while the pump base is engineered plastic. The non clog vortex impeller is engineered plastic as well. The screws, bolts and carry handle are all made of fine stainless steel.The shaft seal is a composite of carbon and ceramic with a neoprene square ring and gasket. The motor (60 Hz, 3450 RPM) is oil-filled, hermetically sealed and thermally protected with an automatic reset.
Durability is an important issue for any wastewater pump and the Zoeller 270/4720 series pumps are pressure-tested and submerged to run before they leave the factory. These pumps are not affected by materials normally found in drainage and sewage sumps. The main difference between the two sub-series is that Zoeller 270 pumps have a single seal while Zoeller 4270 pumps have a double seal.
All pumps listed below are single phase operated. Automatic models include a variable level float switch.
|Zoeller 270 Series Sewage Pumps|
Model Comparison Chart
|Zoeller 270 Series Sewage Pump Brochure|
|Zoeller 270 Series Sewage Pump Instruction Manual|
|Zoeller 270 Series Sewage Pump Repair Parts List|
|Zoeller 270 Series Sewage Pump Specifications Sheet|
Pump Products application engineers are standing by to help you find the right pump, as well as to provide pricing, stocking availability and shipping information. Call our toll free number 1-800-429-0800.
Call Our Sales Counter For Assistance, Price Quotes, Availability & To Place An OrderInspector Pumphead & Our Customer Service Representatives Are Available
Mon-Fri 7:30 am to 5:00 pm EST
Call Toll Free: 800-429-0800
*Note: Picture is illustrative and may not reflect the actual product.*